Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Alamance County · 38 min from Greensboro

Building Pads for Saxapahaw & Alamance County

A level, compacted pad your foundation crew can trust.

If you're building in Saxapahaw and the lot has been cleared, the pad is the next step. We're about 38 minutes away in Greensboro, and we build pads to the builder's finished floor elevation with the fill compacted properly, because loose Alamance County clay is the main reason foundations here move.

Metal building and pole barn pads are a steady part of our Saxapahaw work. Those slabs are big and thin, which makes them sensitive to settlement, so the pad under them has to be uniformly compacted edge to edge. We build them with the overbuild the slab crew needs and check them with a laser.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Saxapahaw ground conditions and how they shape building pads

Everything on the river side is inside the Jordan Lake watershed, which carries some of the stricter buffer rules in the state, and the river is also part of the state's Haw River paddle trail — so anything near the water is handled carefully and we keep mulch on every slope. Steep lots mean we never scrape; we mulch in place and seed. Alamance County erosion control permits apply past an acre. The bluff ground drains fast and carries equipment most of the year; the river terraces stay soft until early summer.

Around Haw River, Cane Creek and Lindley Mill, the properties we're usually called to look like this:

  • Cattle and hay farms along NC-87 reclaiming pasture and fence rows
  • Steep riverbank parcels inside the Jordan Lake watershed buffers needing selective, mulch-in-place clearing
  • Wooded three- to fifteen-acre lots near the village where owners want a house site, a river view and a trail down the bluff

What building pads jobs look like around Saxapahaw

If you're near Lindley Mill or Saxapahaw Lake and dam, odds are your situation is one we've already worked: cattle and hay farms along NC-87 reclaiming pasture and fence rows, or concrete slabs for equipment sheds, carports and patios.

The building pads approach for Alamance County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

If you're just outside Saxapahaw — Snow Camp, Haw River, Pittsboro or anywhere between — you're still inside our regular range.

Why Saxapahaw property owners call A&R

We'll tell you up front whether your Saxapahaw pad needs engineered fill and geotech testing. We're not a general contractor or an engineer; we're the dirt crew, and we'd rather set you up right than have you find out later.

A&R Land Services is about 38 minutes from Saxapahaw. Reach out and we'll get your Alamance County pad built before the footings are due.

Building Pads in Saxapahaw: questions

Do building pads need to be compacted?

Yes, and it's the whole point. Loose clay settles for years, and anything built on it moves with it. We place fill in thin lifts and compact each one with the machine as it goes down. For slabs, steel buildings and anything with an engineered foundation, your builder may require tested density, and we work to the geotech's spec and coordinate their inspections.

Can you build a pad on a sloped lot?

That's most of what we do. On a slope the pad is cut into the high side and filled on the low side, with the fill compacted in lifts so the downhill edge doesn't settle. Steep lots sometimes need a retaining wall or an engineered fill section; we'll tell you if yours is one of those before we quote it.

How far is A&R Land Services from Saxapahaw?

We're based in Greensboro, about 38 minutes from Saxapahaw. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle building pads near Haw River and Cane Creek?

Yes. We work throughout Saxapahaw and the surrounding Alamance County area, including properties around Haw River, Cane Creek and Lindley Mill. If you're outside the town limits, send the address and we'll confirm it's in range.

What does building pads typically involve on a Saxapahaw property?

Sloped lots that need a cut-and-fill pad to hold a level floor is the most common version of it around Saxapahaw. Top of pad set to elevation with the laser, crowned or sloped so water runs off, and the surrounding ground graded to carry it away from the footing line. Depth of cut and height of fill — sloped lots cost more than flat ones is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.

Building Pads in Saxapahaw, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate