Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Site Prep & Excavation · Guilford County · 15 min from Greensboro

Jamestown Pole Barn Pads

A compacted, drained pad built to your building's footprint — ready for the post crew or the slab.

If your building kit is on order and the site in Jamestown isn't ready, we're about 15 minutes away in Greensboro and this is work we do every week. Pads for post-frame barns, metal shops, garages and storage buildings, built to your supplier's footprint.

Many Jamestown buildings go up with a gravel floor first and a slab a year or two later. We build the pad with that in mind — compacted hard, crusher-run base on top — so the concrete contractor has a ready base when the budget allows.

Cleared pad area beside a new storage shed among pine trees with the property owner looking on
Shed site cleared and leveled between the pines
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Jamestown ground conditions and how they shape pole barn pads

Jamestown is hemmed in by Greensboro, High Point and the GTCC campus, so the parcels left are small and awkward — pie-shaped lots behind the golf course, back acreage behind houses on Guilford Road and Penny Road, and wooded strips along the Bicentennial Greenway that owners want opened up without clear-cutting. A lot of what we do is mulching a half acre to an acre so the owner can see their property line, then grading a gravel drive back to a shop or a second structure. Castle McCulloch and the Mendenhall area bring in event-property work too.

Around Wiley Davis Road, Penny Road and Deep River, the properties we're usually called to look like this:

  • Wooded strips along the Deep River and the Bicentennial Greenway that owners want thinned without clear-cutting the buffer
  • Gravel drives back to detached shops and garages on the larger lots toward Vickrey Chapel Road
  • Infill lots between established subdivisions that need clearing and a level pad before a builder will commit

What pole barn pads jobs look like around Jamestown

One job we see over and over near Deep River: Wooded strips along the Deep River and the Bicentennial Greenway that owners want thinned without clear-cutting the buffer. That's textbook pole barn pads work, and it's usually a one-mobilization job for us.

Out toward Dillon Road the pattern changes — more Metal shop buildings with concrete slabs. The approach is the same, the time on site is what moves.

Either way, the first question we ask on a Jamestown site walk is what the ground needs to do afterward, because that decides how far we take it.

Neighbors in High Point, Colfax and Archdale call us for the same work; Jamestown sits right in the middle of that route.

Why Jamestown property owners call A&R

Our Jamestown pad estimates tell you the overbuild, the fill, the stone and the drainage work. If you want to add the driveway or clear more of the lot, it's itemized so you can see the cost.

A&R Land Services builds pads across Guilford County from Greensboro. Reach out about your Jamestown building.

Pole Barn Pads in Jamestown: questions

How much does a pole barn pad cost in North Carolina?

Depends mostly on the slope and whether stone is included. A pad on nearly flat ground with the fill balanced on site is a day of machine work and the low end. A pad on a slope with several feet of fill on the low side, a crusher-run base and a drive to reach it is a bigger job. The building size matters less than the site. We stake it and give a written price after the walk-through.

Can you build a pad on a hillside?

Yes, and most rural lots around the Triad require it. The pad is cut into the uphill side and filled on the downhill side, with the fill compacted in lifts so the low corner doesn't settle under the slab. Very steep sites may need a retaining wall on the cut side; we'll tell you if yours does.

How far is A&R Land Services from Jamestown?

We're based in Greensboro, about 15 minutes from Jamestown. Guilford County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle pole barn pads near Wiley Davis Road and Penny Road?

Yes. We work throughout Jamestown and the surrounding Guilford County area, including properties around Wiley Davis Road, Penny Road and Deep River. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach pole barn pads on Jamestown ground?

RV and boat storage buildings is the most common version of it around Jamestown. Walk-through with you or the building crew, corners and elevation confirmed, pad ready for posts or concrete. Slope of the site and the resulting cut and fill volume is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.

Pole Barn Pads in Jamestown, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate