Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Driveways & Roads · Guilford County · 15 min from Greensboro

Farm Roads in Colfax, NC

Lanes you can drive a truck and trailer down in February — cut, ditched, piped and based.

Timber tracts, hunting land and working farms around Colfax all need access, and most of what we build in Guilford County is a lane that follows the ground, sheds water and carries weight at the crossings. Free estimates, and we'll flag the route with you.

Entrances off state roads around Colfax need an NCDOT driveway permit even for a farm lane, and the culvert has to meet their size. We've been through that with enough Guilford County landowners to tell you what the district office will want.

Long gravel farm road through bare winter woods with mulched edges and the track loader at the far end
Access road through the woods, edges cleared, machine at the top of the hill
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Colfax ground conditions and how they shape farm roads

Colfax sits between the airport and Kernersville along I-40 and US-421, and the land here is caught between two worlds — big airport-related industrial development on one side and old farm ground on the other. Soils are mostly Cecil and Appling red clay with some Wedowee on the higher ridges, and the Deep River headwaters along with Horsepen Creek cut shallow bottoms through it. Where the ground has been left alone it's loblolly and Virginia pine over sweetgum and privet, and the old road frontage is lined with Bradford pear that has escaped from the subdivisions.

Around Deep River headwaters, Sandy Ridge Road and US-421, the properties we're usually called to look like this:

  • Driveways off busy county roads that wash out and need regrading with proper drainage
  • Small farms behind the neighborhoods that have lost field edges to sweetgum and Bradford pear
  • Utility and access rights-of-way through the industrial corridor needing brush mowed and kept open

What farm roads jobs look like around Colfax

A typical Colfax call for farm roads looks like this: Driveways off busy county roads that wash out and need regrading with proper drainage. We've handled that exact situation around US-421 and Triad Center Drive more times than we can count.

The other common one is Interior farm roads that have to carry trucks, trailers and equipment year-round, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

We also cover farm roads in Jamestown, Oak Ridge and Kernersville, so if you've got property in more than one spot we can often batch the work.

Why Colfax property owners call A&R

On a Colfax farm road, Clark is on the machine — veteran, firefighter, owner. He walks the route with you, flags it with you and cuts it himself. There's nobody between you and the operator.

Reach out to A&R Land Services for farm road and access lane work anywhere in Guilford County — new cuts, reopened logging roads, crossings and entrances.

Farm Roads in Colfax: questions

How do you keep a farm road from washing out on a hill?

Water bars, outslope and ditches. Water bars are diagonal humps cut across the road every so often on a grade that shed water to the downhill side before it builds speed. Outsloping tilts the road surface slightly downhill so water sheets off. A ditch on the uphill side catches what comes down the slope. Stone at the bottom of the grade handles what still collects.

Can you reopen an old logging road?

Yes, and it's one of our favorite jobs. The grade and the crossings are already there under the growth. We mulch the lane open, pull the blowdowns and stumps, clean or replace the old culverts, regrade and put water bars back on the steep sections. It's almost always cheaper than cutting a new road.

How far is A&R Land Services from Colfax?

We're based in Greensboro, about 15 minutes from Colfax. Guilford County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle farm roads near Deep River headwaters and Sandy Ridge Road?

Yes. We work throughout Colfax and the surrounding Guilford County area, including properties around Deep River headwaters, Sandy Ridge Road and US-421. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a farm roads job in Guilford County?

Access lanes from the road to back fields, barns and ponds is the most common version of it around Colfax. We follow the lane with you, look at grade, wet spots, crossings and what the road has to carry. On a new route we flag it together so it follows the ground instead of fighting it. Soft ground requiring excavation, fabric or bridging stone is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.

Farm Roads in Colfax, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate