A new gravel driveway in Yadkinville is a build, not a delivery. A&R Land Services cuts the route, grades the roadbed, sets the culvert and builds the base on compacted ABC stone for homeowners and builders across Yadkin County. We're about 55 minutes away in Greensboro and we'll walk the route with you before we quote.
Most of the new driveways we build around Yadkinville connect to a state secondary road, which means an NCDOT driveway permit and a culvert sized by the district office. We've been through that process enough times in Yadkin County to tell you what to expect and build to it.



Yadkinville ground conditions and how they shape gravel driveways
Vineyard work is a big part of what we do here. The Yadkin Valley AVA runs through the county and growers off US-601, Shacktown Road and toward Boonville and Hamptonville need land cleared, graded and fence-lined before they plant. Cattle farms along NC-67 and Courtney-Huntsville Road call for pasture reclamation and fence rows cut back. Ten- and twenty-acre homesteads are coming out of the old farms along the US-421 corridor, and those jobs are house pads, septic areas, gravel drives and a couple of acres of pasture opened up.
Around US-601, US-421 and Deep Creek, the properties we're usually called to look like this:
- Vineyard sites off US-601 and Shacktown Road needing brush cleared, blocks graded and fence lines opened
- Cattle and hay operations along NC-67 and Courtney-Huntsville Road with fence rows lost to honeysuckle and sweetgum
- Pole barn and equipment shed pads on working farms
What gravel driveways jobs look like around Yadkinville
A typical Yadkinville call for gravel driveways looks like this: Vineyard sites off US-601 and Shacktown Road needing brush cleared, blocks graded and fence lines opened. We've handled that exact situation around Deep Creek and NC-67 more times than we can count.
The other common one is Second entrances and access lanes to outbuildings, which usually means a tighter work area and more care around what stays.
If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.
If you're just outside Yadkinville — Lewisville, Elkin, East Bend or anywhere between — you're still inside our regular range.
Why Yadkinville property owners call A&R
Being about 55 minutes from Yadkinville keeps mobilization reasonable on a job that already has a lot of stone in the price. We'd rather you spend your budget on base depth than on our drive time.
For a gravel driveway in Yadkinville that still drives well in five years, call (336) 392-8138. We're about 55 minutes away in Greensboro.
Gravel Driveways in Yadkinville: questions
What kind of gravel is best for a driveway in North Carolina?
ABC crushed stone, also called crusher run, for the base and often for the whole driveway. It's a mix of angular rock and stone dust from the local quarries that compacts into a hard, water-shedding surface. #57 stone on top gives a cleaner look but stays loose and rolls underfoot. Pea gravel and river rock look nice and don't lock together at all — avoid them on anything with a slope.
How long does it take to build a gravel driveway?
A short residential drive on open ground can be done in a day. A long drive through timber with a culvert, grading and multiple stone lifts is two to four days depending on how much clearing and cut-and-fill is involved. Weather matters — we don't build base on saturated clay.
How far is A&R Land Services from Yadkinville?
We're based in Greensboro, about 55 minutes from Yadkinville. Yadkin County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle gravel driveways near US-601 and US-421?
Yes. We work throughout Yadkinville and the surrounding Yadkin County area, including properties around US-601, US-421 and Deep Creek. If you're outside the town limits, send the address and we'll confirm it's in range.
How do you approach gravel driveways on Yadkinville ground?
New homes, shops and barns on rural lots is the most common version of it around Yadkinville. We look at where the drive enters, how it climbs or crosses the property, where water will cross it and where it needs to end up. If the entrance is on a state road, we talk through the NCDOT permit. Culvert size and whether an NCDOT permit is required is the factor that moves the price most on Yadkin County jobs, and we'll walk through it with you on site.