Root raking is the step between cleared and usable, and it's the one that gets skipped. We rake behind our own clearing jobs in Walkertown and behind other people's, and the difference is ground you can seed or build on without hitting a root every three feet.
Piedmont ground around Walkertown has rock in it, and clearing brings it to the surface. The rake sorts rock out along with the roots; we pile it separately and it usually ends up lining a ditch or a culvert end somewhere on the property.



Walkertown ground conditions and how they shape root raking
Watershed rules on the Salem Lake side limit impervious cover and require stream buffers, so we keep mulch down and stay back from the drains. Forsyth County erosion control permits kick in past an acre. The ridge ground here is good year-round ground for a mulcher; the creek branches toward Belews and the lake coves stay soft until May. We see a lot of storm-dropped pines in the older subdivisions along US-158, and storm cleanup is a steady part of the Walkertown work.
Around NC-66, Sullivantown Road and Darrow Road, the properties we're usually called to look like this:
- Shop pads, gravel lanes and garden plots behind existing homes
- Subdivision lots along US-158 and NC-66 needing pine cleared and pads leveled
- Five- to thirty-acre homesteads off Old Hollow, Darrow and Sullivantown Road with overgrown back acreage and lost fence lines
What root raking jobs look like around Walkertown
Most of our root raking work in Walkertown comes from two directions. First, shop pads, gravel lanes and garden plots behind existing homes. Second, rocky Piedmont ground being prepared for finish grade.
Both show up regularly along Darrow Road and Salem Lake, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.
Neighbors in Walnut Cove, Stokesdale and Belews Creek call us for the same work; Walkertown sits right in the middle of that route.
Why Walkertown property owners call A&R
If the Walkertown ground also needs stumps pulled, grading, topsoil or seed, we do it in one trip. Raking is usually the middle of a job, not the whole job, and we handle the ends of it too anywhere in Forsyth County.
Cleared lot in Walkertown still too rough to use? Call or text (336) 392-8138 and we'll come look at what's in the ground and give you a free estimate for raking and grading it.
Root Raking in Walkertown: questions
How much does root raking cost per acre?
It depends on how much is in the ground and how clean you need it. A mulched lot that needs one pass to expose dirt for a pad is quick. A dozer-cleared tract full of roots, stumps and rock that needs to be lawn-clean takes several passes and a lot of pile handling. We quote per job after walking it, free, and we'll tell you how many passes your end use actually needs.
Can you rake a lot that somebody else cleared?
Yes. A lot of our raking is behind dozer work or mulching done by another contractor that left the ground rough. We look at what's in the soil, run the rake in passes, pile or mulch the debris and grade it. The lot ends up the way the clearing crew should have left it.
How far is A&R Land Services from Walkertown?
We're based in Greensboro, about 28 minutes from Walkertown. Forsyth County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle root raking near NC-66 and Sullivantown Road?
Yes. We work throughout Walkertown and the surrounding Forsyth County area, including properties around NC-66, Sullivantown Road and Darrow Road. If you're outside the town limits, send the address and we'll confirm it's in range.
What does root raking typically involve on a Walkertown property?
Mulched land that needs bare dirt for a lawn or a pad is the most common version of it around Walkertown. First pass pulls and windrows roots, stumps and rock. Crossing passes catch what's left. Windrows pushed together for the grapple. Grading, topsoil and seeding after the rake is the factor that moves the price most on Forsyth County jobs, and we'll walk through it with you on site.