Red clay around Walnut Cove will leave the property a truckload at a time if nothing holds it. A&R is a veteran and fireman owned crew based in Greensboro, and we handle erosion control and slope stabilization for homeowners, farms and builders across Stokes County.
Where Walnut Cove property runs down to a creek or branch, erosion on the slope above is putting silt in the stream. We work from the top of the slope down, keep the buffer vegetated and build the fix so the water reaches the creek slow and clear instead of fast and red.



Walnut Cove ground conditions and how they shape erosion control
Walnut Cove lies in the Dan River Triassic basin on the east side of Stokes County, a few miles from Belews Lake and the Duke Energy plant. The basin dirt is Mayodan and Pinkston sandy loam over red mudstone, with Creedmoor on the flats that hold water, and the uplands outside the basin edge toward Germanton are Cecil and Pacolet red clay. Town Fork Creek runs through town to the Dan River, and its bottom is Chewacla silt that floods. Tobacco was everything here, and the old fields along NC-65 and NC-89 are now Virginia pine and sweetgum with privet and honeysuckle thick along the branches.
Around the Dan River, Walnut Cove Road and Belews Lake, the properties we're usually called to look like this:
- Town Fork Creek bottomland that floods and needs ditches cleaned and brush knocked back
- Hunting tracts north toward Hanging Rock needing lanes, plots and interior roads
- Belews Lake lots on the Stokes side around Pine Hall Road needing privet and sweetgum thinned for a view and a path to the water
What erosion control jobs look like around Walnut Cove
A typical Walnut Cove call for erosion control looks like this: Town Fork Creek bottomland that floods and needs ditches cleaned and brush knocked back. We've handled that exact situation around Belews Lake and Hanging Rock State Park more times than we can count.
The other common one is Driveway and road ditches that are cutting deeper each season, which usually means a tighter work area and more care around what stays.
If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.
Germanton, Belews Creek and Madison are in the same loop as Walnut Cove for us — same crew, same pricing basis.
Why Walnut Cove property owners call A&R
If the erosion on your Walnut Cove property is downstream of a drainage problem, a bad driveway or a slope that needs clearing, we handle all of it in one trip from Greensboro. One contractor who owns the whole slope, not just the gully.
If your Walnut Cove slope is washing, call or text (336) 392-8138. We'll walk it with you, show you where the water is concentrating and give you a free written estimate for a fix that holds.
Erosion Control in Walnut Cove: questions
Can you fix a gully in my yard or pasture?
Yes. We fill the gully with compacted fill, reshape the area so water doesn't concentrate there again, divert the runoff that caused it to a stable outlet, and cover the repair with seed and straw or mulch. If the gully is carrying a lot of water, the bottom gets lined with stone so it holds.
Do I need a permit for erosion control work in NC?
For small repairs on your own property, no. North Carolina's Sedimentation Pollution Control Act kicks in when you disturb more than an acre, and that requires an erosion and sediment control plan approved by the state or your county. Work inside a stream buffer has its own rules. We'll tell you if your project crosses either line.
How far is A&R Land Services from Walnut Cove?
We're based in Greensboro, about 40 minutes from Walnut Cove. Stokes County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle erosion control near the Dan River and Walnut Cove Road?
Yes. We work throughout Walnut Cove and the surrounding Stokes County area, including properties around the Dan River, Walnut Cove Road and Belews Lake. If you're outside the town limits, send the address and we'll confirm it's in range.
What should I expect from a erosion control job in Stokes County?
Bare lots waiting on construction through the storm season is the most common version of it around Walnut Cove. We trace where water concentrates, where it's cutting, and where it ends up. Most erosion problems start uphill of where the damage shows, so we look at the whole drainage path. Amount of riprap, stone and fill brought in is the factor that moves the price most on Stokes County jobs, and we'll walk through it with you on site.