Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Guilford County · 18 min from Greensboro

Whitsett Building Pads

A level, compacted pad your foundation crew can trust.

If you're building in Whitsett and the lot has been cleared, the pad is the next step. We're about 18 minutes away in Greensboro, and we build pads to the builder's finished floor elevation with the fill compacted properly, because loose Guilford County clay is the main reason foundations here move.

Metal building and pole barn pads are a steady part of our Whitsett work. Those slabs are big and thin, which makes them sensitive to settlement, so the pad under them has to be uniformly compacted edge to edge. We build them with the overbuild the slab crew needs and check them with a laser.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Whitsett ground conditions and how they shape building pads

Commercial work drives a lot of our Whitsett calls: outparcels near the Rock Creek Center and the distribution corridor along Rock Creek Dairy Road that need brush knocked down, stumps pulled and a rough grade cut so a buyer can walk it. Around that, there's still plenty of rural residential ground along NC-61, Mt. Hope Church Road and the back roads toward Sedalia — five- to twenty-acre pieces where people are putting up a house, a pole barn and a gravel drive, and want the pine thicket mulched into something that looks like a yard.

Around Whitsett Park, Rock Creek and NC-61, the properties we're usually called to look like this:

  • Flat Iredell clay fields needing swales and ditching so they'll carry equipment
  • Creek-side parcels along Rock Creek and Big Alamance Creek where buffers limit what can be scraped
  • Five- to twenty-acre rural home sites off NC-61 and Mt. Hope Church Road with a house, pole barn and gravel drive going in

What building pads jobs look like around Whitsett

One job we see over and over near NC-61: Flat Iredell clay fields needing swales and ditching so they'll carry equipment. That's textbook building pads work, and it's usually a one-mobilization job for us.

Out toward Big Alamance Creek the pattern changes — more Sloped lots that need a cut-and-fill pad to hold a level floor. The approach is the same, the time on site is what moves.

Either way, the first question we ask on a Whitsett site walk is what the ground needs to do afterward, because that decides how far we take it.

If you're just outside Whitsett — Gibsonville, Julian, Greensboro or anywhere between — you're still inside our regular range.

Why Whitsett property owners call A&R

We'll tell you up front whether your Whitsett pad needs engineered fill and geotech testing. We're not a general contractor or an engineer; we're the dirt crew, and we'd rather set you up right than have you find out later.

A&R Land Services is about 18 minutes from Whitsett. Reach out and we'll get your Guilford County pad built before the footings are due.

Building Pads in Whitsett: questions

Do you need a permit to build a pad?

The pad itself usually falls under your building permit, which the builder or the owner pulls through the county inspections office. If the total disturbed area on the lot goes over an acre, a state sediment and erosion control plan is required too. We'll help you figure out which applies before we start.

How much does it cost to build a house pad in NC?

The cost is mostly in the dirt. A pad on a flat lot where the fill comes from the same site is a day or two of machine time and the low end. A pad on a slope that needs several feet of imported fill compacted in lifts, with geotech testing, is a bigger project and sits well above that. We stake it, measure the cut and fill, and give you a written number before anything moves.

How far is A&R Land Services from Whitsett?

We're based in Greensboro, about 18 minutes from Whitsett. Guilford County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle building pads near Whitsett Park and Rock Creek?

Yes. We work throughout Whitsett and the surrounding Guilford County area, including properties around Whitsett Park, Rock Creek and NC-61. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach building pads on Whitsett ground?

New home sites on crawl space, slab or basement foundations is the most common version of it around Whitsett. We walk it with your builder or foundation crew, confirm the corners and elevation, and leave it ready for footings or slab prep. Soil moisture and season is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.

Building Pads in Whitsett, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate