A&R Land Services installs culverts and driveway pipe in Kernersville — state road entrances, private drives, farm lanes and ditch crossings. We're only about 20 minutes from Kernersville, which keeps the mobilization cost down on what's usually a one-day job.
Most of the Kernersville culvert jobs we do are on state-maintained secondary roads, where NCDOT sets the minimum pipe size and length through the driveway permit. We'll tell you what to expect from the district office and we build the entrance to meet it, because an entrance that doesn't pass inspection is one you'll be paying for twice.



Kernersville ground conditions and how they shape culverts
Kernersville has filled in fast along I-40, Business 40 and NC-66, and much of what we do is clearing one- to three-acre build lots in the subdivisions off Hopkins Road, Union Cross Road and Piney Grove Road. Behind that there's a strong commercial run — the Union Cross industrial area and the Kernersville Medical Parkway corridor keep turning out tracts that need wholesale clearing, root raking and rough grading. On the south and east edges toward Wallburg and Colfax there are still twenty-acre farm pieces where owners want pasture back and fence lines reopened.
Around I-40 / Business 40, NC-66 and Main Street, the properties we're usually called to look like this:
- One- to three-acre build lots off Hopkins Road, Union Cross Road and Piney Grove Road in loblolly and privet
- Subdivision yards with storm-dropped pines and leaning sweetgum that need cleanup and clearing
- Twenty-acre farm remnants toward Wallburg and Colfax reclaiming pasture and fence lines
What culverts jobs look like around Kernersville
Most of our culverts work in Kernersville comes from two directions. First, one- to three-acre build lots off Hopkins Road, Union Cross Road and Piney Grove Road in loblolly and privet. Second, entrances that flood or wash out every big storm.
Both show up regularly along Main Street and Hopkins Road, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.
Walkertown, Oak Ridge and Greensboro are in the same loop as Kernersville for us — same crew, same pricing basis.
Why Kernersville property owners call A&R
We handle the permit question up front. If your Kernersville driveway is on a state road, we'll tell you what NCDOT is going to require before we quote, so there's no surprise about pipe size or length after the fact.
Send us a photo of the ends of your Kernersville driveway pipe and we'll tell you whether it's crushed, undersized or just silted shut before we schedule the visit.
Culverts in Kernersville: questions
Why does my driveway wash out at the road every time it rains?
Usually one of three things: the culvert is too small for the ditch, it's set higher than the ditch bottom so water backs up and goes over the drive, or it's silted shut. Sometimes it's all three. A correctly sized pipe set at ditch grade with the ditch cleaned on both sides fixes it, and the gravel stays where it belongs.
What areas do you install culverts in?
We work out of Greensboro and cover the whole Triad plus roughly an hour and twenty minutes out — north to the Virginia line, west to Mount Airy and Elkin, south to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh. Rural roads in every direction are where most of our culvert work is.
How far is A&R Land Services from Kernersville?
We're based in Greensboro, about 20 minutes from Kernersville. Forsyth County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle culverts near I-40 / Business 40 and NC-66?
Yes. We work throughout Kernersville and the surrounding Forsyth County area, including properties around I-40 / Business 40, NC-66 and Main Street. If you're outside the town limits, send the address and we'll confirm it's in range.
How do you approach culverts on Kernersville ground?
Long driveways that cross a low spot or seasonal stream is the most common version of it around Kernersville. 811 marks come first. Then the mini excavator removes the old pipe or cuts the new trench to grade, matching the fall of the ditch so water doesn't pond at the inlet. Material: HDPE, corrugated metal or reinforced concrete is the factor that moves the price most on Forsyth County jobs, and we'll walk through it with you on site.