Plenty of gravel driveways around East Bend are really just rock spread on clay, and they're mud by February. A&R is a veteran and fireman owned crew out of Greensboro, and the driveways we build in Yadkin County are stripped, crowned, ditched and compacted so they stay driveways.
Yadkin County quarries supply the ABC and #57 stone we use, which keeps hauling costs reasonable on East Bend driveways. We'll tell you how many tons the job takes and why, because the stone is a big part of the price and you should know where it's going.



East Bend ground conditions and how they shape gravel driveways
East Bend takes its name from the big loop the Yadkin River makes along the northeastern edge of the county, and the river is never far from a job here. Away from the water the soils are Fairview, Clifford and Pacolet — sandy, well drained, easy to run on — and the land rolls down to wide Chewacla and Riverview bottoms that were some of the best tobacco ground in the county. Those bottoms flood. The river frontage grows up in sycamore, box elder, river birch and a wall of privet and Japanese knotweed in spots, while the uplands go to Virginia pine and sweetgum after they're left idle.
Around Old Richmond, Smitherman Road and Flint Hill Road, the properties we're usually called to look like this:
- Cattle and hay farms along NC-67 and Flint Hill Road with pastures gone to Virginia pine
- Hunting leases on the river with trails, food plots and firebreaks to cut
- Homestead splits off old tobacco farms needing pads, gravel drives and pole barn sites
What gravel driveways jobs look like around East Bend
A typical East Bend call for gravel driveways looks like this: Cattle and hay farms along NC-67 and Flint Hill Road with pastures gone to Virginia pine. We've handled that exact situation around Flint Hill Road and Divine Llama Vineyards more times than we can count.
The other common one is Second entrances and access lanes to outbuildings, which usually means a tighter work area and more care around what stays.
If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.
We also cover gravel driveways in Boonville, Lewisville and Tobaccoville, so if you've got property in more than one spot we can often batch the work.
Why East Bend property owners call A&R
If the East Bend lot also needs clearing, a building pad, drainage or a culvert at the road, we do all of it in one trip from Greensboro. One contractor from the road to the house site.
Need a driveway built on East Bend land? Call or text (336) 392-8138 and we'll walk the route with you and put together a free written estimate.
Gravel Driveways in East Bend: questions
How thick should the gravel be on a new driveway?
Four to six inches of compacted ABC for a residential driveway on firm clay, more where trucks will run or the subgrade is soft. The thickness matters less than compaction and crown — six inches of loose stone on a flat, soft base will fail faster than four inches compacted on a crowned, firm one.
What kind of gravel is best for a driveway in North Carolina?
ABC crushed stone, also called crusher run, for the base and often for the whole driveway. It's a mix of angular rock and stone dust from the local quarries that compacts into a hard, water-shedding surface. #57 stone on top gives a cleaner look but stays loose and rolls underfoot. Pea gravel and river rock look nice and don't lock together at all — avoid them on anything with a slope.
How far is A&R Land Services from East Bend?
We're based in Greensboro, about 50 minutes from East Bend. Yadkin County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle gravel driveways near Old Richmond and Smitherman Road?
Yes. We work throughout East Bend and the surrounding Yadkin County area, including properties around Old Richmond, Smitherman Road and Flint Hill Road. If you're outside the town limits, send the address and we'll confirm it's in range.
What should I expect from a gravel driveways job in Yadkin County?
New homes, shops and barns on rural lots is the most common version of it around East Bend. We look at where the drive enters, how it climbs or crosses the property, where water will cross it and where it needs to end up. If the entrance is on a state road, we talk through the NCDOT permit. Culvert size and whether an NCDOT permit is required is the factor that moves the price most on Yadkin County jobs, and we'll walk through it with you on site.