Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Site Prep & Excavation · Rockingham County · 45 min from Greensboro

Eden Pole Barn Pads

A compacted, drained pad built to your building's footprint — ready for the post crew or the slab.

A pole barn or shop in Eden is only as good as the pad it sits on. A&R Land Services builds compacted, laser-leveled pads across Rockingham County — cut into the slope, filled in lifts, based with stone and graded so water goes around the building instead of through it.

Roof water is the thing most people overlook on a Eden barn pad. A shed roof dumps along one wall, and if the pad edge there isn't graded to carry it away, the building sits in a puddle every storm. We shape the surrounding ground for that on every Rockingham County pad.

Cleared pad area beside a new storage shed among pine trees with the property owner looking on
Shed site cleared and leveled between the pines
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Eden ground conditions and how they shape pole barn pads

We get a steady run of calls from the NC-14 and NC-87 corridors heading toward the Virginia line, where retirees from the Martinsville side are buying five to fifteen acres and want the understory gone and a house pad cut. Then there is the ag side: cattle and hay operations on Meadow Road, Boone Road and out toward Price that have lost fence lines to honeysuckle and sweetgum, and old tobacco fields along NC-770 that stand in thirty-year-old loblolly now. Riverfront lots on the Dan below the Smith confluence are another regular — owners want the privet knocked out so they can actually see the water.

Around Draper, Smith River Greenway and NC-14 (Van Buren Road), the properties we're usually called to look like this:

  • Former tobacco ground north of town standing in 30-year-old loblolly that owners want turned back into hay or pasture
  • Old textile-era industrial outparcels in Draper and Spray being cleaned up and rough graded for resale
  • Five to fifteen acre home sites along NC-14 and NC-87 toward the Virginia line needing a pad, driveway and perc area

What pole barn pads jobs look like around Eden

A typical Eden call for pole barn pads looks like this: Former tobacco ground north of town standing in 30-year-old loblolly that owners want turned back into hay or pasture. We've handled that exact situation around NC-14 (Van Buren Road) and Meadow Road more times than we can count.

The other common one is Metal shop buildings with concrete slabs, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

We also cover pole barn pads in Wentworth, Madison and Reidsville, so if you've got property in more than one spot we can often batch the work.

Why Eden property owners call A&R

Being about 45 minutes from Eden means we can come back after the posts are set to prep for the slab without charging you a second full mobilization.

A pole barn pad in Eden is usually a one or two day job. Call (336) 392-8138 and let's get it on the schedule.

Pole Barn Pads in Eden: questions

Can you build a pad on a hillside?

Yes, and most rural lots around the Triad require it. The pad is cut into the uphill side and filled on the downhill side, with the fill compacted in lifts so the low corner doesn't settle under the slab. Very steep sites may need a retaining wall on the cut side; we'll tell you if yours does.

How big should the pad be for my pole barn?

The building footprint plus working room — usually five to ten feet beyond each wall. That gives the post crew or concrete finishers space, keeps the pad edge from sloughing under the building, and gives roof runoff somewhere to land that isn't the wall line. If a lean-to or a future addition is planned, tell us and we'll size for it.

How far is A&R Land Services from Eden?

We're based in Greensboro, about 45 minutes from Eden. Rockingham County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle pole barn pads near Draper and Smith River Greenway?

Yes. We work throughout Eden and the surrounding Rockingham County area, including properties around Draper, Smith River Greenway and NC-14 (Van Buren Road). If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach pole barn pads on Eden ground?

RV and boat storage buildings is the most common version of it around Eden. We take the building dimensions from your supplier, confirm the location and the finished pad height, stake it with working overbuild, and set a laser benchmark. Clearing and stump removal needed in the footprint is the factor that moves the price most on Rockingham County jobs, and we'll walk through it with you on site.

Pole Barn Pads in Eden, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate