Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Site Prep & Excavation · Alamance County · 38 min from Greensboro

Mebane Pole Barn Pads

A compacted, drained pad built to your building's footprint — ready for the post crew or the slab.

Shop and barn pads are some of our favorite work in Mebane because the result is simple: a level, dry, solid piece of ground where there was a slope. A&R Land Services is about 38 minutes from Mebane and ready to build yours.

The acreage around Mebane where pole barns go up is mostly rolling pasture and woods edge, and the pad usually ends up partly in cut and partly in fill. The Alamance County clay from the cut makes excellent fill when it's placed in thin lifts and compacted, and that's how we build it.

Cleared pad area beside a new storage shed among pine trees with the property owner looking on
Shed site cleared and leveled between the pines
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Mebane ground conditions and how they shape pole barn pads

Mebane has been one of the fastest-growing towns in the Triad, and much of our work is tied to that: subdivision lot clearing off Mebane Oaks Road, Fifth Street and the NC-119 corridor, and commercial and industrial site prep along the interstate near the Tanger Outlets and the Mebane industrial parks. Beyond the growth ring there are still big farm tracts toward Snow Camp, Efland and Hawfields where owners want pasture reclaimed, fence lines cut and hunting land opened up.

Around Mill Creek, Tanger Outlets and I-40 / I-85, the properties we're usually called to look like this:

  • Commercial and industrial sites along the interstate and the Mebane industrial parks needing clearing and rough grading
  • Flat Iredell clay yards behind newer homes with standing water that need French drains and swales
  • Hunting land on the Orange County side needing lanes and trails

What pole barn pads jobs look like around Mebane

If you're near I-40 / I-85 or the Hawfields community, odds are your situation is one we've already worked: commercial and industrial sites along the interstate and the Mebane industrial parks needing clearing and rough grading, or metal shop buildings with concrete slabs.

The pole barn pads approach for Alamance County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

We also cover pole barn pads in Graham, Haw River and Snow Camp, so if you've got property in more than one spot we can often batch the work.

Why Mebane property owners call A&R

We build Alamance County pads in compacted lifts, not one big push. A pole barn slab is big and thin and finds every soft spot; a properly built pad means it doesn't find any.

Send us the footprint and the address in Mebane. We'll walk the site, look at the slope and drainage, and give you a written price.

Pole Barn Pads in Mebane: questions

How much does a pole barn pad cost in North Carolina?

Depends mostly on the slope and whether stone is included. A pad on nearly flat ground with the fill balanced on site is a day of machine work and the low end. A pad on a slope with several feet of fill on the low side, a crusher-run base and a drive to reach it is a bigger job. The building size matters less than the site. We stake it and give a written price after the walk-through.

Should the pad be built before or after the posts are set?

Before. The post crew needs a level, compacted pad to lay out on and auger into. If the building gets a slab, that's poured after the posts and walls are up, and we can come back to set the stone base at that stage. Build the pad first either way.

How far is A&R Land Services from Mebane?

We're based in Greensboro, about 38 minutes from Mebane. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle pole barn pads near Mill Creek and Tanger Outlets?

Yes. We work throughout Mebane and the surrounding Alamance County area, including properties around Mill Creek, Tanger Outlets and I-40 / I-85. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach pole barn pads on Mebane ground?

RV and boat storage buildings is the most common version of it around Mebane. Crusher-run base spread and compacted where the floor is gravel or a slab is coming. Surrounding ground graded to carry roof and drive runoff away from the building. Drainage work and driveway access to the pad is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.

Pole Barn Pads in Mebane, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate