Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Driveways & Roads · Stokes County · 40 min from Greensboro

Farm Roads for Walnut Cove & Stokes County

Lanes you can drive a truck and trailer down in February — cut, ditched, piped and based.

If there's an old logging road on your Walnut Cove land that's grown up in sweetgum and blowdowns, it's a few days of work from being a road again. We reopen them throughout Stokes County with a mulcher, a grapple and a blade, and the owner runs the machines.

Hunting land in Stokes County needs roads to stands, plots and the back line that a side-by-side or a truck can run in the rain without tearing up. We cut those with water bars on the grades and stone at the wet spots, and keep the rest as firm, drained clay.

Long gravel farm road through bare winter woods with mulched edges and the track loader at the far end
Access road through the woods, edges cleared, machine at the top of the hill
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Walnut Cove ground conditions and how they shape farm roads

Triassic basin clay is slow to dry and ruts deep when it is wet, so we schedule flat-ground and bottomland work for late spring through fall and keep the ridge jobs for winter. Belews Lake is a Duke Energy reservoir with shoreline rules, and Stokes County applies its erosion program past an acre, so lake lots get mulched with a buffer left at the water and silt fence staged before we start. Town Fork Creek has a buffer the county enforces. Rock is less of an issue here than in King or Danbury, which makes grading easier once the clay is dry.

Around Town Fork Creek, Pine Hall and NC-65, the properties we're usually called to look like this:

  • Town Fork Creek bottomland that floods and needs ditches cleaned and brush knocked back
  • Hunting tracts north toward Hanging Rock needing lanes, plots and interior roads
  • Belews Lake lots on the Stokes side around Pine Hall Road needing privet and sweetgum thinned for a view and a path to the water

What farm roads jobs look like around Walnut Cove

If you're near NC-65 or Brook Cove Road, odds are your situation is one we've already worked: town Fork Creek bottomland that floods and needs ditches cleaned and brush knocked back, or reopening old logging roads grown up in brush and blowdowns.

The farm roads approach for Stokes County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

Neighbors in Stokesdale, Mayodan and Belews Creek call us for the same work; Walnut Cove sits right in the middle of that route.

Why Walnut Cove property owners call A&R

Being about 40 minutes from Walnut Cove means a multi-day road job is a reasonable mobilization and a return visit to widen a crossing or fix a wet spot is a short trip, not a production.

Get the back forty on your Walnut Cove farm reachable in any weather. A&R is ready to cut the road.

Farm Roads in Walnut Cove: questions

How much does it cost to build a farm road?

It comes down to length, how much clearing is in the way, how many crossings need pipe and how much of the road needs stone. A lane across firm, open pasture with no crossings is mostly blade work and costs little per foot. A road cut through timber with two culverts, water bars on a hillside and stone at the crossings costs much more per foot. We quote by section after walking it, so you can see where the money goes. Estimates are free.

Do I need a permit to build a road on my farm?

Interior farm roads on your own land generally don't need a permit, and agricultural and forestry activities have exemptions from some state rules. Where you need to be careful is crossing a stream — buffer rules and sometimes a permit apply — and disturbing more than an acre outside an agricultural exemption. A new entrance on a state road needs an NCDOT driveway permit. We'll walk you through what applies.

How far is A&R Land Services from Walnut Cove?

We're based in Greensboro, about 40 minutes from Walnut Cove. Stokes County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle farm roads near Town Fork Creek and Pine Hall?

Yes. We work throughout Walnut Cove and the surrounding Stokes County area, including properties around Town Fork Creek, Pine Hall and NC-65. If you're outside the town limits, send the address and we'll confirm it's in range.

What does farm roads typically involve on a Walnut Cove property?

Hunting land access and roads to stands and food plots is the most common version of it around Walnut Cove. Culverts set at every ditch or draw the road crosses, sized to the drainage area, bedded on stone and armored at the ends with riprap. Length of road and how much of it needs clearing is the factor that moves the price most on Stokes County jobs, and we'll walk through it with you on site.

Farm Roads in Walnut Cove, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate