Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Drainage & Erosion · Alamance County · 30 min from Greensboro

Erosion Control for Graham & Alamance County

Gullies filled, slopes reshaped, water slowed down — before the clay ends up in the creek.

A&R Land Services repairs gullies, rebuilds slopes and gets cover back on bare ground in Graham. Most of the work is dirt and stone in the right places — slow the water, spread it out, armor what has to carry it — and we're only about 30 minutes from Graham.

Driveways and farm roads around Graham are frequent erosion sources — a ditch with no outlet, a crown that's gone flat, a culvert end with no stone. Fixing the road drainage is often the first and cheapest step toward stopping the erosion below it in Alamance County.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Graham ground conditions and how they shape erosion control

The Iredell and Enon clays are the challenge — they rut, they slick, and they shrink and crack in a dry spell. We grade them only after a dry stretch and use track machines. The Graham-Mebane Lake watershed overlay limits impervious cover and puts buffers on Back Creek and its branches. Alamance County erosion control handles disturbance past an acre. Drainage is part of nearly every job here: swales, ditch cleaning and French drains to get standing water off the flat clay and moving.

Around NC-54, NC-87 and Haw River, the properties we're usually called to look like this:

  • Fence-row and hedgerow clearing on old farms where the wire has disappeared into honeysuckle
  • Flat Iredell clay fields that need ditching and swales before they'll carry hay equipment
  • Twenty- to eighty-acre cattle and hay farms off NC-87, NC-49 and Swepsonville Road reclaiming pasture from cedar and privet

What erosion control jobs look like around Graham

If you're near Haw River or I-40 / I-85, odds are your situation is one we've already worked: fence-row and hedgerow clearing on old farms where the wire has disappeared into honeysuckle, or driveway and road ditches that are cutting deeper each season.

The erosion control approach for Alamance County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

Neighbors in Haw River, Mebane and Gibsonville call us for the same work; Graham sits right in the middle of that route.

Why Graham property owners call A&R

The guy on the machine on your Graham erosion job is Clark — veteran, firefighter, owner. He's the one who walks the slope with you, and he's the one who comes back after the first storm to make sure it held.

Don't let a small wash on your Graham property become a gully. Reach out to A&R Land Services for a free erosion control estimate anywhere in Alamance County.

Erosion Control in Graham: questions

How much does erosion control cost?

It ranges from a few hours of grading and a bale of straw to a multi-day job with truckloads of riprap and a full slope rebuild. The main factors are how big the washed area is, how much stone has to be brought in and how steep the ground is. Catching it early is far cheaper — a six-inch rill is a grading fix, a four-foot gully is an excavation job. Estimates are free.

What's the best erosion control after land clearing?

Leave the mulch. Forestry mulching puts a layer of wood chips on the ground that holds moisture, breaks the impact of rain and keeps the clay from moving. If you need bare ground for building, seed and straw it immediately and cut a diversion above the pad so runoff doesn't cross the disturbed area.

How far is A&R Land Services from Graham?

We're based in Greensboro, about 30 minutes from Graham. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle erosion control near NC-54 and NC-87?

Yes. We work throughout Graham and the surrounding Alamance County area, including properties around NC-54, NC-87 and Haw River. If you're outside the town limits, send the address and we'll confirm it's in range.

What does erosion control typically involve on a Graham property?

Bare lots waiting on construction through the storm season is the most common version of it around Graham. Riprap or stone in ditches, outlets and spillways. Seed, straw and mulch on everything disturbed, with erosion blanket on steeper slopes where seed alone won't hold. Amount of riprap, stone and fill brought in is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.

Erosion Control in Graham, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate