Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Rockingham County · 40 min from Greensboro

Rough Grading for Ruffin & Rockingham County

The heavy cut-and-fill that gives a site its shape before anything gets built on it.

A&R Land Services does the earth shaping for new construction in Ruffin and the rest of Rockingham County. Cut, fill, compact, drain. We balance material on site wherever the lot allows it, which keeps dump trucks off your road and money in your pocket.

Anything over an acre of disturbed ground in Rockingham County needs an erosion control plan before the first cut. We'll tell you up front whether your Ruffin rough grading job crosses that line, because finding out from an inspector mid-job is expensive.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Ruffin ground conditions and how they shape rough grading

Ruffin's creek heads are Helena and Worsham soils that stay saturated most of the winter, and we tell customers up front that low ground will be a spring or summer job. The uplands dry quickly and can be mulched through the cold months. Since most of this land drains to the Dan River, Rockingham County applies its erosion rules past an acre, but the bigger practical issue is keeping cleared slopes from washing into the ponds that nearly every farm here has. We leave mulch on the ground and seed the bare spots the same week.

Around the Caswell County line, Park Springs Road and NC-700, the properties we're usually called to look like this:

  • Farm ponds with banks grown up in willow and privet that need to be reopened
  • Large hunting leases near the Caswell County line needing lanes, food plots and interior roads
  • Cattle farms along Ruffin Stacey Road and NC-700 with pasture lost to cedar, pine and honeysuckle

What rough grading jobs look like around Ruffin

One job we see over and over near NC-700: Farm ponds with banks grown up in willow and privet that need to be reopened. That's textbook rough grading work, and it's usually a one-mobilization job for us.

Out toward Hogans Creek the pattern changes — more Driveway and farm road beds being roughed through a property. The approach is the same, the time on site is what moves.

Either way, the first question we ask on a Ruffin site walk is what the ground needs to do afterward, because that decides how far we take it.

If you're just outside Ruffin — Eden, Browns Summit, Reidsville or anywhere between — you're still inside our regular range.

Why Ruffin property owners call A&R

The person who reviews your Ruffin site plan is the person on the dozer blade. Clark is a veteran, a working firefighter and the owner of A&R Land Services, and he doesn't hand the job to a crew who've never seen the lot.

Ready to shape your Ruffin site? Reach out to A&R Land Services. We rough grade throughout Rockingham County and we're usually on site within a couple of weeks of the estimate.

Rough Grading in Ruffin: questions

What's the difference between rough grading and final grading?

Rough grading moves the volume and gets the site within a few inches of its planned shape — cuts, fills, drainage pattern, pad location. Final grading is the last step after construction: smoothing, setting the exact slope, spreading topsoil and leaving it ready for seed or sod. Most new builds need rough grading before the foundation and final grading after the framers and trades are gone.

How far out from Greensboro do you travel for grading?

About an hour and twenty minutes in any direction — the full Triad, up to Virginia, out to Mount Airy and Elkin, down to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh. Bigger rough grading jobs make the longer drives worthwhile.

How far is A&R Land Services from Ruffin?

We're based in Greensboro, about 40 minutes from Ruffin. Rockingham County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle rough grading near the Caswell County line and Park Springs Road?

Yes. We work throughout Ruffin and the surrounding Rockingham County area, including properties around the Caswell County line, Park Springs Road and NC-700. If you're outside the town limits, send the address and we'll confirm it's in range.

What does rough grading typically involve on a Ruffin property?

Sloped yards being terraced or opened up for use is the most common version of it around Ruffin. Swales, crowns and positive fall shaped in. We leave the site a few inches high for final grading and walk it with you or your builder. Depth of cuts and whether rock or roots are in the way is the factor that moves the price most on Rockingham County jobs, and we'll walk through it with you on site.

Rough Grading in Ruffin, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate