If you're building in Concord and the lot has been cleared, the pad is the next step. We're about 1 hour 10 minutes away in Greensboro, and we build pads to the builder's finished floor elevation with the fill compacted properly, because loose Cabarrus County clay is the main reason foundations here move.
Metal building and pole barn pads are a steady part of our Concord work. Those slabs are big and thin, which makes them sensitive to settlement, so the pad under them has to be uniformly compacted edge to edge. We build them with the overbuild the slab crew needs and check them with a laser.



Concord ground conditions and how they shape building pads
Concord is Cabarrus County's seat and the center of one of the fastest-growing stretches in the Charlotte region. The soils are the Charlotte-belt standard — Cecil and Pacolet on the ridges, Enon and Mecklenburg dark clay over diabase in the swales, Badin and Tatum slate soils showing up on the east side toward Mount Pleasant — with Chewacla along the Rocky River, Cold Water Creek and Three Mile Branch. The Mecklenburg and Enon belts are where equipment gets stuck and trenchers hit boulders; the slate side is firmer but rockier. Idle farmland goes to loblolly, sweetgum and a honeysuckle floor, with privet and kudzu along every creek.
Around Rocky River Road, Three Mile Branch and NC-73, the properties we're usually called to look like this:
- Commercial outparcels around Concord Mills and the speedway needing stumps pulled and debris hauled
- Church and school campuses with wooded acreage they want opened for parking, fields or trails
- Builder lots in the neighborhoods off NC-73 and Rocky River Road needing lot clearing and pad prep
What building pads jobs look like around Concord
One job we see over and over near NC-73: Commercial outparcels around Concord Mills and the speedway needing stumps pulled and debris hauled. That's textbook building pads work, and it's usually a one-mobilization job for us.
Out toward Midland the pattern changes — more New home sites on crawl space, slab or basement foundations. The approach is the same, the time on site is what moves.
Either way, the first question we ask on a Concord site walk is what the ground needs to do afterward, because that decides how far we take it.
If you're just outside Concord — China Grove, Albemarle, Kannapolis or anywhere between — you're still inside our regular range.
Why Concord property owners call A&R
We'll tell you up front whether your Concord pad needs engineered fill and geotech testing. We're not a general contractor or an engineer; we're the dirt crew, and we'd rather set you up right than have you find out later.
A&R Land Services is about 1 hour 10 minutes from Concord. Reach out and we'll get your Cabarrus County pad built before the footings are due.
Building Pads in Concord: questions
Do building pads need to be compacted?
Yes, and it's the whole point. Loose clay settles for years, and anything built on it moves with it. We place fill in thin lifts and compact each one with the machine as it goes down. For slabs, steel buildings and anything with an engineered foundation, your builder may require tested density, and we work to the geotech's spec and coordinate their inspections.
Can you build a pad on a sloped lot?
That's most of what we do. On a slope the pad is cut into the high side and filled on the low side, with the fill compacted in lifts so the downhill edge doesn't settle. Steep lots sometimes need a retaining wall or an engineered fill section; we'll tell you if yours is one of those before we quote it.
How far is A&R Land Services from Concord?
We're based in Greensboro, about 1 hour 10 minutes from Concord. Cabarrus County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle building pads near Rocky River Road and Three Mile Branch?
Yes. We work throughout Concord and the surrounding Cabarrus County area, including properties around Rocky River Road, Three Mile Branch and NC-73. If you're outside the town limits, send the address and we'll confirm it's in range.
What should I expect from a building pads job in Cabarrus County?
Concrete slabs for equipment sheds, carports and patios is the most common version of it around Concord. We walk it with your builder or foundation crew, confirm the corners and elevation, and leave it ready for footings or slab prep. Depth of cut and height of fill — sloped lots cost more than flat ones is the factor that moves the price most on Cabarrus County jobs, and we'll walk through it with you on site.