Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Drainage & Erosion · Chatham County · 50 min from Greensboro

Drainage in Siler City, NC

Standing water, soggy yards and wet crawlspaces fixed at the source — not with a bag of gravel.

Water that sits on Siler City clay for three days after a rain is more than an eyesore. It kills grass, rots sill plates, undermines driveways and breeds mosquitoes. We fix drainage problems across Chatham County with the right combination of dirt work and pipe for each lot.

Around Siler City, most of the yards we fix sit on Cecil or Appling clay with a thin layer of topsoil that the builder spread over it. Water can't get through the clay, so it sits in whatever low spot the lawn has. The fix is almost always surface slope to a swale or ditch, with pipe only where the surface can't be made to work.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Siler City ground conditions and how they shape drainage

Siler City is slate-belt ground almost everywhere — Georgeville, Badin and Tatum silt loams that are shallow over fractured slate and drain like a sieve. It's good mulching country because it stays firm, but once you need to dig a trench or cut a building pad the rock shows up fast and it changes what a job costs. The Rocky River runs just east of town and Loves Creek and Bear Creek drain the rest of the township. Pasture left idle here grows up in eastern red cedar and Virginia pine before anything else, and the old fence rows are solid with honeysuckle and multiflora rose.

Around the CAM megasite at Moncure, Alston Bridge Road and Bray Park, the properties we're usually called to look like this:

  • Twenty- to one-hundred-acre pasture tracts around Bonlee, Bennett and Goldston reclaimed from cedar and pine
  • Former poultry and cattle farms along US-64 and US-421 being graded for contractor yards, storage and new housing
  • Hunting tracts along the Rocky River and Bear Creek needing trails, food plots and firebreaks

What drainage jobs look like around Siler City

If you're near Bray Park or Siler City Municipal Airport, odds are your situation is one we've already worked: twenty- to one-hundred-acre pasture tracts around Bonlee, Bennett and Goldston reclaimed from cedar and pine, or lots that slope toward the house instead of away from it.

The drainage approach for Chatham County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

Neighbors in Pittsboro, Ramseur and Liberty call us for the same work; Siler City sits right in the middle of that route.

Why Siler City property owners call A&R

We don't sell drainage systems; we fix water problems. Plenty of Chatham County yards just need regrading and a swale, and we'll tell you that even though pipe would pay us more. When pipe is the right answer, we build it with fall to a real outlet so it works in a storm, not just on paper.

Send us a few photos of where the water sits on your Siler City property and we'll tell you what we think before we even drive out. Free estimates, straight answers.

Drainage in Siler City: questions

How much does it cost to fix yard drainage in NC?

The spread is wide because the fixes are so different. Regrading a low spot and cutting a swale is a few hours of machine time. A full French drain system with catch basins, a hundred-plus feet of pipe and a daylight outlet is a multi-day job with a lot of stone and pipe in it. We quote after walking the lot and finding the outlet, and the estimate is free. We'll always tell you if a cheaper surface fix will do the job.

What areas do you cover for drainage work?

We're based in Greensboro and work the whole Triad plus about an hour and twenty minutes in every direction — up to the Virginia line, west to Mount Airy and Elkin, south to Salisbury, Albemarle and Sanford, east to Durham, Chapel Hill and Raleigh.

How far is A&R Land Services from Siler City?

We're based in Greensboro, about 50 minutes from Siler City. Chatham County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle drainage near the CAM megasite at Moncure and Alston Bridge Road?

Yes. We work throughout Siler City and the surrounding Chatham County area, including properties around the CAM megasite at Moncure, Alston Bridge Road and Bray Park. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a drainage job in Chatham County?

Water coming off a neighbor's hillside onto your property is the most common version of it around Siler City. Regrade with the box blade or grading blade, cut trenches with the mini excavator, lay pipe and stone, set basins and emitters, and backfill. Pipe is laid with fall checked, not eyeballed. How much fall is available — flat lots take more design and more material is the factor that moves the price most on Chatham County jobs, and we'll walk through it with you on site.

Drainage in Siler City, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate