Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Alamance County · 38 min from Greensboro

Building Pads in Mebane, NC

A level, compacted pad your foundation crew can trust.

If you're building in Mebane and the lot has been cleared, the pad is the next step. We're about 38 minutes away in Greensboro, and we build pads to the builder's finished floor elevation with the fill compacted properly, because loose Alamance County clay is the main reason foundations here move.

Metal building and pole barn pads are a steady part of our Mebane work. Those slabs are big and thin, which makes them sensitive to settlement, so the pad under them has to be uniformly compacted edge to edge. We build them with the overbuild the slab crew needs and check them with a laser.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Mebane ground conditions and how they shape building pads

Mebane sits on the Alamance–Orange county line along I-40/I-85, and the land is a mix of Cecil and Appling on the ridges with Enon and Iredell on the broad flats to the south and west. Back Creek, Mill Creek and the Eno River headwaters drain the area — the Eno side is Orange County and runs to the Neuse, while the Back Creek side runs to the Haw. Mebane grew up as a furniture town on fairly level ground, and the flat parts stay wet in winter. Fallow land goes to loblolly and sweetgum with red cedar and a privet understory, and the newer subdivisions are ringed with escaped Bradford pear.

Around NC-119, Mebane Oaks Road and Lake Michael Park, the properties we're usually called to look like this:

  • Farm tracts toward Hawfields, Efland and Snow Camp reclaiming pasture and cutting fence lines
  • Hunting land on the Orange County side needing lanes and trails
  • Subdivision lots off Mebane Oaks Road, Fifth Street and NC-119 with pine and privet to clear and pads to level

What building pads jobs look like around Mebane

A typical Mebane call for building pads looks like this: Farm tracts toward Hawfields, Efland and Snow Camp reclaiming pasture and cutting fence lines. We've handled that exact situation around Lake Michael Park and Mebane Community Park more times than we can count.

The other common one is New home sites on crawl space, slab or basement foundations, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

If you're just outside Mebane — Haw River, Burlington, Efland or anywhere between — you're still inside our regular range.

Why Mebane property owners call A&R

We'll tell you up front whether your Mebane pad needs engineered fill and geotech testing. We're not a general contractor or an engineer; we're the dirt crew, and we'd rather set you up right than have you find out later.

A&R Land Services is about 38 minutes from Mebane. Reach out and we'll get your Alamance County pad built before the footings are due.

Building Pads in Mebane: questions

Do building pads need to be compacted?

Yes, and it's the whole point. Loose clay settles for years, and anything built on it moves with it. We place fill in thin lifts and compact each one with the machine as it goes down. For slabs, steel buildings and anything with an engineered foundation, your builder may require tested density, and we work to the geotech's spec and coordinate their inspections.

How much does it cost to build a house pad in NC?

The cost is mostly in the dirt. A pad on a flat lot where the fill comes from the same site is a day or two of machine time and the low end. A pad on a slope that needs several feet of imported fill compacted in lifts, with geotech testing, is a bigger project and sits well above that. We stake it, measure the cut and fill, and give you a written number before anything moves.

How far is A&R Land Services from Mebane?

We're based in Greensboro, about 38 minutes from Mebane. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle building pads near NC-119 and Mebane Oaks Road?

Yes. We work throughout Mebane and the surrounding Alamance County area, including properties around NC-119, Mebane Oaks Road and Lake Michael Park. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a building pads job in Alamance County?

Concrete slabs for equipment sheds, carports and patios is the most common version of it around Mebane. We review the site plan, stake the footprint with working room around it, set a laser benchmark to the finished floor elevation, and work out cut and fill. Depth of cut and height of fill — sloped lots cost more than flat ones is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.

Building Pads in Mebane, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate