A rural lot in Walkertown without a driveway is hard to build on and hard to sell. We cut and build entrances and drives across Forsyth County, through woods, up slopes and across draws, and we size the base to what's actually going to drive on it.
The ground under a Walkertown driveway is almost always red clay, which is a fine subgrade when it's dry and firm and a terrible one when it's wet. That's why we strip to clay, crown the roadbed and get the ditches draining before any stone goes down on a Forsyth County drive.



Walkertown ground conditions and how they shape gravel driveways
Walkertown is on the northeast side of Forsyth between Winston-Salem and Belews Lake, on rolling Cecil and Appling clay with Wedowee on the sandier knolls. Salem Lake sits on its southwest edge and the whole southern part of town drains to it, which puts those parcels under Winston-Salem's water supply watershed rules. To the north the ground tips toward the Dan River basin and Belews Creek. This was tobacco and small-grain land, and the grown-up allotments are loblolly and sweetgum with privet, honeysuckle and poison ivy thick along every old fence row.
Around Main Street, NC-66 and US-158 (Reidsville Road), the properties we're usually called to look like this:
- Shop pads, gravel lanes and garden plots behind existing homes
- Horse and small cattle operations reclaiming pasture from privet and sweetgum
- Salem Lake watershed lots wanting selective, buffer-friendly clearing to open a view
What gravel driveways jobs look like around Walkertown
One job we see over and over near US-158 (Reidsville Road): Shop pads, gravel lanes and garden plots behind existing homes. That's textbook gravel driveways work, and it's usually a one-mobilization job for us.
Out toward Sullivantown Road the pattern changes — more Second entrances and access lanes to outbuildings. The approach is the same, the time on site is what moves.
Either way, the first question we ask on a Walkertown site walk is what the ground needs to do afterward, because that decides how far we take it.
If you're just outside Walkertown — Rural Hall, Belews Creek, Winston Salem or anywhere between — you're still inside our regular range.
Why Walkertown property owners call A&R
We build the base before we worry about the surface. Stripped subgrade, fabric if the ground is soft, ABC compacted in lifts, crown and ditches checked — that's why a driveway we build in Forsyth County needs a blade pass every couple of years instead of a rebuild.
Send us the address and a plat or sketch of where you want the drive on your Walkertown property, and we'll come look. Free estimates, straight answers.
Gravel Driveways in Walkertown: questions
What kind of gravel is best for a driveway in North Carolina?
ABC crushed stone, also called crusher run, for the base and often for the whole driveway. It's a mix of angular rock and stone dust from the local quarries that compacts into a hard, water-shedding surface. #57 stone on top gives a cleaner look but stays loose and rolls underfoot. Pea gravel and river rock look nice and don't lock together at all — avoid them on anything with a slope.
Do I need a permit for a new driveway in NC?
If the driveway connects to a state-maintained road, yes — NCDOT requires a driveway permit for a new entrance, and they'll specify the culvert size and sight-distance requirements. Driveways off private roads generally don't need a state permit, though some towns and counties have their own rules. We'll tell you what applies to your property.
How far is A&R Land Services from Walkertown?
We're based in Greensboro, about 28 minutes from Walkertown. Forsyth County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle gravel driveways near Main Street and NC-66?
Yes. We work throughout Walkertown and the surrounding Forsyth County area, including properties around Main Street, NC-66 and US-158 (Reidsville Road). If you're outside the town limits, send the address and we'll confirm it's in range.
What should I expect from a gravel driveways job in Forsyth County?
New homes, shops and barns on rural lots is the most common version of it around Walkertown. Final stone course spread and graded, edges feathered, entrance tied cleanly into the road, disturbed ground seeded. Drive it the same day. Culvert size and whether an NCDOT permit is required is the factor that moves the price most on Forsyth County jobs, and we'll walk through it with you on site.