Plenty of gravel driveways around Siler City are really just rock spread on clay, and they're mud by February. A&R is a veteran and fireman owned crew out of Greensboro, and the driveways we build in Chatham County are stripped, crowned, ditched and compacted so they stay driveways.
Chatham County quarries supply the ABC and #57 stone we use, which keeps hauling costs reasonable on Siler City driveways. We'll tell you how many tons the job takes and why, because the stone is a big part of the price and you should know where it's going.



Siler City ground conditions and how they shape gravel driveways
Chatham County runs its own sediment and erosion control program and requires a plan over one disturbed acre; around Siler City that mostly affects the commercial work. The Rocky River corridor carries stream buffers. Rock is the bigger practical issue — we probe pads before we quote excavation so nobody gets surprised. For pasture and brush work the slate ground is a gift: we've run mulchers here in January when the Triassic clay fifteen miles east was impassable.
Around Bear Creek, Bennett and the CAM megasite at Moncure, the properties we're usually called to look like this:
- Twenty- to one-hundred-acre pasture tracts around Bonlee, Bennett and Goldston reclaimed from cedar and pine
- Hunting tracts along the Rocky River and Bear Creek needing trails, food plots and firebreaks
- Wooded one- to five-acre home lots in new subdivisions off the bypass that need lot clearing and pad prep over shallow rock
What gravel driveways jobs look like around Siler City
Around the CAM megasite at Moncure, the properties that call us for gravel driveways tend to be twenty- to one-hundred-acre pasture tracts around Bonlee, Bennett and Goldston reclaimed from cedar and pine.
Closer to NC-902 it's more often second entrances and access lanes to outbuildings — different layout, same machine, and the estimate reflects the difference honestly.
Siler City isn't one kind of ground, and we don't price it like it is.
We also cover gravel driveways in Pittsboro, Ramseur and Staley, so if you've got property in more than one spot we can often batch the work.
Why Siler City property owners call A&R
If the Siler City lot also needs clearing, a building pad, drainage or a culvert at the road, we do all of it in one trip from Greensboro. One contractor from the road to the house site.
Need a driveway built on Siler City land? Call or text (336) 392-8138 and we'll walk the route with you and put together a free written estimate.
Gravel Driveways in Siler City: questions
How much does a gravel driveway cost in NC?
Length and base depth drive it. A short, flat driveway on firm ground with a modest base is the least expensive; a long drive through woods with a cut-and-fill grade, a culvert, fabric over soft ground and a thick base for truck traffic costs several times as much per foot. Stone is sold by the ton and a driveway takes a lot of it, so distance from the quarry matters too. We quote per job after walking the route — the estimate is free.
How long does it take to build a gravel driveway?
A short residential drive on open ground can be done in a day. A long drive through timber with a culvert, grading and multiple stone lifts is two to four days depending on how much clearing and cut-and-fill is involved. Weather matters — we don't build base on saturated clay.
How far is A&R Land Services from Siler City?
We're based in Greensboro, about 50 minutes from Siler City. Chatham County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle gravel driveways near Bear Creek and Bennett?
Yes. We work throughout Siler City and the surrounding Chatham County area, including properties around Bear Creek, Bennett and the CAM megasite at Moncure. If you're outside the town limits, send the address and we'll confirm it's in range.
What does gravel driveways typically involve on a Siler City property?
New homes, shops and barns on rural lots is the most common version of it around Siler City. Clearing, grading, culvert, fabric if needed, base stone depth, surface stone, ditches and length. A clear scope and price, with options if you want to phase it. Culvert size and whether an NCDOT permit is required is the factor that moves the price most on Chatham County jobs, and we'll walk through it with you on site.