Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Alamance County · 30 min from Greensboro

Rough Grading for Graham & Alamance County

The heavy cut-and-fill that gives a site its shape before anything gets built on it.

Before anything gets built in Graham, the dirt has to be shaped to carry it. A&R Land Services rough grades home sites, shop locations and driveways across Alamance County — cutting the high ground, filling the low, compacting the clay in lifts and leaving the site ready for the foundation crew.

Alamance County clay is good fill when it's handled right. It compacts dense and holds a slope. It's terrible fill when it's placed wet or dumped in a single lift. We work it at the right moisture, in layers, tracked in each pass, and that discipline is the difference between a pad that holds and one that cracks a slab.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Graham ground conditions and how they shape rough grading

The Iredell and Enon clays are the challenge — they rut, they slick, and they shrink and crack in a dry spell. We grade them only after a dry stretch and use track machines. The Graham-Mebane Lake watershed overlay limits impervious cover and puts buffers on Back Creek and its branches. Alamance County erosion control handles disturbance past an acre. Drainage is part of nearly every job here: swales, ditch cleaning and French drains to get standing water off the flat clay and moving.

Around Graham-Hopedale Road, NC-49 and Alamance Community College, the properties we're usually called to look like this:

  • Subdivision lots and small commercial sites along the I-40/I-85 and Graham-Hopedale corridor
  • Fence-row and hedgerow clearing on old farms where the wire has disappeared into honeysuckle
  • Flat Iredell clay fields that need ditching and swales before they'll carry hay equipment

What rough grading jobs look like around Graham

Most of our rough grading work in Graham comes from two directions. First, subdivision lots and small commercial sites along the I-40/I-85 and Graham-Hopedale corridor. Second, driveway and farm road beds being roughed through a property.

Both show up regularly along Alamance Community College and I-40 / I-85, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.

If you're just outside Graham — Snow Camp, Saxapahaw, Mebane or anywhere between — you're still inside our regular range.

Why Graham property owners call A&R

We're about 30 minutes from Graham, which is close enough to keep mobilization cheap and come back quickly if the builder needs a tweak after the footings are poured.

Rough grading in Graham starts with a conversation about where the house goes and where the water should go. Call (336) 392-8138 and let's have it.

Rough Grading in Graham: questions

What's the difference between rough grading and final grading?

Rough grading moves the volume and gets the site within a few inches of its planned shape — cuts, fills, drainage pattern, pad location. Final grading is the last step after construction: smoothing, setting the exact slope, spreading topsoil and leaving it ready for seed or sod. Most new builds need rough grading before the foundation and final grading after the framers and trades are gone.

Do I need a grading permit in North Carolina?

Disturbing more than an acre requires an approved sediment and erosion control plan under state rules, administered by the county or the state depending on where you are. Under an acre, most counties don't require a grading permit, though cities like Greensboro and Winston-Salem have stormwater and buffer rules that can apply. We'll point you to the right office if your lot is near the line.

How far is A&R Land Services from Graham?

We're based in Greensboro, about 30 minutes from Graham. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle rough grading near Graham-Hopedale Road and NC-49?

Yes. We work throughout Graham and the surrounding Alamance County area, including properties around Graham-Hopedale Road, NC-49 and Alamance Community College. If you're outside the town limits, send the address and we'll confirm it's in range.

What does rough grading typically involve on a Graham property?

Sloped yards being terraced or opened up for use is the most common version of it around Graham. Topsoil stripped and stockpiled for later. Cuts made from the high side with the dozer blade and excavator, working the clay when it's at the right moisture to place and compact. Whether the dirt balances on site or has to be trucked in or out is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.

Rough Grading in Graham, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate