Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Alamance County · 38 min from Greensboro

Rough Grading in Saxapahaw, NC

The heavy cut-and-fill that gives a site its shape before anything gets built on it.

If you've got plans from a builder and a cleared lot in Saxapahaw, the next call is to us. We stake it, set a laser benchmark, and move the dirt to the elevations on the drawing. Alamance County red clay is the material, and we know how to place it so it doesn't settle under the house.

Newer construction around Saxapahaw often sits on the sloped ground left after the flatter parcels were built out. That means deeper cuts and taller fills than a decade ago. It's still a one-crew job with the right equipment and a laser, and we've done plenty of it in Alamance County.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Saxapahaw ground conditions and how they shape rough grading

Saxapahaw is a mill village on a bluff above the Haw River, and the land drops hard from the ridge to the water. The ridges are Cecil and Georgeville clay — this is where Alamance's heavy diabase soils start giving way to the slate belt — and the slopes to the river are steep, rocky and wooded. The Haw itself is wide and rocky here, with Cane Creek joining from the west and the Jordan Lake backwater not far downstream. Riverbank growth is privet, kudzu, honeysuckle and wisteria over sycamore and river birch, and the old fields on the ridge have gone to loblolly and sweetgum.

Around the Haw River Trail, NC-87 and Lindley Mill, the properties we're usually called to look like this:

  • Cattle and hay farms along NC-87 reclaiming pasture and fence rows
  • Steep riverbank parcels inside the Jordan Lake watershed buffers needing selective, mulch-in-place clearing
  • Old mill-village lots with wisteria and kudzu over the outbuildings

What rough grading jobs look like around Saxapahaw

One job we see over and over near Lindley Mill: Cattle and hay farms along NC-87 reclaiming pasture and fence rows. That's textbook rough grading work, and it's usually a one-mobilization job for us.

Out toward Church Road the pattern changes — more New home sites after clearing, before footings go in. The approach is the same, the time on site is what moves.

Either way, the first question we ask on a Saxapahaw site walk is what the ground needs to do afterward, because that decides how far we take it.

If you're just outside Saxapahaw — Snow Camp, Pittsboro, Haw River or anywhere between — you're still inside our regular range.

Why Saxapahaw property owners call A&R

If your Saxapahaw site also needs clearing, stump removal, a driveway cut or a drainage swale, we do that in the same mobilization. One contractor from the woods to the pad.

Call or text (336) 392-8138 to set up a free rough grading estimate in Saxapahaw. Bring the plans if you have them — we'll stake it and put a number on it.

Rough Grading in Saxapahaw: questions

How far out from Greensboro do you travel for grading?

About an hour and twenty minutes in any direction — the full Triad, up to Virginia, out to Mount Airy and Elkin, down to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh. Bigger rough grading jobs make the longer drives worthwhile.

Do I need a grading permit in North Carolina?

Disturbing more than an acre requires an approved sediment and erosion control plan under state rules, administered by the county or the state depending on where you are. Under an acre, most counties don't require a grading permit, though cities like Greensboro and Winston-Salem have stormwater and buffer rules that can apply. We'll point you to the right office if your lot is near the line.

How far is A&R Land Services from Saxapahaw?

We're based in Greensboro, about 38 minutes from Saxapahaw. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle rough grading near the Haw River Trail and NC-87?

Yes. We work throughout Saxapahaw and the surrounding Alamance County area, including properties around the Haw River Trail, NC-87 and Lindley Mill. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a rough grading job in Alamance County?

Driveway and farm road beds being roughed through a property is the most common version of it around Saxapahaw. Swales, crowns and positive fall shaped in. We leave the site a few inches high for final grading and walk it with you or your builder. Depth of cuts and whether rock or roots are in the way is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.

Rough Grading in Saxapahaw, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate