New driveway going in on a Colfax property? The culvert is usually the first thing that has to be done and the first thing NCDOT asks about. A&R is a veteran and fireman owned crew out of Greensboro, and we handle driveway pipe installation across Guilford County from the permit question through the last load of gravel.
Farm lanes and long private drives in Guilford County often cross a draw or seasonal branch somewhere between the road and the house. Those crossings need pipe sized to the whole watershed above them, not just the ditch, and the ends need riprap so the first big rain doesn't scour them out.



Colfax ground conditions and how they shape culverts
The Deep River side drains into High Point's water supply, and the county looks closely at larger clearing jobs near the creeks for sediment control. The Piedmont Triad Farmers Market area and the airport corridor have utility rights-of-way running everywhere, so we check for buried lines before we dig or rake. Red clay here is predictable — grade it dry, seed it fast, stay off it in February. The ridge ground off Bunker Hill Road is some of the firmest we work and will carry a machine in most weather.
Around Piedmont Triad International Airport, Old Mill Road and Sandy Ridge Road, the properties we're usually called to look like this:
- Wooded residential lots in the Sandy Ridge and Old Mill Road areas needing privet and pine cleared and a shop pad built
- Small farms behind the neighborhoods that have lost field edges to sweetgum and Bradford pear
- Utility and access rights-of-way through the industrial corridor needing brush mowed and kept open
What culverts jobs look like around Colfax
One job we see over and over near Sandy Ridge Road: Wooded residential lots in the Sandy Ridge and Old Mill Road areas needing privet and pine cleared and a shop pad built. That's textbook culverts work, and it's usually a one-mobilization job for us.
Out toward Bunker Hill Road the pattern changes — more Farm lane and trail crossings over ditches and draws. The approach is the same, the time on site is what moves.
Either way, the first question we ask on a Colfax site walk is what the ground needs to do afterward, because that decides how far we take it.
We also cover culverts in Greensboro, Oak Ridge and Kernersville, so if you've got property in more than one spot we can often batch the work.
Why Colfax property owners call A&R
If the driveway above the culvert on your Colfax property also needs regraveling, ditching or regrading, we do all of that in the same trip from Greensboro. One contractor, one estimate, one finished entrance.
Driveway washing out at the road in Colfax? Call or text (336) 392-8138 and we'll come look at the pipe, the ditch and the drainage area, and give you a free written estimate.
Culverts in Colfax: questions
How much does it cost to install a driveway culvert in NC?
The main drivers are pipe size and length, whether an old pipe has to come out, and how much stone the backfill and end treatments take. A short 15-inch HDPE pipe on a private drive is a half-day job. A 24-inch, 40-foot pipe on a state road with riprap ends and a full ditch reshape is a bigger day with a lot more material. We give a free written estimate after seeing the site.
What size culvert do I need for my driveway?
It depends on how much water the ditch carries, which depends on the drainage area above it. 15 inches is a common minimum on quiet roads; 18 and 24 inches are common where the ditch drains a larger area. On state roads NCDOT decides. On private property we size to the drainage area with a margin, because an undersized pipe is the most common reason an entrance washes out.
How far is A&R Land Services from Colfax?
We're based in Greensboro, about 15 minutes from Colfax. Guilford County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle culverts near Piedmont Triad International Airport and Old Mill Road?
Yes. We work throughout Colfax and the surrounding Guilford County area, including properties around Piedmont Triad International Airport, Old Mill Road and Sandy Ridge Road. If you're outside the town limits, send the address and we'll confirm it's in range.
What does culverts typically involve on a Colfax property?
Upsizing an undersized pipe that backs the ditch up is the most common version of it around Colfax. Gravel surface rebuilt over the crossing with a slight crown, edges feathered into the existing drive, and the road shoulder cleaned up. We'll check it after the first heavy rain. Whether an old pipe has to be removed and hauled off is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.