Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Skid Steer & Property Work · Stokes County · 40 min from Greensboro

Bush Hogging in Walnut Cove, NC

Fields, lots and pasture edges knocked down before they turn into a clearing job.

A&R offers one-time cuts and scheduled mowing on Walnut Cove property — spring and late summer for most fields. Put it on the calendar once and the ground stays open without you thinking about it.

Reclaimed pasture in Walnut Cove needs two or three mowings the first year to beat the sweetgum and privet resprouts. We put those on the calendar when we finish the reclamation so the work holds.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Walnut Cove ground conditions and how they shape bush hogging

Walnut Cove lies in the Dan River Triassic basin on the east side of Stokes County, a few miles from Belews Lake and the Duke Energy plant. The basin dirt is Mayodan and Pinkston sandy loam over red mudstone, with Creedmoor on the flats that hold water, and the uplands outside the basin edge toward Germanton are Cecil and Pacolet red clay. Town Fork Creek runs through town to the Dan River, and its bottom is Chewacla silt that floods. Tobacco was everything here, and the old fields along NC-65 and NC-89 are now Virginia pine and sweetgum with privet and honeysuckle thick along the branches.

Around Walnut Cove Road, NC-65 and NC-89, the properties we're usually called to look like this:

  • Cattle farms on Brook Cove Road and NC-8 with pasture gone to pine and fence rows lost to honeysuckle
  • Town Fork Creek bottomland that floods and needs ditches cleaned and brush knocked back
  • Hunting tracts north toward Hanging Rock needing lanes, plots and interior roads

What bush hogging jobs look like around Walnut Cove

If you're near NC-89 or the Dan River, odds are your situation is one we've already worked: cattle farms on Brook Cove Road and NC-8 with pasture gone to pine and fence rows lost to honeysuckle, or reclaimed pasture that needs mowing to beat back resprouts.

The bush hogging approach for Stokes County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

Neighbors in Belews Creek, King and Stokesdale call us for the same work; Walnut Cove sits right in the middle of that route.

Why Walnut Cove property owners call A&R

The owner runs the cutter on every Walnut Cove job. Clark is a veteran and a working firefighter, and he walks the field first to find the fence, the rock and the junk before the blade finds them.

Keep your Walnut Cove ground open. Reach out to A&R Land Services for bush hogging anywhere in Stokes County.

Bush Hogging in Walnut Cove: questions

Can you mow steep or wet ground?

Better than a tractor can. The track machine climbs slopes that would roll a tractor and crosses soft ground without sinking. Saturated bottoms still need to dry some before any machine should be on them, but we can usually mow the rest of the field and come back for the low end.

Can you mow a lot that got a code violation notice?

Yes, and that's a common call. Greensboro, High Point, Burlington and most Triad towns enforce overgrowth ordinances on vacant lots. We can usually get a lot mowed within a few days of the call, and we'll leave the edges clean enough that the inspector signs off.

How far is A&R Land Services from Walnut Cove?

We're based in Greensboro, about 40 minutes from Walnut Cove. Stokes County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle bush hogging near Walnut Cove Road and NC-65?

Yes. We work throughout Walnut Cove and the surrounding Stokes County area, including properties around Walnut Cove Road, NC-65 and NC-89. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a bush hogging job in Stokes County?

Vacant lots facing overgrowth notices from the city or county is the most common version of it around Walnut Cove. A written price for a one-time cut, or a per-visit rate on a schedule — spring and late summer for most fields. No contract required, just a calendar. Obstacles — fence, rock, junk, wet spots — that slow the work is the factor that moves the price most on Stokes County jobs, and we'll walk through it with you on site.

Bush Hogging in Walnut Cove, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate