Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Driveways & Roads · Forsyth County · 45 min from Greensboro

Gravel Driveways for Clemmons & Forsyth County

Cut to grade, crowned, ditched and built on ABC stone — a driveway that's still a driveway in five years.

A&R Land Services installs gravel driveways in Clemmons — from the NCDOT permit question at the road to the last pass of the blade at the garage. We're only about 45 minutes from Clemmons, which matters on a job that moves this much stone.

A lot of Clemmons lots are wooded right to the road, so the driveway starts with clearing. We mulch the route, pull the stumps, and the chips go to the sides as erosion control while the roadbed is cut. It's one mobilization from Greensboro instead of a clearing contractor and then a driveway contractor.

Gravel driveway shoulders cleared through woods leading to a garage
Driveway cleared to the garage
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Clemmons ground conditions and how they shape gravel driveways

The Yadkin floodplain rules and Forsyth County's erosion control program shape how we work here. On the bluffs we mulch rather than scrape and seed every grade the same day, because the sandy clay cuts fast. Down in the bottoms we don't push equipment until summer, and we won't grade anything that changes the flood flow without the owner checking with the county. Sandy ridge ground near Clemmons will carry a machine most of the year, which makes it a good place to schedule winter mulching work.

Around Lewisville-Clemmons Road, Yadkin River and I-40, the properties we're usually called to look like this:

  • Inherited farm tracts out Hampton Road and Idols Road being opened up for family home sites
  • Yadkin bluff lots where owners want big oaks kept and the pine and privet mulched out
  • Two- to three-acre wooded infill lots off Harper Road and Peace Haven Road that need clearing and a pad before a custom build

What gravel driveways jobs look like around Clemmons

A typical Clemmons call for gravel driveways looks like this: Inherited farm tracts out Hampton Road and Idols Road being opened up for family home sites. We've handled that exact situation around I-40 and Peace Haven Road more times than we can count.

The other common one is Hunting cabins and recreational property that need a reliable entrance, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

If you're just outside Clemmons — Advance, Lewisville, Winston Salem or anywhere between — you're still inside our regular range.

Why Clemmons property owners call A&R

On a Clemmons driveway job the owner is the operator. Clark — veteran, firefighter — walks the route, writes the estimate and runs the machine that cuts the grade. What was discussed is what gets built.

Reach out to A&R Land Services for gravel driveway installation anywhere in Forsyth County — new entrances, long drives, construction access and everything between.

Gravel Driveways in Clemmons: questions

Do I need a permit for a new driveway in NC?

If the driveway connects to a state-maintained road, yes — NCDOT requires a driveway permit for a new entrance, and they'll specify the culvert size and sight-distance requirements. Driveways off private roads generally don't need a state permit, though some towns and counties have their own rules. We'll tell you what applies to your property.

How much does a gravel driveway cost in NC?

Length and base depth drive it. A short, flat driveway on firm ground with a modest base is the least expensive; a long drive through woods with a cut-and-fill grade, a culvert, fabric over soft ground and a thick base for truck traffic costs several times as much per foot. Stone is sold by the ton and a driveway takes a lot of it, so distance from the quarry matters too. We quote per job after walking the route — the estimate is free.

How far is A&R Land Services from Clemmons?

We're based in Greensboro, about 45 minutes from Clemmons. Forsyth County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle gravel driveways near Lewisville-Clemmons Road and Yadkin River?

Yes. We work throughout Clemmons and the surrounding Forsyth County area, including properties around Lewisville-Clemmons Road, Yadkin River and I-40. If you're outside the town limits, send the address and we'll confirm it's in range.

What does gravel driveways typically involve on a Clemmons property?

Replacing a mud track with a drive that works in winter is the most common version of it around Clemmons. We look at where the drive enters, how it climbs or crosses the property, where water will cross it and where it needs to end up. If the entrance is on a state road, we talk through the NCDOT permit. Length and width of the driveway is the factor that moves the price most on Forsyth County jobs, and we'll walk through it with you on site.

Gravel Driveways in Clemmons, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate