Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Yadkin County · 50 min from Greensboro

Building Pads for East Bend & Yadkin County

A level, compacted pad your foundation crew can trust.

Every house, shop and barn in East Bend sits on a pad, and the pad decides whether the slab cracks. A&R Land Services builds compacted, laser-leveled pads across Yadkin County — stripped to clay, filled in lifts, shaped to drain, and ready for the foundation crew.

A lot of Yadkin County builders have been burned by a pad somebody scraped level and called done. On clay that pad holds water in the footing trench the first wet week. Ours get a crown and the surrounding ground graded away, so the foundation crew in East Bend is working on dry ground.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

East Bend ground conditions and how they shape building pads

Yadkin County administers erosion control at the one-acre threshold, and the Yadkin River corridor is in a water-supply watershed with stream buffers. The scheduling reality is that the river bottoms can be unworkable from December into May, so we book river work for late summer and early fall and keep the sandy ridges for the rest of the year. The uplands have occasional gneiss near the surface but far less rock than Surry County to the north.

Around the Yadkin River, Shore Road and Smitherman Road, the properties we're usually called to look like this:

  • Homestead splits off old tobacco farms needing pads, gravel drives and pole barn sites
  • Hunting leases on the river with trails, food plots and firebreaks to cut
  • Cattle and hay farms along NC-67 and Flint Hill Road with pastures gone to Virginia pine

What building pads jobs look like around East Bend

Most of our building pads work in East Bend comes from two directions. First, homestead splits off old tobacco farms needing pads, gravel drives and pole barn sites. Second, modular and manufactured home pads.

Both show up regularly along Smitherman Road and Divine Llama Vineyards, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.

We also cover building pads in Pilot Mountain, Lewisville and Boonville, so if you've got property in more than one spot we can often batch the work.

Why East Bend property owners call A&R

Being about 50 minutes from East Bend means we're available for the quick follow-up a foundation crew sometimes needs — a corner trimmed, a trench spoil moved — without a big mobilization charge.

Pad prep in East Bend done right means your foundation crew starts on time. Call (336) 392-8138 and let's get it scheduled.

Building Pads in East Bend: questions

How much does it cost to build a house pad in NC?

The cost is mostly in the dirt. A pad on a flat lot where the fill comes from the same site is a day or two of machine time and the low end. A pad on a slope that needs several feet of imported fill compacted in lifts, with geotech testing, is a bigger project and sits well above that. We stake it, measure the cut and fill, and give you a written number before anything moves.

How high should a building pad be above grade?

High enough that water runs off it in every direction. A few inches above surrounding grade with a slight crown is typical for a crawl space home; a slab pad gets set a specific depth below finished floor so the stone and concrete land at the right height. Your builder's finished floor elevation is the number we grade to.

How far is A&R Land Services from East Bend?

We're based in Greensboro, about 50 minutes from East Bend. Yadkin County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle building pads near the Yadkin River and Shore Road?

Yes. We work throughout East Bend and the surrounding Yadkin County area, including properties around the Yadkin River, Shore Road and Smitherman Road. If you're outside the town limits, send the address and we'll confirm it's in range.

What does building pads typically involve on a East Bend property?

Metal buildings, pole barns, workshops and detached garages is the most common version of it around East Bend. Fill placed in six-to-eight-inch layers and tracked in before the next goes on. Geotech density testing coordinated between lifts if the project requires it. Depth of cut and height of fill — sloped lots cost more than flat ones is the factor that moves the price most on Yadkin County jobs, and we'll walk through it with you on site.

Building Pads in East Bend, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate