Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Site Prep & Excavation · Guilford County · Home base from Greensboro

Pole Barn Pads for Greensboro & Guilford County

A compacted, drained pad built to your building's footprint — ready for the post crew or the slab.

A&R Land Services is a veteran and fireman owned crew preparing pole barn and shop pads in Greensboro and throughout Guilford County. Owner on the machine, laser at every corner, and a pad the erectors can lay out on the day they arrive.

Drive access matters on Guilford County shop sites. If the drive comes in uphill of the pad, we cut a swale or set a culvert so runoff doesn't ride the drive straight into the Greensboro building. If it comes in downhill, we grade the approach so trailers can back in without dragging.

Cleared pad area beside a new storage shed among pine trees with the property owner looking on
Shed site cleared and leveled between the pines
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Greensboro ground conditions and how they shape pole barn pads

Red clay here holds water and compacts hard when it's wet, so timing matters. We like to run heavy mulching and grading between late spring and fall when the ground will carry a track machine without rutting, and we schedule the wet-season work for firm, higher ground. Erosion control is a real concern on any slope that drains to the Buffalo Creek watershed — the city's stormwater department does look at disturbed areas near the creeks.

Around Reedy Fork, Piedmont Triad International Airport and the Fisher Park and Irving Park neighborhoods, the properties we're usually called to look like this:

  • New-construction home sites northwest of town along US-220, Lake Brandt Road and Strawberry Road where lots are 1–3 wooded acres
  • Church and school properties with wooded back acreage they want opened up for parking, ball fields or trails
  • Commercial outparcels around Wendover Avenue, Gate City Boulevard and the airport that need brush knocked down and rough grading before a survey or sale

What pole barn pads jobs look like around Greensboro

A typical Greensboro call for pole barn pads looks like this: New-construction home sites northwest of town along US-220, Lake Brandt Road and Strawberry Road where lots are 1–3 wooded acres. We've handled that exact situation around the Fisher Park and Irving Park neighborhoods and Randleman Road more times than we can count.

The other common one is Small commercial storage and contractor shops, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

Neighbors in Pleasant Garden, Jamestown and Oak Ridge call us for the same work; Greensboro sits right in the middle of that route.

Why Greensboro property owners call A&R

We coordinate directly with the building crew in Guilford County. Corners, elevation, access for their trucks — the pad is where they need it when they need it.

Call or text (336) 392-8138 for a free pad estimate in Greensboro. Send the building dimensions and we'll come stake it on the ground.

Pole Barn Pads in Greensboro: questions

How much does a pole barn pad cost in North Carolina?

Depends mostly on the slope and whether stone is included. A pad on nearly flat ground with the fill balanced on site is a day of machine work and the low end. A pad on a slope with several feet of fill on the low side, a crusher-run base and a drive to reach it is a bigger job. The building size matters less than the site. We stake it and give a written price after the walk-through.

Can you build a pad on a hillside?

Yes, and most rural lots around the Triad require it. The pad is cut into the uphill side and filled on the downhill side, with the fill compacted in lifts so the low corner doesn't settle under the slab. Very steep sites may need a retaining wall on the cut side; we'll tell you if yours does.

How far is A&R Land Services from Greensboro?

Greensboro is our home base. We're a Greensboro company, so mobilization in and around the city is as quick as it gets.

Do you handle pole barn pads near Reedy Fork and Piedmont Triad International Airport?

Yes. We work throughout Greensboro and the surrounding Guilford County area, including properties around Reedy Fork, Piedmont Triad International Airport and the Fisher Park and Irving Park neighborhoods. If you're outside the town limits, send the address and we'll confirm it's in range.

What does pole barn pads typically involve on a Greensboro property?

Metal shop buildings with concrete slabs is the most common version of it around Greensboro. We take the building dimensions from your supplier, confirm the location and the finished pad height, stake it with working overbuild, and set a laser benchmark. Ground conditions and season is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.

Pole Barn Pads in Greensboro, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate