Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Skid Steer & Property Work · Davidson County · 1 hr from Greensboro

Skid Steer Services in Denton, NC

A high-flow track loader with the right attachment and the owner in the seat — for whatever your property needs.

The attachment makes the job, and we bring all of them to Denton. Forestry mulcher for the brush, auger for the fence, grapple for the storm debris, box blade for the drive. A&R Land Services covers Davidson County with one machine that does it all.

The ground around Denton is the reason we run tracks instead of wheels. Davidson County clay gets slick and soft after rain, and a wheeled skid steer digs itself a hole. Tracks float over it and leave less mark on the lawn.

Kubota tractor with tiller loaded on a gooseneck trailer behind the A&R truck on a gravel drive
Loaded and headed to the next job
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Denton ground conditions and how they shape skid steer services

Denton is in the far southern corner of Davidson County where the Uwharrie Mountains begin, and the ground is all slate belt: Badin, Tatum and Georgeville silt loam over slate and tuff on the slopes, Cid and Misenheimer on the wet flats, and Goldston on the ridgetops where rock is almost at the surface. High Rock Lake and Tuckertown Reservoir are on the west side and Lick Creek and Flat Swamp Creek drain the rest. Pines dominate the regrowth — loblolly, shortleaf and Virginia — with chestnut and post oak on the dry ridges and sweetgum in the hollows, and privet along every creek.

Around Tuckertown Reservoir, Silver Hill and NC-47, the properties we're usually called to look like this:

  • High Rock and Tuckertown lake lots at Healing Springs, Jackson Hill and along NC-47 with steep, rocky banks to thin for access and a view
  • Remaining farms on NC-109 and NC-49 needing pasture reclaimed from pine and poultry house pads cut
  • Fence rows and pond banks around Denton FarmPark-area farms grown up in cedar and privet

What skid steer services jobs look like around Denton

If you're near NC-47 or Lick Creek, odds are your situation is one we've already worked: high Rock and Tuckertown lake lots at Healing Springs, Jackson Hill and along NC-47 with steep, rocky banks to thin for access and a view, or brush cutting on overgrown pasture, field edges and lots.

The skid steer services approach for Davidson County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

If you're just outside Denton — Seagrove, Albemarle, Salisbury or anywhere between — you're still inside our regular range.

Why Denton property owners call A&R

We bring the full attachment set to Denton, not just the one you asked about. If a brush cutting job turns up a pile that needs the grapple or a rut that needs the blade, we swap and handle it.

Send a few photos of your Denton property and what you want done. We'll put a price on it and get you on the calendar.

Skid Steer Services in Denton: questions

What areas do you cover for skid steer work?

Greensboro and the Triad plus about an hour and twenty minutes out — up to the Virginia line, Mount Airy and Elkin, Salisbury, Albemarle and Sanford, Durham, Chapel Hill and Raleigh. For a half-day job, closer is better, and we'll be straight about the travel on the estimate.

How much does it cost to hire a skid steer with an operator?

For defined jobs — mulch this area, auger these holes, spread this gravel — we price the job after seeing it or a few photos. For a day of mixed tasks, we quote a day or half-day rate that includes the machine, the attachments and the operator. Mulching and brush cutting cost more per hour than bucket work because they're harder on the machine. Travel is stated up front. The estimate is free.

How far is A&R Land Services from Denton?

We're based in Greensboro, about 1 hour from Denton. Davidson County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle skid steer services near Tuckertown Reservoir and Silver Hill?

Yes. We work throughout Denton and the surrounding Davidson County area, including properties around Tuckertown Reservoir, Silver Hill and NC-47. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a skid steer services job in Davidson County?

Spreading delivered gravel, mulch, topsoil or stone is the most common version of it around Denton. Machine, attachments and operator arrive together. We work through the scope or the list, swap attachments as needed, and check in with you as we go. Attachments required — mulching and brush cutting are harder on the machine is the factor that moves the price most on Davidson County jobs, and we'll walk through it with you on site.

Skid Steer Services in Denton, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate