The ground in Browns Summit is red clay, and red clay makes a great pad or a terrible one depending on who built it. A&R Land Services is about 18 minutes from Browns Summit, and we build pads the way the material demands: in lifts, at the right moisture, compacted as we go.
The pads we build around Browns Summit are mostly on the sloped parcels left after the flat ground got developed. That means a cut on the high side and a compacted fill on the low side, and the fill is where the care goes. We place it in six-to-eight-inch layers and track in every one before the next goes down.



Browns Summit ground conditions and how they shape building pads
Browns Summit takes its name from the high point on the old railroad grade between Greensboro and Reidsville, and the land drops off from there toward Lake Townsend on one side and Reedy Fork on the other. Nearly all of it is inside the Lake Townsend water supply watershed, which is Greensboro's biggest reservoir. The ridges are Cecil and Appling red clay; the slopes down to the lake and the Reedy Fork bottoms pick up Helena and Chewacla soils that stay damp. Tobacco was the crop here for a century, and the abandoned allotments have grown into loblolly stands with sweetgum, poplar and a dense privet understory.
Around Spearman Road, US-29 and Yanceyville Road, the properties we're usually called to look like this:
- Ridge-top house sites on estate land, with a gravel drive run down from the road
- Lake Townsend watershed parcels where mulching is the only practical way to clear without buffer problems
- Residential lots near Bryan Park and the golf course that want selective clearing and a clean grade
What building pads jobs look like around Browns Summit
If you're near Yanceyville Road or the Northern Guilford High School area, odds are your situation is one we've already worked: ridge-top house sites on estate land, with a gravel drive run down from the road, or additions where the new footprint sits on unprepared ground.
The building pads approach for Guilford County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.
We also cover building pads in Greensboro, Reidsville and Gibsonville, so if you've got property in more than one spot we can often batch the work.
Why Browns Summit property owners call A&R
We build Guilford County pads to the finished floor elevation on the plan, checked with a laser, with corners staked and overbuild for the crew. Builders in Browns Summit get a pad they can trust without re-shooting it.
We'll walk the Browns Summit lot with you or your builder, measure the cut and fill, and give you a written price for the pad.
Building Pads in Browns Summit: questions
How much does it cost to build a house pad in NC?
The cost is mostly in the dirt. A pad on a flat lot where the fill comes from the same site is a day or two of machine time and the low end. A pad on a slope that needs several feet of imported fill compacted in lifts, with geotech testing, is a bigger project and sits well above that. We stake it, measure the cut and fill, and give you a written number before anything moves.
Can you build a pad on a sloped lot?
That's most of what we do. On a slope the pad is cut into the high side and filled on the low side, with the fill compacted in lifts so the downhill edge doesn't settle. Steep lots sometimes need a retaining wall or an engineered fill section; we'll tell you if yours is one of those before we quote it.
How far is A&R Land Services from Browns Summit?
We're based in Greensboro, about 18 minutes from Browns Summit. Guilford County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle building pads near Spearman Road and US-29?
Yes. We work throughout Browns Summit and the surrounding Guilford County area, including properties around Spearman Road, US-29 and Yanceyville Road. If you're outside the town limits, send the address and we'll confirm it's in range.
What should I expect from a building pads job in Guilford County?
Modular and manufactured home pads is the most common version of it around Browns Summit. Top of pad set to elevation with the laser, crowned or sloped so water runs off, and the surrounding ground graded to carry it away from the footing line. Stumps, roots, rock or soft subgrade in the footprint is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.