Grading in Haw River means dealing with the same clay every property in Alamance County sits on — it holds water, it compacts hard, and it punishes anybody who shapes it at the wrong moisture. We know the ground, we're about 32 minutes from Greensboro, and we grade it the way it has to be done here.
The lots we grade around Haw River usually share a problem: thin topsoil over clay that won't absorb much of anything. Water that lands on it has to run off, which means the slope has to be deliberate. We set it with a laser, not by eye, and we take special care at the foundation line where a few inches of fall makes the difference.



Haw River ground conditions and how they shape land grading
The river floodplain is the big constraint — anything in it is subject to flood rules, and we don't grade in the bottoms without the owner confirming what's allowed. Iredell clay on the terraces has to be dry to grade and ruts badly when it's not. Alamance County erosion control covers disturbance past an acre, and Haw River stream buffers apply along the river and its creeks. Invasive removal along the banks is best done in late summer when kudzu and knotweed are fully up and the crowns are easy to find.
Around Stony Creek, I-40 / I-85 and Lang Street, the properties we're usually called to look like this:
- Iredell clay terraces with standing water needing swales and ditching
- Riverbank parcels needing invasive removal and trail cutting within the buffer rules
- Thirty- to one-hundred-acre farms along NC-49 and Trollingwood-Hawfields Road reclaiming pasture and fence rows
What land grading jobs look like around Haw River
One job we see over and over near Lang Street: Iredell clay terraces with standing water needing swales and ditching. That's textbook land grading work, and it's usually a one-mobilization job for us.
Out toward Granite Mill the pattern changes — more Water pooling against a foundation or crawl space vent. The approach is the same, the time on site is what moves.
Either way, the first question we ask on a Haw River site walk is what the ground needs to do afterward, because that decides how far we take it.
We also cover land grading in Mebane, Saxapahaw and Graham, so if you've got property in more than one spot we can often batch the work.
Why Haw River property owners call A&R
We use a laser on every Alamance County grading job, from a small yard fix to a full pad. Plenty of outfits grade by eye and call it close enough. In clay that holds water, close enough is how you end up with the same puddle in a different spot.
If your Haw River property needs shaping, send us the address and a photo or two, or give us a call at (336) 392-8138. We'll come walk it.
Land Grading in Haw River: questions
Do I need a permit to grade my property in NC?
For most residential grading under an acre, no. If you disturb more than an acre, North Carolina's sediment and erosion control rules kick in and you'll need an approved plan, usually through the county or the state Division of Energy, Mineral and Land Resources. Towns can have their own stormwater rules on smaller areas. We'll tell you if your job trips a threshold.
What's the difference between grading and leveling?
Leveling makes ground flat. Grading makes it slope on purpose. A truly level yard holds water in our soils, so almost every job that starts as "I want it level" ends up as "I want it smooth with a gentle fall away from the house." That's grading, and it's what we do.
How far is A&R Land Services from Haw River?
We're based in Greensboro, about 32 minutes from Haw River. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle land grading near Stony Creek and I-40 / I-85?
Yes. We work throughout Haw River and the surrounding Alamance County area, including properties around Stony Creek, I-40 / I-85 and Lang Street. If you're outside the town limits, send the address and we'll confirm it's in range.
What does land grading typically involve on a Haw River property?
Yards that are too rough or sloped to mow safely is the most common version of it around Haw River. We walk the finished grade with you, show you where the water will go, and fix anything that's not right before the trailer gets loaded. Erosion control measures if the disturbed area is large is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.