If you're putting a house, shop or barn on Roxboro land, the driveway is usually the first thing that has to exist — the builder's trucks need it before the foundation goes in. We build driveways throughout Person County that handle construction traffic and still look right when the house is done.
Long driveways on Roxboro acreage often have to cross a low spot or a seasonal draw somewhere between the road and the house. We put a properly sized pipe under those crossings and build the drive up over it, so the driveway doesn't become a dam in a thunderstorm.



Roxboro ground conditions and how they shape gravel driveways
Lake lots are the biggest share of our Roxboro work. Owners on Hyco and Mayo want privet and sweetgum cleared for a view, steep banks thinned for a path to the dock, and pads and driveways cut on lots that have been wooded since the lakes filled. Outside the lakes it is tobacco-country work: pasture reclamation and fence rows for the cattle operations along US-501, NC-49 and NC-57, house sites on old homeplaces off Leasburg Road and Semora Road, and hunting leases on the big timber tracts toward the Virginia line. Commercial clearing along US-158 and the Durham Road comes up now and then too.
Around Mayo Lake (Mayo Reservoir), NC-49 and US-501, the properties we're usually called to look like this:
- House sites on old homeplaces off Leasburg Road and Semora Road
- Hunting leases on timber tracts toward the Virginia line needing lanes, plots and roads
- Hyco Lake and Mayo Lake waterfront lots needing privet and sweetgum cleared for a view, banks thinned for dock access, and pads and driveways cut
What gravel driveways jobs look like around Roxboro
Most of our gravel driveways work in Roxboro comes from two directions. First, house sites on old homeplaces off Leasburg Road and Semora Road. Second, second entrances and access lanes to outbuildings.
Both show up regularly along US-501 and Hyco Lake, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.
Neighbors in Mebane, Hillsborough and Durham call us for the same work; Roxboro sits right in the middle of that route.
Why Roxboro property owners call A&R
We'll tell you straight if your Roxboro route has a problem — a wet draw that needs a bigger pipe, a slope that needs cut-and-fill, a soft spot that needs fabric. Better to know in the estimate than to find out the first winter.
Get your Roxboro lot connected to the road the right way. A&R builds driveways across Person County and we'd like to build yours.
Gravel Driveways in Roxboro: questions
Why does my gravel driveway keep turning to mud?
Because the stone is sitting on clay or topsoil with no compacted base, no crown and no ditch. Water soaks in, the clay turns to pudding and the stone sinks into it. The fix is to rebuild the base properly — strip the soft material, fabric if needed, compacted ABC, crown and drainage. Adding more gravel on top of the mud just feeds it more gravel.
Do I need a permit for a new driveway in NC?
If the driveway connects to a state-maintained road, yes — NCDOT requires a driveway permit for a new entrance, and they'll specify the culvert size and sight-distance requirements. Driveways off private roads generally don't need a state permit, though some towns and counties have their own rules. We'll tell you what applies to your property.
How far is A&R Land Services from Roxboro?
We're based in Greensboro, about 1 hour 15 minutes from Roxboro. Person County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle gravel driveways near Mayo Lake (Mayo Reservoir) and NC-49?
Yes. We work throughout Roxboro and the surrounding Person County area, including properties around Mayo Lake (Mayo Reservoir), NC-49 and US-501. If you're outside the town limits, send the address and we'll confirm it's in range.
How do you approach gravel driveways on Roxboro ground?
New homes, shops and barns on rural lots is the most common version of it around Roxboro. Trees and brush on the route get mulched or grappled, stumps come out, and the roadbed is cut to grade with crown and ditches. Soft spots are excavated and fixed. Culvert size and whether an NCDOT permit is required is the factor that moves the price most on Person County jobs, and we'll walk through it with you on site.