If your building kit is on order and the site in Archdale isn't ready, we're about 25 minutes away in Greensboro and this is work we do every week. Pads for post-frame barns, metal shops, garages and storage buildings, built to your supplier's footprint.
Many Archdale buildings go up with a gravel floor first and a slab a year or two later. We build the pad with that in mind — compacted hard, crusher-run base on top — so the concrete contractor has a ready base when the budget allows.



Archdale ground conditions and how they shape pole barn pads
The Enon and Mecklenburg soils around Archdale are the ones to watch. They look fine in July and turn into sticky, heaving clay from November through March, and a pad graded wet on that dirt will give you trouble for years. We schedule Enon-ground grading for dry weather and compact in lifts. Deep River frontage along the Glenola side has steep banks where we mulch instead of grub. Anything draining to Muddy Creek is in the Randleman Lake watershed, so buffers and the lower acreage threshold apply there too.
Around Main Street (US-311 Business), Creekside Park and Hillsville Road, the properties we're usually called to look like this:
- Back-lot clearing for existing homeowners who want the wooded half acre behind the house opened up
- Infill home lots along Trindale Road, Hillsville Road and Weant Road being cleared for new construction
- Deep River frontage near Glenola with steep, wooded banks
What pole barn pads jobs look like around Archdale
Around Hillsville Road, the properties that call us for pole barn pads tend to be back-lot clearing for existing homeowners who want the wooded half acre behind the house opened up.
Closer to Bush Hill it's more often small commercial storage and contractor shops — different layout, same machine, and the estimate reflects the difference honestly.
Archdale isn't one kind of ground, and we don't price it like it is.
Neighbors in Jamestown, Asheboro and Sophia call us for the same work; Archdale sits right in the middle of that route.
Why Archdale property owners call A&R
Our Archdale pad estimates tell you the overbuild, the fill, the stone and the drainage work. If you want to add the driveway or clear more of the lot, it's itemized so you can see the cost.
A&R Land Services builds pads across Randolph County from Greensboro. Reach out about your Archdale building.
Pole Barn Pads in Archdale: questions
Can you build a pad on a hillside?
Yes, and most rural lots around the Triad require it. The pad is cut into the uphill side and filled on the downhill side, with the fill compacted in lifts so the low corner doesn't settle under the slab. Very steep sites may need a retaining wall on the cut side; we'll tell you if yours does.
What areas do you build pads in?
Greensboro and all of the Triad, plus roughly an hour and twenty minutes out — Reidsville, Eden, Mount Airy, Elkin, Lexington, Salisbury, Albemarle, Asheboro, Sanford, Burlington, Durham, Chapel Hill and Raleigh.
How far is A&R Land Services from Archdale?
We're based in Greensboro, about 25 minutes from Archdale. Randolph County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle pole barn pads near Main Street (US-311 Business) and Creekside Park?
Yes. We work throughout Archdale and the surrounding Randolph County area, including properties around Main Street (US-311 Business), Creekside Park and Hillsville Road. If you're outside the town limits, send the address and we'll confirm it's in range.
What does pole barn pads typically involve on a Archdale property?
Metal shop buildings with concrete slabs is the most common version of it around Archdale. A written scope: strip, cut, fill, compaction, stone base if included, drainage around the pad and any drive work. One price, no changes once we start. Ground conditions and season is the factor that moves the price most on Randolph County jobs, and we'll walk through it with you on site.