The ground in Graham is red clay, and red clay makes a great pad or a terrible one depending on who built it. A&R Land Services is about 30 minutes from Graham, and we build pads the way the material demands: in lifts, at the right moisture, compacted as we go.
The pads we build around Graham are mostly on the sloped parcels left after the flat ground got developed. That means a cut on the high side and a compacted fill on the low side, and the fill is where the care goes. We place it in six-to-eight-inch layers and track in every one before the next goes down.



Graham ground conditions and how they shape building pads
The Iredell and Enon clays are the challenge — they rut, they slick, and they shrink and crack in a dry spell. We grade them only after a dry stretch and use track machines. The Graham-Mebane Lake watershed overlay limits impervious cover and puts buffers on Back Creek and its branches. Alamance County erosion control handles disturbance past an acre. Drainage is part of nearly every job here: swales, ditch cleaning and French drains to get standing water off the flat clay and moving.
Around Court Square, Haw River and Graham-Mebane Lake, the properties we're usually called to look like this:
- Subdivision lots and small commercial sites along the I-40/I-85 and Graham-Hopedale corridor
- Fence-row and hedgerow clearing on old farms where the wire has disappeared into honeysuckle
- Twenty- to eighty-acre cattle and hay farms off NC-87, NC-49 and Swepsonville Road reclaiming pasture from cedar and privet
What building pads jobs look like around Graham
If you're near Graham-Mebane Lake or NC-87, odds are your situation is one we've already worked: subdivision lots and small commercial sites along the I-40/I-85 and Graham-Hopedale corridor, or concrete slabs for equipment sheds, carports and patios.
The building pads approach for Alamance County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.
If you're just outside Graham — Burlington, Gibsonville, Snow Camp or anywhere between — you're still inside our regular range.
Why Graham property owners call A&R
We build Alamance County pads to the finished floor elevation on the plan, checked with a laser, with corners staked and overbuild for the crew. Builders in Graham get a pad they can trust without re-shooting it.
We'll walk the Graham lot with you or your builder, measure the cut and fill, and give you a written price for the pad.
Building Pads in Graham: questions
How far from Greensboro will you build a pad?
About an hour and twenty minutes in any direction. That covers the Triad plus north to the Virginia line, west to Mount Airy and Elkin, south to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh.
How much does it cost to build a house pad in NC?
The cost is mostly in the dirt. A pad on a flat lot where the fill comes from the same site is a day or two of machine time and the low end. A pad on a slope that needs several feet of imported fill compacted in lifts, with geotech testing, is a bigger project and sits well above that. We stake it, measure the cut and fill, and give you a written number before anything moves.
How far is A&R Land Services from Graham?
We're based in Greensboro, about 30 minutes from Graham. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle building pads near Court Square and Haw River?
Yes. We work throughout Graham and the surrounding Alamance County area, including properties around Court Square, Haw River and Graham-Mebane Lake. If you're outside the town limits, send the address and we'll confirm it's in range.
What does building pads typically involve on a Graham property?
Sloped lots that need a cut-and-fill pad to hold a level floor is the most common version of it around Graham. Top of pad set to elevation with the laser, crowned or sloped so water runs off, and the surrounding ground graded to carry it away from the footing line. Soil moisture and season is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.