New driveway going in on a Denton property? The culvert is usually the first thing that has to be done and the first thing NCDOT asks about. A&R is a veteran and fireman owned crew out of Greensboro, and we handle driveway pipe installation across Davidson County from the permit question through the last load of gravel.
Farm lanes and long private drives in Davidson County often cross a draw or seasonal branch somewhere between the road and the house. Those crossings need pipe sized to the whole watershed above them, not just the ditch, and the ends need riprap so the first big rain doesn't scour them out.



Denton ground conditions and how they shape culverts
Denton is in the far southern corner of Davidson County where the Uwharrie Mountains begin, and the ground is all slate belt: Badin, Tatum and Georgeville silt loam over slate and tuff on the slopes, Cid and Misenheimer on the wet flats, and Goldston on the ridgetops where rock is almost at the surface. High Rock Lake and Tuckertown Reservoir are on the west side and Lick Creek and Flat Swamp Creek drain the rest. Pines dominate the regrowth — loblolly, shortleaf and Virginia — with chestnut and post oak on the dry ridges and sweetgum in the hollows, and privet along every creek.
Around Tuckertown Reservoir, Jackson Hill and the Uwharrie foothills, the properties we're usually called to look like this:
- Remaining farms on NC-109 and NC-49 needing pasture reclaimed from pine and poultry house pads cut
- Fence rows and pond banks around Denton FarmPark-area farms grown up in cedar and privet
- High Rock and Tuckertown lake lots at Healing Springs, Jackson Hill and along NC-47 with steep, rocky banks to thin for access and a view
What culverts jobs look like around Denton
A typical Denton call for culverts looks like this: Remaining farms on NC-109 and NC-49 needing pasture reclaimed from pine and poultry house pads cut. We've handled that exact situation around the Uwharrie foothills and the Montgomery County line more times than we can count.
The other common one is Farm lane and trail crossings over ditches and draws, which usually means a tighter work area and more care around what stays.
If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.
Seagrove, Thomasville and Salisbury are in the same loop as Denton for us — same crew, same pricing basis.
Why Denton property owners call A&R
If the driveway above the culvert on your Denton property also needs regraveling, ditching or regrading, we do all of that in the same trip from Greensboro. One contractor, one estimate, one finished entrance.
Driveway washing out at the road in Denton? Call or text (336) 392-8138 and we'll come look at the pipe, the ditch and the drainage area, and give you a free written estimate.
Culverts in Denton: questions
Do I need a permit to put a culvert in my driveway?
If your driveway connects to a state-maintained road, yes — NCDOT requires a driveway permit for a new entrance or a changed one, and the district office will specify the pipe size and length. There's generally no state permit for culverts on private roads or interior farm lanes, though stream crossings can trigger buffer rules. We'll tell you which situation you're in.
What size culvert do I need for my driveway?
It depends on how much water the ditch carries, which depends on the drainage area above it. 15 inches is a common minimum on quiet roads; 18 and 24 inches are common where the ditch drains a larger area. On state roads NCDOT decides. On private property we size to the drainage area with a margin, because an undersized pipe is the most common reason an entrance washes out.
How far is A&R Land Services from Denton?
We're based in Greensboro, about 1 hour from Denton. Davidson County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle culverts near Tuckertown Reservoir and Jackson Hill?
Yes. We work throughout Denton and the surrounding Davidson County area, including properties around Tuckertown Reservoir, Jackson Hill and the Uwharrie foothills. If you're outside the town limits, send the address and we'll confirm it's in range.
What should I expect from a culverts job in Davidson County?
Upsizing an undersized pipe that backs the ditch up is the most common version of it around Denton. We look at the ditch, estimate the drainage area, check for utilities and figure out whether the road is state-maintained. If it is, we'll walk you through the NCDOT driveway permit and what size pipe they'll require. Whether an old pipe has to be removed and hauled off is the factor that moves the price most on Davidson County jobs, and we'll walk through it with you on site.