Shop and barn pads are some of our favorite work in Hillsborough because the result is simple: a level, dry, solid piece of ground where there was a slope. A&R Land Services is about 50 minutes from Hillsborough and ready to build yours.
The acreage around Hillsborough where pole barns go up is mostly rolling pasture and woods edge, and the pad usually ends up partly in cut and partly in fill. The Orange County clay from the cut makes excellent fill when it's placed in thin lifts and compacted, and that's how we build it.



Hillsborough ground conditions and how they shape pole barn pads
A good share of our Hillsborough work comes from the ten- to forty-acre tracts along Dimmocks Mill Road, Old NC-10 and St. Marys Road where Durham and Chapel Hill commuters are buying farmland and wanting a house site, a pasture and a view back out of it. South of I-85 the ground gets rockier as you head toward Efland and the Triassic edge. We also pick up right-of-way and utility access work near the Orange County line and overgrown mill-village lots around West Hillsborough.
Around Occoneechee Mountain, Seven Mile Creek and Old NC-10, the properties we're usually called to look like this:
- Wooded one- to three-acre building lots in the newer subdivisions off NC-86 north and Old NC-10
- Older horse properties around Schley and Cedar Grove where privet and honeysuckle have taken the fence rows
- Ten- to forty-acre former farms along St. Marys Road and Orange Grove Road being converted to a single home site plus pasture
What pole barn pads jobs look like around Hillsborough
One job we see over and over near Old NC-10: Wooded one- to three-acre building lots in the newer subdivisions off NC-86 north and Old NC-10. That's textbook pole barn pads work, and it's usually a one-mobilization job for us.
Out toward West Hillsborough the pattern changes — more Metal shop buildings with concrete slabs. The approach is the same, the time on site is what moves.
Either way, the first question we ask on a Hillsborough site walk is what the ground needs to do afterward, because that decides how far we take it.
Neighbors in Chapel Hill, Mebane and Durham call us for the same work; Hillsborough sits right in the middle of that route.
Why Hillsborough property owners call A&R
We build Orange County pads in compacted lifts, not one big push. A pole barn slab is big and thin and finds every soft spot; a properly built pad means it doesn't find any.
Send us the footprint and the address in Hillsborough. We'll walk the site, look at the slope and drainage, and give you a written price.
Pole Barn Pads in Hillsborough: questions
How much does a pole barn pad cost in North Carolina?
Depends mostly on the slope and whether stone is included. A pad on nearly flat ground with the fill balanced on site is a day of machine work and the low end. A pad on a slope with several feet of fill on the low side, a crusher-run base and a drive to reach it is a bigger job. The building size matters less than the site. We stake it and give a written price after the walk-through.
Should the pad be built before or after the posts are set?
Before. The post crew needs a level, compacted pad to lay out on and auger into. If the building gets a slab, that's poured after the posts and walls are up, and we can come back to set the stone base at that stage. Build the pad first either way.
How far is A&R Land Services from Hillsborough?
We're based in Greensboro, about 50 minutes from Hillsborough. Orange County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle pole barn pads near Occoneechee Mountain and Seven Mile Creek?
Yes. We work throughout Hillsborough and the surrounding Orange County area, including properties around Occoneechee Mountain, Seven Mile Creek and Old NC-10. If you're outside the town limits, send the address and we'll confirm it's in range.
How do you approach pole barn pads on Hillsborough ground?
RV and boat storage buildings is the most common version of it around Hillsborough. Walk-through with you or the building crew, corners and elevation confirmed, pad ready for posts or concrete. Slope of the site and the resulting cut and fill volume is the factor that moves the price most on Orange County jobs, and we'll walk through it with you on site.