Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Henry County · 1 hr 5 min from Greensboro

Land Grading for Martinsville & Henry County

Water goes where it should, dirt stays where you put it, and the ground is ready for what's next.

Grading in Martinsville means dealing with the same clay every property in Henry County sits on — it holds water, it compacts hard, and it punishes anybody who shapes it at the wrong moisture. We know the ground, we're about 1 hour 5 minutes from Greensboro, and we grade it the way it has to be done here.

The lots we grade around Martinsville usually share a problem: thin topsoil over clay that won't absorb much of anything. Water that lands on it has to run off, which means the slope has to be deliberate. We set it with a laser, not by eye, and we take special care at the foundation line where a few inches of fall makes the difference.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Martinsville ground conditions and how they shape land grading

Virginia's 10,000-square-foot erosion and sediment control threshold applies and Henry County administers it, so even a modest clearing job near a house often needs a plan. The Smith River has a public water intake and a riparian corridor. The slope is what we plan around: we mulch on contour, leave the root mat on anything steep, and put water bars on roads and trails. Gneiss and schist are close to the surface on the ridges, so pads and trenches get probed before we price them.

Around Leatherwood Creek, Fieldale and Fairy Stone State Park, the properties we're usually called to look like this:

  • Old tobacco farms along US-220, US-58 and toward Ridgeway and Axton reclaimed for cattle, hay or a homestead
  • Working cattle farms with fence rows lost to rose and autumn olive and farm roads that wash every spring
  • Smith River and Philpott cabin sites wanting clearing on a grade and a path to the water

What land grading jobs look like around Martinsville

Most of our land grading work in Martinsville comes from two directions. First, old tobacco farms along US-220, US-58 and toward Ridgeway and Axton reclaimed for cattle, hay or a homestead. Second, driveway, parking and gravel lot base shaping.

Both show up regularly along Fairy Stone State Park and Martinsville Speedway, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.

Danville, Mount Airy and Madison are in the same loop as Martinsville for us — same crew, same pricing basis.

Why Martinsville property owners call A&R

We use a laser on every Henry County grading job, from a small yard fix to a full pad. Plenty of outfits grade by eye and call it close enough. In clay that holds water, close enough is how you end up with the same puddle in a different spot.

If your Martinsville property needs shaping, send us the address and a photo or two, or give us a call at (336) 392-8138. We'll come walk it.

Land Grading in Martinsville: questions

How much slope should a yard have away from the house?

The standard target is about six inches of fall over the first ten feet from the foundation, which works out to five percent. Past that, one to two percent across the lawn is plenty to keep water moving without making it hard to mow. In our clay, the slope matters more than it does in sandy ground because the water isn't going to soak in — it has to run off.

Do I need a permit to grade my property in NC?

For most residential grading under an acre, no. If you disturb more than an acre, North Carolina's sediment and erosion control rules kick in and you'll need an approved plan, usually through the county or the state Division of Energy, Mineral and Land Resources. Towns can have their own stormwater rules on smaller areas. We'll tell you if your job trips a threshold.

How far is A&R Land Services from Martinsville?

We're based in Greensboro, about 1 hour 5 minutes from Martinsville. Henry County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle land grading near Leatherwood Creek and Fieldale?

Yes. We work throughout Martinsville and the surrounding Henry County area, including properties around Leatherwood Creek, Fieldale and Fairy Stone State Park. If you're outside the town limits, send the address and we'll confirm it's in range.

What does land grading typically involve on a Martinsville property?

Land being prepped to list, where a smooth lot shows better is the most common version of it around Martinsville. Strip and stockpile usable topsoil, cut the highs, fill the lows in lifts, and establish the drainage pattern. On clay we work it at the right moisture and track it in as we go. Whether topsoil, fill or stone has to be brought in or hauled off is the factor that moves the price most on Henry County jobs, and we'll walk through it with you on site.

Land Grading in Martinsville, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate