A&R Land Services is a veteran and fireman owned crew preparing pole barn and shop pads in Stokesdale and throughout Guilford County. Owner on the machine, laser at every corner, and a pad the erectors can lay out on the day they arrive.
Drive access matters on Guilford County shop sites. If the drive comes in uphill of the pad, we cut a swale or set a culvert so runoff doesn't ride the drive straight into the Stokesdale building. If it comes in downhill, we grade the approach so trailers can back in without dragging.



Stokesdale ground conditions and how they shape pole barn pads
Stokesdale is partly inside the Belews Lake and Haw River watershed areas, and anything that disturbs more than an acre runs through Guilford County's erosion control office. The Wedowee slopes need seed and mulch cover the same week you grade them, or the first storm will cut gullies. Dry months are July through October; the bottoms along the Haw will hold a track machine in winter only after a cold, dry stretch. We keep the heavy grading for the back half of the year and do mulching year-round on the ridge ground.
Around US-158, NC-68 and Belews Creek Road, the properties we're usually called to look like this:
- Hunting tracts on the Rockingham and Stokes county lines needing shooting lanes, trails and firebreaks
- Cattle and horse pasture reclamation where sweetgum and honeysuckle have taken the fence rows and field edges
- Twenty- to thirty-acre former tobacco allotments between the new subdivisions, grown up in loblolly and privet
What pole barn pads jobs look like around Stokesdale
A typical Stokesdale call for pole barn pads looks like this: Hunting tracts on the Rockingham and Stokes county lines needing shooting lanes, trails and firebreaks. We've handled that exact situation around Belews Creek Road and Angel Pardue Road more times than we can count.
The other common one is Detached garages and carports, which usually means a tighter work area and more care around what stays.
If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.
If you're just outside Stokesdale — Summerfield, Belews Creek, Mayodan or anywhere between — you're still inside our regular range.
Why Stokesdale property owners call A&R
We coordinate directly with the building crew in Guilford County. Corners, elevation, access for their trucks — the pad is where they need it when they need it.
Call or text (336) 392-8138 for a free pad estimate in Stokesdale. Send the building dimensions and we'll come stake it on the ground.
Pole Barn Pads in Stokesdale: questions
Do you put stone on the pad?
If the building has a gravel floor, yes — a compacted crusher-run base over the clay pad. If a slab is coming, the concrete contractor usually specifies the stone depth under it and we'll place it to their spec. On a pure clay pad with no stone, the first rain turns the floor to mud, so we recommend some base on nearly every one.
How much does a pole barn pad cost in North Carolina?
Depends mostly on the slope and whether stone is included. A pad on nearly flat ground with the fill balanced on site is a day of machine work and the low end. A pad on a slope with several feet of fill on the low side, a crusher-run base and a drive to reach it is a bigger job. The building size matters less than the site. We stake it and give a written price after the walk-through.
How far is A&R Land Services from Stokesdale?
We're based in Greensboro, about 25 minutes from Stokesdale. Guilford County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle pole barn pads near US-158 and NC-68?
Yes. We work throughout Stokesdale and the surrounding Guilford County area, including properties around US-158, NC-68 and Belews Creek Road. If you're outside the town limits, send the address and we'll confirm it's in range.
What does pole barn pads typically involve on a Stokesdale property?
Horse barns and run-in sheds is the most common version of it around Stokesdale. We take the building dimensions from your supplier, confirm the location and the finished pad height, stake it with working overbuild, and set a laser benchmark. Stone base — included or not, and how deep is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.