Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Site Prep & Excavation · Guilford County · 18 min from Greensboro

Whitsett Trenching

Clean trenches at the right depth for water, power, drain and conduit — locates called first, every time.

Trenching in Whitsett is a half-day job for most residential runs when the machine is about 18 minutes away. We're based in Greensboro, and we dig for homeowners, electricians, plumbers and septic installers throughout Guilford County.

A lot of Guilford County trenching is for outbuildings — power and water to a shop, a barn or a well house on rural property around Whitsett. Those are longer runs, and we keep the trench narrow and the backfill compacted so the pasture or lawn doesn't carry a sunken line for years.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Whitsett ground conditions and how they shape trenching

Commercial work drives a lot of our Whitsett calls: outparcels near the Rock Creek Center and the distribution corridor along Rock Creek Dairy Road that need brush knocked down, stumps pulled and a rough grade cut so a buyer can walk it. Around that, there's still plenty of rural residential ground along NC-61, Mt. Hope Church Road and the back roads toward Sedalia — five- to twenty-acre pieces where people are putting up a house, a pole barn and a gravel drive, and want the pine thicket mulched into something that looks like a yard.

Around I-85 / I-40, NC-61 and Mt. Hope Church Road, the properties we're usually called to look like this:

  • Creek-side parcels along Rock Creek and Big Alamance Creek where buffers limit what can be scraped
  • Old farm fence rows choked with honeysuckle and wild rose that owners want cut back to run new fence
  • Flat Iredell clay fields needing swales and ditching so they'll carry equipment

What trenching jobs look like around Whitsett

A typical Whitsett call for trenching looks like this: Creek-side parcels along Rock Creek and Big Alamance Creek where buffers limit what can be scraped. We've handled that exact situation around Mt. Hope Church Road and US-70 (Burlington Road) more times than we can count.

The other common one is Water service lines from the meter or well to the house, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

Gibsonville, Elon and Julian are in the same loop as Whitsett for us — same crew, same pricing basis.

Why Whitsett property owners call A&R

Our Whitsett trenches are backfilled in compacted layers and crowned, not dumped loose. Come back in a year and the yard is flat.

A&R Land Services trenches across Guilford County from Greensboro. Get in touch about your Whitsett line.

Trenching in Whitsett: questions

Where do you trench?

Greensboro and the Triad, plus about an hour and twenty minutes out in every direction — up to the Virginia line, Mount Airy and Elkin, Salisbury, Albemarle, Sanford, Durham, Chapel Hill and Raleigh.

Can you trench for a septic line?

We dig the trench; the licensed septic installer lays the pipe and the county inspects it. Same with gas, electrical and water — we do the dirt work for the licensed trade. If you don't have an installer yet, we can usually recommend a couple we've worked with.

How far is A&R Land Services from Whitsett?

We're based in Greensboro, about 18 minutes from Whitsett. Guilford County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle trenching near I-85 / I-40 and NC-61?

Yes. We work throughout Whitsett and the surrounding Guilford County area, including properties around I-85 / I-40, NC-61 and Mt. Hope Church Road. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach trenching on Whitsett ground?

Downspout and yard drain lines running to daylight is the most common version of it around Whitsett. 811 called, utilities marked, private lines discussed. We walk the route with you or the installer and set depth, width, start and end points. Access and distance from the trailer to the route is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.

Trenching in Whitsett, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate