Questions, answered straight
The things people ask before they call, and the things they wish they'd asked. If yours isn't here, (336) 392-8138 gets you Clark directly.
General
How do estimates work?
Free, and in two steps if you want them: a ballpark from photos and an address, then a firm written price after a site walk. The site walk is where we look at growth density, tree size, slope, water, access and what you want the ground to do afterward. The written scope says what comes out, what stays, how debris is handled and whether grading is included.
How far out do you work?
Roughly an hour and twenty minutes from Greensboro in every direction. That covers the entire Piedmont Triad, Danville and Martinsville in Virginia, Mount Airy and Elkin to the west, Salisbury, Albemarle and Sanford to the south, and Durham, Chapel Hill and Raleigh to the east.
How soon can you start?
Typically one to two weeks after the estimate, depending on season. Spring and fall book up fastest. Wet weather can push grading and heavy mulching back a few days because red clay won't carry a track machine without rutting when it's saturated.
Are you insured?
Yes. We carry liability coverage and can provide a certificate on request for builders, HOAs and commercial jobs.
Do you do small jobs?
Yes. A half-day of mulching along a fence line, a quick pad grade, a driveway regrade — if the equipment can get there, it's worth a call. We just try to batch smaller jobs by area so the mobilization stays reasonable for everybody.
Do you haul off debris or burn it?
Mulching leaves nothing to haul, which is why it's our default. When a job needs bare dirt, we'll pile what's left for you to burn under a Forest Service permit, or haul it on the dump trailer. Both are priced in the estimate so you can choose.
What's the difference between forestry mulching and land clearing?
Forestry mulching is one method of land clearing — grinding standing growth into chips that stay on the ground. 'Land clearing' is the broader outcome and can also involve felling bigger timber, pulling stumps, root raking and grading. Most residential jobs are mostly mulching with a little of the rest.
Can you work on a slope or near a creek?
Slopes, yes — track machines handle hillsides well and the mulch layer we leave is the best erosion control you can put on one. Near creeks we respect buffer rules, keep soil from moving toward the water, and will tell you up front if a riparian buffer applies to your property.
By service
How much does land clearing cost in North Carolina?
It depends almost entirely on how thick the growth is, how big the trees are, and what you want done with stumps and debris. Light brush and saplings on flat ground is the cheapest kind of clearing; dense mature hardwood with stumps pulled and the lot graded is the most expensive. We price per job after walking it, not from a per-acre chart, because two five-acre lots can be a day apart in work. The estimate is free.
Do I need a permit to clear land in NC?
For most residential clearing on your own property, no. Where it gets regulated is disturbing more than an acre (NC sediment and erosion control rules), working inside a stream or wetland buffer, or clearing in a town that has a tree-protection ordinance. We'll tell you if your lot trips any of those and point you to the right county office.
How much does forestry mulching cost per acre?
In our area, mulching is typically quoted by the job after a site walk rather than by a flat per-acre rate, because an acre of waist-high briars and an acre of 8-inch sweetgum are completely different days of work. Light growth clears fast and costs the least; dense, larger material takes longer. The estimate is free and includes a realistic time frame.
What size trees can a forestry mulcher handle?
Our setup handles trees up to roughly 8–10 inches in diameter in a single pass, and larger trees in stages. For anything bigger than that, felling with a saw and handling with the grapple is faster and cleaner.
What does land management include?
It's whatever keeps your acreage usable: bush hogging fields, mulching edges and fence lines, clearing invasive growth, reopening trails, grading farm roads and keeping ditches and culverts working. We build the plan around what you want the land to do.
How often does a property need maintenance?
Most Piedmont fields need bush hogging two or three times a year to stay open, especially for the first couple of years after clearing. Edges and fence lines usually need a mulcher pass every two to four years. Roads and ditches depend on how hard the storms hit.
How much does it cost to clear a lot in North Carolina?
The biggest drivers are tree size, density, and how much of the lot needs stumps out versus mulched over. A half-acre of saplings and privet with the chips left in place is the low end of what we do. A two-acre wooded lot with the house footprint stumped, raked and rough graded is several times that. We walk every lot before pricing it because the plat tells us the size but not the work. Estimates are free.
Do I need a permit to clear a lot in Greensboro or Guilford County?
For most residential lots under an acre of disturbance, no permit is required just to clear. Once you disturb more than an acre, North Carolina erosion and sediment control rules apply and the county wants a plan. Greensboro and some surrounding towns also have tree and buffer ordinances along streams. We'll tell you during the walk-through whether your lot touches any of that.
How much does brush clearing cost per acre in NC?
Brush clearing is the least expensive clearing we do because the material is small and the machine moves fast. Light briars and honeysuckle on flat, dry ground go quickly; a decade-old thicket with saplings mixed in takes longer and costs more. We quote after walking the property rather than from a flat per-acre rate, and the estimate is free.
What's the difference between brush clearing and land clearing?
Size of the material. Brush clearing is briars, vines, shrubs and saplings — generally under four to six inches. Land clearing involves real trees, stumps and usually some grading. If your property has both, we mulch the brush and handle the trees with a grapple or saw in the same visit.
How much does it cost to clear underbrush from wooded property?
It runs higher per acre than open brush clearing because the machine has to work carefully between trunks instead of mowing straight lines, but far less than clearing the trees themselves. Density of the privet, tree spacing and how clean you want the finish are the main drivers. We walk it and give you a written price — the estimate is free.
Will clearing underbrush hurt my trees?
Done carefully, no. We flag the keepers, keep a margin around each trunk, and cut low limbs rather than push through them. Mature oaks and poplars have deep enough roots that a track machine passing over the mulch layer doesn't bother them. We avoid running directly over the root flare of the biggest trees.
How much does it cost to clear a fence line?
Line work is priced by the length and the thickness of the growth, with the existing fence condition as the big wildcard — clearing beside a sound fence is faster than untangling thirty years of wire from trees. A few hundred feet of light hedgerow is a short morning. A half mile of grown-over perimeter with wire in the trees is a couple of days. We walk it first and give you a written number.
Can you clear a fence line without damaging the fence?
Yes, if the fence is in decent shape. The mulcher works to within a foot or so of the posts, and we finish right at the wire with a rotary cutter or by hand. Rotten posts and sagging wire will get flagged — sometimes the fence is held up by the brush and comes down when the brush does, and we'll tell you that before we start.
How much does right-of-way clearing cost?
Corridors are priced by length, width and growth, with the finish as the other variable. A quarter-mile utility strip in sapling sweetgum that just needs mulching is one price; the same quarter mile as a deeded access road with grading and stone is a bigger job. We walk the route and give a written number. If you want it kept open on a schedule, recurring visits are cheaper than a one-time rescue.
Who is responsible for clearing an easement in North Carolina?
It depends on what the recorded easement says. Many private access easements put maintenance on the party who benefits from it, some split it, and utility easements are usually the utility's responsibility inside the corridor — though they often only clear what their line needs. We'll read the language with you and tell you what we can clear and what somebody else should be paying for.
How much does commercial land clearing cost per acre in NC?
Commercial sites price higher per acre than residential because the finish standard is higher — full stump removal and raked footprints, haul-off instead of mulch left in place, and erosion control to a plan. Density and timber size still drive the number more than acreage. We walk the site with the plan in hand and give a written estimate the GC can put in the budget.
Do I need an erosion control permit for commercial clearing?
If the site disturbs more than an acre, yes — North Carolina requires an approved sediment and erosion control plan before land-disturbing activity starts, and Greensboro and several Triad counties run their own programs. Your civil engineer prepares the plan; we work to it and make sure the measures are in before we clear.
How much does it cost to reclaim an overgrown pasture?
Fields that have been let go five to ten years with pines under eight inches are the most economical — the mulcher runs fast and nothing needs hauling. Older fields with bigger timber take longer and may be worth logging first. Pulling stumps and removing chips for bare ground roughly doubles the work compared with mulching in place. We walk the field and give a written price, and the estimate is free.
How long before I can seed a mulched field?
If the chips stay in place, plan on mowing the resprouts through the first growing season and seeding the following fall after the mulch has broken down and you've limed. If you want grass faster, we rake the chips off and pull stumps so you can disc and seed within weeks. Most people take the slower, cheaper route.
How much does it cost to remove privet or kudzu?
Mulching a privet or kudzu infestation costs about what brush clearing does for the same acreage — it's fast work for the machine. Pulling the root crowns, digging bamboo, or committing to follow-up visits adds to it. The single biggest cost factor is whether you want it knocked back or want it gone, and we'll price both so you can choose. Estimates are free.
Will mulching kill privet?
No, and anybody who tells you otherwise is selling something. Mulching takes the privet to the ground and the mulch layer suppresses it for a season, but it resprouts from the root crown. What mulching does is make the infestation manageable — small resprouts you can mow, treat or pull instead of a ten-foot wall. Follow-up is part of the plan.
How much does it cost to cut a trail through the woods?
Trails are priced by length, width and how thick the woods are, with creek crossings and gravel as the add-ons. A quarter mile of walking path through open hardwoods is a short day. A mile of ten-foot UTV loop through privet with two creek crossings and gravel on the climbs is a multi-day job. We flag the route with you and give a written number. Estimates are free.
How wide should an ATV or UTV trail be?
Eight feet is the minimum for a side-by-side to pass comfortably, and ten feet gives you room on turns and lets two riders meet. Walking trails are fine at four to six feet. Equipment access for a tractor or truck wants twelve or more. We cut to the use and keep the turns gentle enough for whatever's riding it.
How much does it cost to clear a food plot?
A plot cleared to mulch with the stumps cut flush is the most economical — a half-acre to an acre is a short day. Pulling stumps for a plot you'll disc, rough grading it, and cutting lanes and access to go with it adds up from there. We walk the tract, lay out the whole plan, and give a written number. Most hunting clients get the lanes, plots and trails quoted together because it's one mobilization.
When is the best time to cut shooting lanes in NC?
Late winter through spring, after the season closes. The lanes have months to blend in before opening day, the deer aren't being pressured, and you can see the ground to lay them out. If you want a fresh trim before the season, early September is the latest we'd suggest — any closer to opening and you're putting fresh disturbance right where you'll be hunting.
How much does it cost to create defensible space around a house?
A thirty-foot mulched ring with limbing around a typical rural home is usually a day's work, and a longer firebreak along a property line is priced by its length and width. Fuel density, dead trees near the house, and whether the break goes to bare soil are the main variables. We walk it from the house out and give a written number. Estimates are free, and we'll tell you what actually matters on your ground.
How wide should a firebreak be?
Ten feet is a minimum for a mulched or bladed line on flat ground with light fuel. Twenty to thirty feet is better alongside a pine stand, a cutover or a slope. Around a house, thirty feet of cleaned ground is the standard defensible zone, with lighter thinning out to a hundred. Wider is better; the break has to be wide enough that embers and radiant heat don't cross it.
How much does bush hogging cost per acre in NC?
Mowing is the least expensive thing we do with the machine, and it's priced by acreage and growth. Tall grass and weeds on open, flat ground go fast. Briars, saplings and a field full of hidden junk take longer. Scheduled cuts cost less per visit than a one-time rescue because the growth never gets heavy. We give a written number after seeing the field, and the estimate is free.
What's the difference between bush hogging and forestry mulching?
The cutter handles grass, weeds, briars and saplings up to two or three inches, and leaves the material chopped on the ground. The mulcher grinds brush and trees up to eight or ten inches into chips. If your field has been let go long enough that the saplings are thicker than your thumb, it's a mulching job, and we'll tell you that rather than tear up the cutter.
How much does it cost to clean up a lot before selling it?
Less than most sellers expect, because pre-sale cleanup is scoped lighter than a full clear — mulching the understory and opening the frontage rather than pulling stumps and grading. A one- to two-acre wooded lot is often a day. Bigger acreage or a lot full of dumped junk takes longer. We walk it, give a written number, and the estimate is free. Compare it to the price difference between a lot buyers can walk and one they can't.
Does clearing a lot increase its value?
In our experience, it increases what buyers are willing to offer and how fast it sells, because they can see what they're getting and they're not pricing in a clearing job of their own. A mulched, walkable lot with the big trees standing shows better in photos and in person than either a thicket or a scraped-clay lot.
How much does grading cost in Greensboro NC?
It swings a lot. Correcting the slope around one side of a house is a few hours with one machine, and that's the low end. Rough and finish grading a full acre with fill brought in is a multi-day job and sits at the high end. The biggest cost drivers are how much dirt moves and whether material is trucked in or out. We walk the site and give a written number — no per-square-foot guesses over the phone.
How much slope should a yard have away from the house?
The standard target is about six inches of fall over the first ten feet from the foundation, which works out to five percent. Past that, one to two percent across the lawn is plenty to keep water moving without making it hard to mow. In our clay, the slope matters more than it does in sandy ground because the water isn't going to soak in — it has to run off.
How much does rough grading cost for a house lot?
The honest answer is that it's driven by how many yards of dirt have to move and whether any of it comes in on a truck. A fairly flat lot that just needs shaping and a pad roughed in is a day or two with one machine. A sloped lot that needs a deep cut on one side and a tall fill on the other, with fill delivered, is a bigger number. We give a written estimate after walking it, and we try to balance cut and fill on site to keep trucking out of it.
What's the difference between rough grading and final grading?
Rough grading moves the volume and gets the site within a few inches of its planned shape — cuts, fills, drainage pattern, pad location. Final grading is the last step after construction: smoothing, setting the exact slope, spreading topsoil and leaving it ready for seed or sod. Most new builds need rough grading before the foundation and final grading after the framers and trades are gone.
How much does final grading cost?
Most residential final grades land somewhere between a half-day and two days of machine time, plus the topsoil. A small lot with a clean site and a few inches of topsoil is the low end. A large lot with spoil piles to spread, debris to haul and several loads of topsoil is the high end. Topsoil is often the biggest single line item, so we'll tell you how many loads the lot needs before you commit.
How much topsoil do I need for a new lawn?
Three to four inches over the lawn area is a good target in our clay. Less than that and the grass roots hit clay and stall in the first dry spell; more than that is money you don't need to spend. A quarter acre of lawn at four inches works out to roughly 130 cubic yards, which is several trailer loads. We'll do that math on your lot.
How much does it cost to level a yard?
A single low spot or a side yard that just needs the slope corrected is a half-day job and the least expensive version. Regrading an entire back yard, digging out a settled area and bringing in several loads of topsoil is a full day or two and sits higher. Topsoil is often the biggest single cost, so we'll tell you how many loads it takes. The estimate is free and written.
Can you level my yard without killing the grass?
Partly. Where we only need to fill a shallow low spot or take down a small hump, we can keep the disturbance tight and the surrounding grass survives. Where the whole area needs cutting and filling, the existing lawn is going to be torn up and the honest move is to plan on reseeding or sodding it. We'll tell you which you're looking at.
How much does it cost to build a house pad in NC?
The cost is mostly in the dirt. A pad on a flat lot where the fill comes from the same site is a day or two of machine time and the low end. A pad on a slope that needs several feet of imported fill compacted in lifts, with geotech testing, is a bigger project and sits well above that. We stake it, measure the cut and fill, and give you a written number before anything moves.
Do building pads need to be compacted?
Yes, and it's the whole point. Loose clay settles for years, and anything built on it moves with it. We place fill in thin lifts and compact each one with the machine as it goes down. For slabs, steel buildings and anything with an engineered foundation, your builder may require tested density, and we work to the geotech's spec and coordinate their inspections.
How much does site prep cost for a new house in North Carolina?
It ranges widely because site prep is really five or six jobs rolled together. An open, fairly flat lot with a short driveway is the low end — mostly grading and a pad. A wooded, sloped lot with a long drive, big trees and imported fill is the high end. Clearing and the driveway are usually the two biggest line items. We walk it, sequence it, and give you one written price for the package.
What does site prep include?
Typically clearing and stump removal where the building, drive and septic go, stripping and saving topsoil, rough grading with drainage shaped in, a compacted pad built to the finished floor elevation, a driveway cut and based with stone, and a construction entrance. Culverts, utility trenches and a staging pad get added when the project needs them. The septic system and the foundation itself are licensed trades we prep for but don't perform.
How much does excavation cost per hour or per job in NC?
We usually price small digs by the job after seeing them, because the real cost drivers are depth, haul-off and what's in the way. A footing trench for a small addition is a few hours of machine time. Digging out and hauling off a buried brush pile the size of a car is a longer day plus the trailer loads. We'll tell you which you're looking at in a written estimate, free.
Can a mini excavator fit in my back yard?
Usually. Our mini needs about four and a half feet of clear width through a gate and the track loader needs closer to six. Side yards between houses in Triad subdivisions are often tight; we check that on the site visit and sometimes pull a fence panel and reset it afterward.
How much does it cost to trench a water line or power line?
Trenching is usually priced by the job based on length, depth and what's in the way. A short, clean run across a lawn for a water line is a few hours. A long run to a shop through roots and a drive crossing, dug deeper for power, takes most of a day plus backfill. We walk the route and give a written price. The pipe, wire and connections are priced separately by the trade installing them.
How deep does a water line need to be buried in North Carolina?
The frost line in the Piedmont is shallow, roughly twelve inches, so water lines are commonly set around eighteen inches deep to clear frost with margin and stay below tillers and fence posts. Your plumber or the county may have a specific requirement, and we dig to it. Power and gas have their own depths set by code and the installing trade.
How much does a pole barn pad cost in North Carolina?
Depends mostly on the slope and whether stone is included. A pad on nearly flat ground with the fill balanced on site is a day of machine work and the low end. A pad on a slope with several feet of fill on the low side, a crusher-run base and a drive to reach it is a bigger job. The building size matters less than the site. We stake it and give a written price after the walk-through.
How big should the pad be for my pole barn?
The building footprint plus working room — usually five to ten feet beyond each wall. That gives the post crew or concrete finishers space, keeps the pad edge from sloughing under the building, and gives roof runoff somewhere to land that isn't the wall line. If a lean-to or a future addition is planned, tell us and we'll size for it.
How much does it cost to prepare land for a mobile home in NC?
It depends on how much of the lot has to be cleared and how far the home has to travel from the road. An open lot near the road with a short drive is the low end — mostly a pad and some grading. A wooded lot with a long delivery route, a septic area to clear and trenching for utilities is the high end. We walk it with the home's dimensions in hand and give a written price for the full package, itemized so you can phase it.
What does the pad need to be for a manufactured home?
Level within a tight tolerance, compacted, free of topsoil and organics, and sized for the home plus room for the set-up crew. Most Piedmont counties inspect the pad before or during the set, and the installer will tell you the exact spec. We build it from compacted clay in lifts, laser-check it, and crown it slightly so it sheds water until the home goes on.
How much does it cost to clear a septic area?
A typical drain field and tank area is a fraction of an acre, so the cost is driven by how big the trees are and how many stumps have to come out rather than by acreage. A brushy area with saplings is a few hours. A field location in mature hardwoods with a dozen stumps to pull and backfill is most of a day. We walk the flagged area and give a written price. The free estimate is easy to combine with a pad or a driveway quote.
Should I clear the land before the septic soil evaluation?
No. The county soil scientist needs to see undisturbed ground, and running heavy equipment across the lot before the evaluation can compact the best soil and cost you the approved area or push you into a more expensive system type. Get the Environmental Health evaluation and improvement permit first, then clear to the flags.
How much does it cost to tear down a shed or barn?
The building itself usually comes down in a few hours. The cost is mostly in the hauling and disposal — how many trailer loads, what the landfill charges for the material, and whether a slab has to be broken out and hauled too. A wood shed with a dirt floor is the cheap end. A block building with a thick slab, full of junk, is the expensive end. We look at it and give a written price with the haul-off spelled out.
Do I need a permit to demolish a shed or barn in NC?
Many counties require a demolition permit for any structure, even outbuildings, and it's usually simple to get through the county inspections office. Utilities have to be disconnected and documented. If the building is old enough to possibly contain asbestos, the state requires a survey before demolition. We'll tell you what applies in your county before we start.
How much does dirt work cost?
It's mostly material plus machine time. Spreading a pile you've already had delivered is the simplest and cheapest version — a couple of hours of loader work. Hauling in and placing several loads of fill or topsoil costs more because the material and the trucking are the bigger part. Haul-off is priced per load. We give a written estimate with material and labor shown separately so you can see where the money goes.
What's the difference between fill dirt and topsoil?
Fill dirt is subsoil — in our area, red clay — used to build up or level ground that will carry a load. It compacts dense and drains poorly, and nothing grows in it. Topsoil is the darker, organic layer that plants root in. You use fill to get the ground to the right height and topsoil on the last few inches where grass or garden is going. Using one where the other belongs is the most common dirt mistake we fix.
How much does it cost to hire a skid steer with an operator?
For defined jobs — mulch this area, auger these holes, spread this gravel — we price the job after seeing it or a few photos. For a day of mixed tasks, we quote a day or half-day rate that includes the machine, the attachments and the operator. Mulching and brush cutting cost more per hour than bucket work because they're harder on the machine. Travel is stated up front. The estimate is free.
Is it cheaper to rent a skid steer or hire one with an operator?
Renting looks cheaper until you add the trailer, the attachments you actually need, the fuel, the learning curve and the day it takes to do what an experienced operator does in a morning. For a single afternoon of bucket work, rent. For mulching, brush cutting, grading or anything on a slope, hiring the operator is usually cheaper by the time the job's done and far less likely to end with a stuck or rolled machine.
How much does it cost to fix yard drainage in NC?
The spread is wide because the fixes are so different. Regrading a low spot and cutting a swale is a few hours of machine time. A full French drain system with catch basins, a hundred-plus feet of pipe and a daylight outlet is a multi-day job with a lot of stone and pipe in it. We quote after walking the lot and finding the outlet, and the estimate is free. We'll always tell you if a cheaper surface fix will do the job.
Why does my yard stay wet for days after it rains?
Red clay. The Cecil and Appling soils across the Piedmont have very slow infiltration rates, so rain that falls on a flat yard just sits until it evaporates. The fix is almost never to try to make the clay absorb more — it's to give the water a surface slope or a pipe so it leaves instead of waiting.
How much does a French drain cost in Greensboro NC?
Cost tracks the length and depth of the trench and how far the water has to be piped to an outlet. A short curtain drain along one side of a house with the outlet nearby is a day's work and a modest amount of stone. A long run with multiple basins, deep trench and a hundred feet of solid pipe to daylight is a bigger job with a lot more material. We quote per job after walking the site, free of charge.
How deep should a French drain be in clay soil?
Deep enough to intercept the water you're after. For surface water and shallow lawn drainage, 12 to 18 inches is typical. For a curtain drain protecting a crawlspace or foundation, it needs to be below the level you're protecting — often 24 to 36 inches. Depth matters less than fall and outlet; a shallow drain with good fall beats a deep one laid flat.
How much does it cost to install a driveway culvert in NC?
The main drivers are pipe size and length, whether an old pipe has to come out, and how much stone the backfill and end treatments take. A short 15-inch HDPE pipe on a private drive is a half-day job. A 24-inch, 40-foot pipe on a state road with riprap ends and a full ditch reshape is a bigger day with a lot more material. We give a free written estimate after seeing the site.
Do I need a permit to put a culvert in my driveway?
If your driveway connects to a state-maintained road, yes — NCDOT requires a driveway permit for a new entrance or a changed one, and the district office will specify the pipe size and length. There's generally no state permit for culverts on private roads or interior farm lanes, though stream crossings can trigger buffer rules. We'll tell you which situation you're in.
How much does erosion control cost?
It ranges from a few hours of grading and a bale of straw to a multi-day job with truckloads of riprap and a full slope rebuild. The main factors are how big the washed area is, how much stone has to be brought in and how steep the ground is. Catching it early is far cheaper — a six-inch rill is a grading fix, a four-foot gully is an excavation job. Estimates are free.
How do I stop erosion on a slope in red clay?
Three things, in order: keep water from concentrating on the slope by diverting it at the top, reshape the slope so what does run sheets off instead of channeling, and get cover on the clay — seed and straw, mulch or erosion blanket. Clay only erodes when it's bare and water is moving fast. Fix those two conditions and it stops.
How much does ditch cleaning cost?
It scales with length and how much has to come out. A couple hundred feet of driveway ditch with light silt is a short job. A long farm ditch with two feet of mud, trees on the banks and a buried culvert is a full day or more with haul-off. We price after walking the run and the estimate is free. Stone lining and culvert work are quoted separately so you can see what each piece costs.
Who is responsible for cleaning the ditch in front of my house?
On a state-maintained road, NCDOT is responsible for the roadside ditch itself, and you can request maintenance through their district office. The culvert under your driveway and anything on your own property is yours. On private roads and farm lanes, the ditches belong to whoever owns or maintains the road. We work on the private side — your driveway ditch, your field ditches, your swales.
How much does a gravel driveway cost in NC?
Length and base depth drive it. A short, flat driveway on firm ground with a modest base is the least expensive; a long drive through woods with a cut-and-fill grade, a culvert, fabric over soft ground and a thick base for truck traffic costs several times as much per foot. Stone is sold by the ton and a driveway takes a lot of it, so distance from the quarry matters too. We quote per job after walking the route — the estimate is free.
What kind of gravel is best for a driveway in North Carolina?
ABC crushed stone, also called crusher run, for the base and often for the whole driveway. It's a mix of angular rock and stone dust from the local quarries that compacts into a hard, water-shedding surface. #57 stone on top gives a cleaner look but stays loose and rolls underfoot. Pea gravel and river rock look nice and don't lock together at all — avoid them on anything with a slope.
How much does it cost to regrade a gravel driveway?
Regrading alone is a few hours of machine time and is the cheapest thing you can do for a driveway. Add stone and the price goes up with the tonnage. Washouts and soft spots that need excavation and rebuilding are priced by the section. We quote after walking the drive and the estimate is free; most repairs are a single day.
How often should a gravel driveway be regraded?
In Piedmont clay with normal use, every one to two years keeps the crown and drainage working and the stone where it belongs. Driveways with heavy traffic, steep grades or drainage problems need it more often. Waiting until potholes are deep means more stone and more time, so earlier is cheaper.
How much does it cost to build a farm road?
It comes down to length, how much clearing is in the way, how many crossings need pipe and how much of the road needs stone. A lane across firm, open pasture with no crossings is mostly blade work and costs little per foot. A road cut through timber with two culverts, water bars on a hillside and stone at the crossings costs much more per foot. We quote by section after walking it, so you can see where the money goes. Estimates are free.
Do farm roads need gravel the whole length?
Usually not. Firm, well-drained Piedmont clay with a proper crown and ditches will carry a tractor and a pickup most of the year without stone. Stone goes where the road sees the most traffic and the most water — the entrance, crossings and wet spots — and on the full length only if the road has to carry heavy trucks through the winter.
How much does storm tree cleanup cost?
The main factors are how many trees are down, how big they are, whether any are on structures or in dangerous positions, and what you want done with the wood. A single pine across a driveway that gets bucked and pushed aside is a quick job. Twenty trees down across five acres with root balls pulled and everything hauled is days of work. We quote after seeing it, free, and we'll prioritize getting you access over doing the whole job at once if that's what you need.
Do you do emergency storm cleanup?
We respond as quickly as we can during business hours after a storm and we'll fit genuine emergencies — a blocked driveway, a tree on a house — in ahead of other work where possible. We're not a 24-hour service and we don't claim to be. If a tree is on a power line, call the utility first; nobody should touch it until the line is confirmed dead.
How much does brush and debris removal cost?
The biggest factor is what happens to the material. Mulching brush on site is the least expensive because nothing leaves and nothing gets handled twice. Piling and stacking is in the middle. Hauling is the most expensive because it's trailer loads and dump fees. A single pile is a short job; a lot full of logging slash is a day or more. We quote after seeing it, free, and we'll show you the price for each option.
Can you mulch a brush pile instead of hauling it?
Yes, and for most piles it's the best answer. We spread the pile out with the grapple and run the forestry mulcher through it. Limbs, tops and saplings turn into chips that stay on the ground. Logs bigger than several inches don't mulch efficiently; those get grappled into a separate pile or hauled.
How much does root raking cost per acre?
It depends on how much is in the ground and how clean you need it. A mulched lot that needs one pass to expose dirt for a pad is quick. A dozer-cleared tract full of roots, stumps and rock that needs to be lawn-clean takes several passes and a lot of pile handling. We quote per job after walking it, free, and we'll tell you how many passes your end use actually needs.
What is root raking after land clearing?
It's pulling the roots, stump pieces, rocks and woody debris out of the top layer of soil after the trees are gone. A toothed rake on the front of a track loader goes through the dirt in passes, lifts the debris to the surface and windrows it, and the soil falls through. It's what makes cleared ground ready to grade, seed, disk or build on.
Free on-site estimate. Straight answer.
Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.