Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Drainage & Erosion · Forsyth County · 28 min from Greensboro

Walkertown Culverts

Driveway pipe sized to the water, set to grade, bedded in stone — no more washed-out entrance.

A&R Land Services installs culverts and driveway pipe in Walkertown — state road entrances, private drives, farm lanes and ditch crossings. We're only about 28 minutes from Walkertown, which keeps the mobilization cost down on what's usually a one-day job.

Most of the Walkertown culvert jobs we do are on state-maintained secondary roads, where NCDOT sets the minimum pipe size and length through the driveway permit. We'll tell you what to expect from the district office and we build the entrance to meet it, because an entrance that doesn't pass inspection is one you'll be paying for twice.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Walkertown ground conditions and how they shape culverts

Growth along US-158 and NC-66 has brought subdivision lot clearing into Walkertown, but most of our calls are still from people with five to thirty acres off Old Hollow Road, Darrow Road, Sullivantown Road and Reidsville Road who want the back half of the property usable again. Pasture reclamation for horses and a few cattle, fence lines cut out, a shop pad and gravel lane, and a decent-sized garden or food plot are the common asks. The Salem Lake side gets selective clearing where owners want to see the water without scraping the buffer.

Around Sullivantown Road, Main Street and Old Hollow Road, the properties we're usually called to look like this:

  • Five- to thirty-acre homesteads off Old Hollow, Darrow and Sullivantown Road with overgrown back acreage and lost fence lines
  • Salem Lake watershed lots wanting selective, buffer-friendly clearing to open a view
  • Horse and small cattle operations reclaiming pasture from privet and sweetgum

What culverts jobs look like around Walkertown

A typical Walkertown call for culverts looks like this: Five- to thirty-acre homesteads off Old Hollow, Darrow and Sullivantown Road with overgrown back acreage and lost fence lines. We've handled that exact situation around Old Hollow Road and Baux Mountain Road more times than we can count.

The other common one is Entrances that flood or wash out every big storm, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

If you're just outside Walkertown — Stokesdale, Walnut Cove, Rural Hall or anywhere between — you're still inside our regular range.

Why Walkertown property owners call A&R

We handle the permit question up front. If your Walkertown driveway is on a state road, we'll tell you what NCDOT is going to require before we quote, so there's no surprise about pipe size or length after the fact.

Send us a photo of the ends of your Walkertown driveway pipe and we'll tell you whether it's crushed, undersized or just silted shut before we schedule the visit.

Culverts in Walkertown: questions

Can you replace a crushed culvert pipe?

Yes, and it's one of the most common jobs we do. The excavator pulls the old pipe, we clean out the silt, cut the trench to the right grade, set new pipe on stone bedding and rebuild the drive over it. If the old pipe was undersized or set too high, we fix that at the same time.

What areas do you install culverts in?

We work out of Greensboro and cover the whole Triad plus roughly an hour and twenty minutes out — north to the Virginia line, west to Mount Airy and Elkin, south to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh. Rural roads in every direction are where most of our culvert work is.

How far is A&R Land Services from Walkertown?

We're based in Greensboro, about 28 minutes from Walkertown. Forsyth County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle culverts near Sullivantown Road and Main Street?

Yes. We work throughout Walkertown and the surrounding Forsyth County area, including properties around Sullivantown Road, Main Street and Old Hollow Road. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach culverts on Walkertown ground?

Long driveways that cross a low spot or seasonal stream is the most common version of it around Walkertown. We look at the ditch, estimate the drainage area, check for utilities and figure out whether the road is state-maintained. If it is, we'll walk you through the NCDOT driveway permit and what size pipe they'll require. Material: HDPE, corrugated metal or reinforced concrete is the factor that moves the price most on Forsyth County jobs, and we'll walk through it with you on site.

Culverts in Walkertown, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate