Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Drainage & Erosion · Guilford County · Home base from Greensboro

Greensboro Culverts

Driveway pipe sized to the water, set to grade, bedded in stone — no more washed-out entrance.

Rural roads around Greensboro have thousands of driveway culverts and a good share of them are crushed, rusted or silted shut. We replace them with properly sized HDPE or concrete pipe, bedded in stone, with the ends finished so they don't wash. Free estimates anywhere in Guilford County.

The red clay around Greensboro erodes fast at a pipe end. Every culvert we set in Guilford County gets riprap or a headwall at the inlet and outlet and a reshaped ditch on both sides, so the water goes through the pipe instead of around it.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Greensboro ground conditions and how they shape culverts

The big growth corridors are northwest toward Summerfield and Oak Ridge along US-220 and Battleground Avenue, east around McLeansville and the Piedmont Triad Farm, and south along US-421 toward the airport-adjacent industrial parks. Most of our Greensboro calls are two- to ten-acre infill parcels inside the loop (I-840/I-73) that were skipped over during earlier development because they were wooded or wet, plus larger tracts out past Lake Brandt and Lake Townsend where people are building on former tobacco farms.

Around North Buffalo Creek, Randleman Road and Lake Higgins, the properties we're usually called to look like this:

  • Older horse and hobby farms east toward McLeansville and north toward Browns Summit that have lost fence lines to privet and sweetgum
  • Commercial outparcels around Wendover Avenue, Gate City Boulevard and the airport that need brush knocked down and rough grading before a survey or sale
  • Overgrown infill lots inside the I-840 loop that developers passed over because they were wooded or near a creek buffer

What culverts jobs look like around Greensboro

If you're near Lake Higgins or the Fisher Park and Irving Park neighborhoods, odds are your situation is one we've already worked: older horse and hobby farms east toward McLeansville and north toward Browns Summit that have lost fence lines to privet and sweetgum, or entrances that flood or wash out every big storm.

The culverts approach for Guilford County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

High Point, Mcleansville and Oak Ridge are in the same loop as Greensboro for us — same crew, same pricing basis.

Why Greensboro property owners call A&R

On a Greensboro culvert job, Clark is the one on the excavator — veteran, firefighter, owner. He's set enough driveway pipe in Guilford County to know what washes out and what doesn't, and he builds yours in the second category.

Putting in a new entrance on a Greensboro property? Reach out to A&R Land Services before you call NCDOT — we'll walk you through the permit and the pipe size, and we install culverts all over Guilford County.

Culverts in Greensboro: questions

Do I need a permit to put a culvert in my driveway?

If your driveway connects to a state-maintained road, yes — NCDOT requires a driveway permit for a new entrance or a changed one, and the district office will specify the pipe size and length. There's generally no state permit for culverts on private roads or interior farm lanes, though stream crossings can trigger buffer rules. We'll tell you which situation you're in.

Can you replace a crushed culvert pipe?

Yes, and it's one of the most common jobs we do. The excavator pulls the old pipe, we clean out the silt, cut the trench to the right grade, set new pipe on stone bedding and rebuild the drive over it. If the old pipe was undersized or set too high, we fix that at the same time.

How far is A&R Land Services from Greensboro?

Greensboro is our home base. We're a Greensboro company, so mobilization in and around the city is as quick as it gets.

Do you handle culverts near North Buffalo Creek and Randleman Road?

Yes. We work throughout Greensboro and the surrounding Guilford County area, including properties around North Buffalo Creek, Randleman Road and Lake Higgins. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach culverts on Greensboro ground?

Long driveways that cross a low spot or seasonal stream is the most common version of it around Greensboro. Stone bedding, pipe set and checked for fall, then ABC stone backfilled in lifts and compacted around and over the pipe. Riprap or headwalls at the ends, ditch reshaped on both sides. Material: HDPE, corrugated metal or reinforced concrete is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.

Culverts in Greensboro, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate