If you're building in Greensboro and the lot has been cleared, the pad is the next step. We're right here in our home base away in Greensboro, and we build pads to the builder's finished floor elevation with the fill compacted properly, because loose Guilford County clay is the main reason foundations here move.
Metal building and pole barn pads are a steady part of our Greensboro work. Those slabs are big and thin, which makes them sensitive to settlement, so the pad under them has to be uniformly compacted edge to edge. We build them with the overbuild the slab crew needs and check them with a laser.



Greensboro ground conditions and how they shape building pads
Red clay here holds water and compacts hard when it's wet, so timing matters. We like to run heavy mulching and grading between late spring and fall when the ground will carry a track machine without rutting, and we schedule the wet-season work for firm, higher ground. Erosion control is a real concern on any slope that drains to the Buffalo Creek watershed — the city's stormwater department does look at disturbed areas near the creeks.
Around the Fisher Park and Irving Park neighborhoods, the Greensboro Urban Loop (I-840) and Bryan Boulevard, the properties we're usually called to look like this:
- Church and school properties with wooded back acreage they want opened up for parking, ball fields or trails
- Older horse and hobby farms east toward McLeansville and north toward Browns Summit that have lost fence lines to privet and sweetgum
- Commercial outparcels around Wendover Avenue, Gate City Boulevard and the airport that need brush knocked down and rough grading before a survey or sale
What building pads jobs look like around Greensboro
A typical Greensboro call for building pads looks like this: Church and school properties with wooded back acreage they want opened up for parking, ball fields or trails. We've handled that exact situation around Bryan Boulevard and Reedy Fork more times than we can count.
The other common one is Concrete slabs for equipment sheds, carports and patios, which usually means a tighter work area and more care around what stays.
If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.
Oak Ridge, Mcleansville and Summerfield are in the same loop as Greensboro for us — same crew, same pricing basis.
Why Greensboro property owners call A&R
We'll tell you up front whether your Greensboro pad needs engineered fill and geotech testing. We're not a general contractor or an engineer; we're the dirt crew, and we'd rather set you up right than have you find out later.
A&R Land Services is right here in our home base from Greensboro. Reach out and we'll get your Guilford County pad built before the footings are due.
Building Pads in Greensboro: questions
Do building pads need to be compacted?
Yes, and it's the whole point. Loose clay settles for years, and anything built on it moves with it. We place fill in thin lifts and compact each one with the machine as it goes down. For slabs, steel buildings and anything with an engineered foundation, your builder may require tested density, and we work to the geotech's spec and coordinate their inspections.
Do you need a permit to build a pad?
The pad itself usually falls under your building permit, which the builder or the owner pulls through the county inspections office. If the total disturbed area on the lot goes over an acre, a state sediment and erosion control plan is required too. We'll help you figure out which applies before we start.
How far is A&R Land Services from Greensboro?
Greensboro is our home base. We're a Greensboro company, so mobilization in and around the city is as quick as it gets.
Do you handle building pads near the Fisher Park and Irving Park neighborhoods and the Greensboro Urban Loop (I-840)?
Yes. We work throughout Greensboro and the surrounding Guilford County area, including properties around the Fisher Park and Irving Park neighborhoods, the Greensboro Urban Loop (I-840) and Bryan Boulevard. If you're outside the town limits, send the address and we'll confirm it's in range.
What does building pads typically involve on a Greensboro property?
Sloped lots that need a cut-and-fill pad to hold a level floor is the most common version of it around Greensboro. We review the site plan, stake the footprint with working room around it, set a laser benchmark to the finished floor elevation, and work out cut and fill. Soil moisture and season is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.