Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Site Prep & Excavation · Davidson County · 45 min from Greensboro

Lexington Pole Barn Pads

A compacted, drained pad built to your building's footprint — ready for the post crew or the slab.

Shop and barn pads are some of our favorite work in Lexington because the result is simple: a level, dry, solid piece of ground where there was a slope. A&R Land Services is about 45 minutes from Lexington and ready to build yours.

The acreage around Lexington where pole barns go up is mostly rolling pasture and woods edge, and the pad usually ends up partly in cut and partly in fill. The Davidson County clay from the cut makes excellent fill when it's placed in thin lifts and compacted, and that's how we build it.

Cleared pad area beside a new storage shed among pine trees with the property owner looking on
Shed site cleared and leveled between the pines
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Lexington ground conditions and how they shape pole barn pads

High Rock Lake drives a lot of our Lexington work. Lot owners at Southmont and along NC-8 and Cotton Grove Road want privet, sweetgum and honeysuckle cleared so they can see the water, and new buyers want pads and driveways cut on steep lake lots. The west side toward Linwood, Tyro and the Yadkin is farm country where cattle operations and old tobacco and grain farms need pasture reclaimed and fence rows found. Along I-85, US-64 and Old US-64 we clear and rough grade commercial parcels and small subdivisions, and in town we open infill lots in the older neighborhoods off Winston Road.

Around High Rock Lake, Leonard Creek and Abbotts Creek, the properties we're usually called to look like this:

  • Commercial parcels and small subdivisions along I-85, US-64 and Old US-64 needing clearing and rough grading
  • Infill lots in the older neighborhoods off Winston Road and South Main Street
  • High Rock Lake lots at Southmont and along NC-8 and Cotton Grove Road needing privet and sweetgum cleared for a view, plus pads and driveways on steep ground

What pole barn pads jobs look like around Lexington

A typical Lexington call for pole barn pads looks like this: Commercial parcels and small subdivisions along I-85, US-64 and Old US-64 needing clearing and rough grading. We've handled that exact situation around Abbotts Creek and I-85 more times than we can count.

The other common one is Metal shop buildings with concrete slabs, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

Neighbors in Salisbury, Wallburg and Thomasville call us for the same work; Lexington sits right in the middle of that route.

Why Lexington property owners call A&R

We build Davidson County pads in compacted lifts, not one big push. A pole barn slab is big and thin and finds every soft spot; a properly built pad means it doesn't find any.

Send us the footprint and the address in Lexington. We'll walk the site, look at the slope and drainage, and give you a written price.

Pole Barn Pads in Lexington: questions

Can you build a pad on a hillside?

Yes, and most rural lots around the Triad require it. The pad is cut into the uphill side and filled on the downhill side, with the fill compacted in lifts so the low corner doesn't settle under the slab. Very steep sites may need a retaining wall on the cut side; we'll tell you if yours does.

What areas do you build pads in?

Greensboro and all of the Triad, plus roughly an hour and twenty minutes out — Reidsville, Eden, Mount Airy, Elkin, Lexington, Salisbury, Albemarle, Asheboro, Sanford, Burlington, Durham, Chapel Hill and Raleigh.

How far is A&R Land Services from Lexington?

We're based in Greensboro, about 45 minutes from Lexington. Davidson County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle pole barn pads near High Rock Lake and Leonard Creek?

Yes. We work throughout Lexington and the surrounding Davidson County area, including properties around High Rock Lake, Leonard Creek and Abbotts Creek. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach pole barn pads on Lexington ground?

RV and boat storage buildings is the most common version of it around Lexington. We take the building dimensions from your supplier, confirm the location and the finished pad height, stake it with working overbuild, and set a laser benchmark. Slope of the site and the resulting cut and fill volume is the factor that moves the price most on Davidson County jobs, and we'll walk through it with you on site.

Pole Barn Pads in Lexington, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate