Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Guilford / Alamance County · 20 min from Greensboro

Rough Grading for Gibsonville & Guilford / Alamance County

The heavy cut-and-fill that gives a site its shape before anything gets built on it.

Rough grading in Gibsonville is heavy, deliberate work. It's where a sloped, cleared lot becomes a site with a pad, a drive and a drainage plan. We're a veteran and fireman owned crew about 20 minutes away in Greensboro, and this stage of a build is one we handle start to finish.

A lot of rough grading we do near Gibsonville is on lots cleared by somebody else a few years back and then left to sit. Those sites usually have stumps and root mats under the brush that have to come out before the blade can do its job. We bring the root rake and the excavator for that.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Gibsonville ground conditions and how they shape rough grading

On Iredell ground we'll tell you straight: don't grade it wet. It turns to grease, ruts three feet deep and sets like concrete when it dries. We wait for a solid dry week and we use a track machine. Drainage work is a bigger share of the job here than in most towns — French drains, swales and ditch cleaning to get water off the flat clay and moving toward the creek. Since the town spans two counties, we check which erosion control office has jurisdiction before we start anything over an acre.

Around Burlington Road (US-70), Haw River and NC-61, the properties we're usually called to look like this:

  • One- to two-acre build lots on the Guilford side where subdivisions are pushing out from McLeansville and Whitsett
  • Flat Iredell clay pastures that need ditching and drainage before the owner can run equipment on them
  • Mill-village homes with wooded back lots full of privet and volunteer sweetgum

What rough grading jobs look like around Gibsonville

Most of our rough grading work in Gibsonville comes from two directions. First, one- to two-acre build lots on the Guilford side where subdivisions are pushing out from McLeansville and Whitsett. Second, driveway and farm road beds being roughed through a property.

Both show up regularly along NC-61 and Boone Station Road, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.

Whitsett, Burlington and Elon are in the same loop as Gibsonville for us — same crew, same pricing basis.

Why Gibsonville property owners call A&R

Our rough grading estimates in Gibsonville describe the cut, the fill, the compaction approach and whether any material is trucked. You know what you're paying for before the trailer unloads.

A&R Land Services is about 20 minutes from Gibsonville. Contact us for cut and fill, pad shaping and earth work anywhere in Guilford / Alamance County.

Rough Grading in Gibsonville: questions

What's the difference between rough grading and final grading?

Rough grading moves the volume and gets the site within a few inches of its planned shape — cuts, fills, drainage pattern, pad location. Final grading is the last step after construction: smoothing, setting the exact slope, spreading topsoil and leaving it ready for seed or sod. Most new builds need rough grading before the foundation and final grading after the framers and trades are gone.

Do I need a grading permit in North Carolina?

Disturbing more than an acre requires an approved sediment and erosion control plan under state rules, administered by the county or the state depending on where you are. Under an acre, most counties don't require a grading permit, though cities like Greensboro and Winston-Salem have stormwater and buffer rules that can apply. We'll point you to the right office if your lot is near the line.

How far is A&R Land Services from Gibsonville?

We're based in Greensboro, about 20 minutes from Gibsonville. Guilford / Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle rough grading near Burlington Road (US-70) and Haw River?

Yes. We work throughout Gibsonville and the surrounding Guilford / Alamance County area, including properties around Burlington Road (US-70), Haw River and NC-61. If you're outside the town limits, send the address and we'll confirm it's in range.

What does rough grading typically involve on a Gibsonville property?

Sloped yards being terraced or opened up for use is the most common version of it around Gibsonville. Topsoil stripped and stockpiled for later. Cuts made from the high side with the dozer blade and excavator, working the clay when it's at the right moisture to place and compact. Cubic yards of cut and fill — the single biggest factor is the factor that moves the price most on Guilford / Alamance County jobs, and we'll walk through it with you on site.

Rough Grading in Gibsonville, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate