Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Land & Lot Clearing · Chatham County · 50 min from Greensboro

Siler City Land Clearing

Trees, brush, stumps and junk growth gone — ground you can actually use.

Land clearing in Siler City is a different job than it is in a flat coastal county. The slopes, red clay and creek bottoms around Siler City mean the method matters as much as the machine. We're based about 50 minutes away in Greensboro and we clear Chatham County lots and acreage the way the ground here demands it.

Siler City properties range from small in-town lots to large wooded tracts, and we size the approach to the parcel. On a half-acre lot we're in and out in a morning with a mulcher. On a twenty-acre tract we work in sections, flag the keeper trees, and bring the excavator for stumps where you plan to build or dig.

Cleared ground with a mulch layer along the tree line and fresh track marks in red clay
Mulch left along the edge holds the clay in place after clearing
Cleared road frontage with the A&R truck and gooseneck trailer parked at the top of the drive
Road frontage cleared, truck and trailer ready to load
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips

Siler City ground conditions and how they shape land clearing

Since the Wolfspeed and VinFast announcements, western Chatham has been under heavy development pressure. The megasite along US-421 at Moncure has pulled contractor yards, worker housing and new subdivisions toward Siler City, and we've picked up a lot of commercial clearing and rough grading on parcels along US-64, US-421 and the Siler City bypass that were chicken-house and cattle land five years ago. The rural work hasn't gone away either — reclaiming overgrown pasture around Bonlee, Bennett and Goldston is steady year-round.

Around the Siler City bypass, US-64 and Bennett, the properties we're usually called to look like this:

  • Former poultry and cattle farms along US-64 and US-421 being graded for contractor yards, storage and new housing
  • Wooded one- to five-acre home lots in new subdivisions off the bypass that need lot clearing and pad prep over shallow rock
  • Twenty- to one-hundred-acre pasture tracts around Bonlee, Bennett and Goldston reclaimed from cedar and pine

What land clearing jobs look like around Siler City

If you're near Bennett or the Rocky River, odds are your situation is one we've already worked: former poultry and cattle farms along US-64 and US-421 being graded for contractor yards, storage and new housing, or lots in town facing overgrowth code violations.

The land clearing approach for Chatham County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

If you're just outside Siler City — Liberty, Staley, Pittsboro or anywhere between — you're still inside our regular range.

Why Siler City property owners call A&R

Our customers in Chatham County tend to find us the same way: a neighbor had a lot cleared, it looked clean afterward, and they asked who did it. We'd like to keep earning work in Siler City that way, which means doing the job right, not just doing it.

Land clearing in Siler City starts with a conversation and a walk-through. Reach out today and let's get your ground open.

Land Clearing in Siler City: questions

Do I need a permit to clear land in NC?

For most residential clearing on your own property, no. Where it gets regulated is disturbing more than an acre (NC sediment and erosion control rules), working inside a stream or wetland buffer, or clearing in a town that has a tree-protection ordinance. We'll tell you if your lot trips any of those and point you to the right county office.

How long does it take to clear an acre?

Light to medium brush, a few hours to a day. Dense growth with larger trees, a day or two. Add time for stump removal and grading. We'll give you a realistic schedule in the estimate.

How far is A&R Land Services from Siler City?

We're based in Greensboro, about 50 minutes from Siler City. Chatham County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle land clearing near the Siler City bypass and US-64?

Yes. We work throughout Siler City and the surrounding Chatham County area, including properties around the Siler City bypass, US-64 and Bennett. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach land clearing on Siler City ground?

Wooded lots being prepared for a new home, shop or barn is the most common version of it around Siler City. Mulching first, then grapple work for anything oversized, then stumps and roots if the scope calls for it. On bigger tracts we work in sections so you can see progress and adjust. Average and maximum tree diameter — mulching gets slower above 8 inches is the factor that moves the price most on Chatham County jobs, and we'll walk through it with you on site.

Land Clearing in Siler City, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate