Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Guilford / Alamance County · 20 min from Greensboro

Building Pads for Gibsonville & Guilford / Alamance County

A level, compacted pad your foundation crew can trust.

A&R Land Services is a veteran and fireman owned crew preparing building pads throughout Gibsonville and Guilford / Alamance County. Homes, metal buildings, garages, slabs. Owner on the machine, laser on the grade, and a pad your foundation contractor won't have to fix.

Stripping is the step that gets skipped most often on Guilford / Alamance County pads. Topsoil, roots and old brush rot under the fill and the pad drops. We take all of it off the footprint on every Gibsonville job and reuse the topsoil elsewhere on the lot.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Gibsonville ground conditions and how they shape building pads

On Iredell ground we'll tell you straight: don't grade it wet. It turns to grease, ruts three feet deep and sets like concrete when it dries. We wait for a solid dry week and we use a track machine. Drainage work is a bigger share of the job here than in most towns — French drains, swales and ditch cleaning to get water off the flat clay and moving toward the creek. Since the town spans two counties, we check which erosion control office has jurisdiction before we start anything over an acre.

Around Eastern Guilford High School, Boone Station Road and NC-61, the properties we're usually called to look like this:

  • Mill-village homes with wooded back lots full of privet and volunteer sweetgum
  • Flat Iredell clay pastures that need ditching and drainage before the owner can run equipment on them
  • One- to two-acre build lots on the Guilford side where subdivisions are pushing out from McLeansville and Whitsett

What building pads jobs look like around Gibsonville

If you're near NC-61 or Lake Mackintosh (south), odds are your situation is one we've already worked: mill-village homes with wooded back lots full of privet and volunteer sweetgum, or concrete slabs for equipment sheds, carports and patios.

The building pads approach for Guilford / Alamance County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

Whitsett, Burlington and Elon are in the same loop as Gibsonville for us — same crew, same pricing basis.

Why Gibsonville property owners call A&R

If the Gibsonville lot also needs clearing, a driveway cut in, or a septic area opened up, we do it in the same mobilization as the pad. One estimate, one crew, one clean handoff to your builder.

Call or text (336) 392-8138 to get a free building pad estimate in Gibsonville. Send the site plan if you have it and we'll come stake it.

Building Pads in Gibsonville: questions

Do building pads need to be compacted?

Yes, and it's the whole point. Loose clay settles for years, and anything built on it moves with it. We place fill in thin lifts and compact each one with the machine as it goes down. For slabs, steel buildings and anything with an engineered foundation, your builder may require tested density, and we work to the geotech's spec and coordinate their inspections.

How high should a building pad be above grade?

High enough that water runs off it in every direction. A few inches above surrounding grade with a slight crown is typical for a crawl space home; a slab pad gets set a specific depth below finished floor so the stone and concrete land at the right height. Your builder's finished floor elevation is the number we grade to.

How far is A&R Land Services from Gibsonville?

We're based in Greensboro, about 20 minutes from Gibsonville. Guilford / Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle building pads near Eastern Guilford High School and Boone Station Road?

Yes. We work throughout Gibsonville and the surrounding Guilford / Alamance County area, including properties around Eastern Guilford High School, Boone Station Road and NC-61. If you're outside the town limits, send the address and we'll confirm it's in range.

What does building pads typically involve on a Gibsonville property?

Sloped lots that need a cut-and-fill pad to hold a level floor is the most common version of it around Gibsonville. Top of pad set to elevation with the laser, crowned or sloped so water runs off, and the surrounding ground graded to carry it away from the footing line. Stumps, roots, rock or soft subgrade in the footprint is the factor that moves the price most on Guilford / Alamance County jobs, and we'll walk through it with you on site.

Building Pads in Gibsonville, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate