Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Guilford County · 15 min from Greensboro

Building Pads in McLeansville, NC

A level, compacted pad your foundation crew can trust.

Every house, shop and barn in McLeansville sits on a pad, and the pad decides whether the slab cracks. A&R Land Services builds compacted, laser-leveled pads across Guilford County — stripped to clay, filled in lifts, shaped to drain, and ready for the foundation crew.

A lot of Guilford County builders have been burned by a pad somebody scraped level and called done. On clay that pad holds water in the footing trench the first wet week. Ours get a crown and the surrounding ground graded away, so the foundation crew in McLeansville is working on dry ground.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

McLeansville ground conditions and how they shape building pads

East of Greensboro along US-70 and I-85, McLeansville is a wide stretch of rolling farm ground that's turning into subdivisions one field at a time. The high ground is Cecil clay, but pockets of Enon and Iredell show up around Mt. Hope Church Road and toward Gibsonville, and those spots are wet, slick and slow. Buffalo Creek and Reedy Fork both pass near here on their way to the Haw River, and the bottoms along them are Chewacla silt that floods in a hard rain. Fields that stopped being farmed grow up in loblolly first, then sweetgum and red cedar, with privet and honeysuckle underneath.

Around US-70, Huffine Mill Road and NC-61, the properties we're usually called to look like this:

  • Storm-damaged tracts where downed loblolly needs cleanup and the brush mulched
  • Shop and pole barn pads with gravel access lanes behind existing homes
  • Three- to ten-acre homesteads off Huffine Mill, Youngs Mill and Frieden Church Road with overgrown back acreage and lost fence lines

What building pads jobs look like around McLeansville

If you're near NC-61 or Frieden Church Road, odds are your situation is one we've already worked: storm-damaged tracts where downed loblolly needs cleanup and the brush mulched, or additions where the new footprint sits on unprepared ground.

The building pads approach for Guilford County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

Neighbors in Greensboro, Whitsett and Gibsonville call us for the same work; McLeansville sits right in the middle of that route.

Why McLeansville property owners call A&R

Being about 15 minutes from McLeansville means we're available for the quick follow-up a foundation crew sometimes needs — a corner trimmed, a trench spoil moved — without a big mobilization charge.

Pad prep in McLeansville done right means your foundation crew starts on time. Call (336) 392-8138 and let's get it scheduled.

Building Pads in McLeansville: questions

How much does it cost to build a house pad in NC?

The cost is mostly in the dirt. A pad on a flat lot where the fill comes from the same site is a day or two of machine time and the low end. A pad on a slope that needs several feet of imported fill compacted in lifts, with geotech testing, is a bigger project and sits well above that. We stake it, measure the cut and fill, and give you a written number before anything moves.

Do building pads need to be compacted?

Yes, and it's the whole point. Loose clay settles for years, and anything built on it moves with it. We place fill in thin lifts and compact each one with the machine as it goes down. For slabs, steel buildings and anything with an engineered foundation, your builder may require tested density, and we work to the geotech's spec and coordinate their inspections.

How far is A&R Land Services from McLeansville?

We're based in Greensboro, about 15 minutes from McLeansville. Guilford County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle building pads near US-70 and Huffine Mill Road?

Yes. We work throughout McLeansville and the surrounding Guilford County area, including properties around US-70, Huffine Mill Road and NC-61. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a building pads job in Guilford County?

Modular and manufactured home pads is the most common version of it around McLeansville. Top of pad set to elevation with the laser, crowned or sloped so water runs off, and the surrounding ground graded to carry it away from the footing line. Pad size and how much overbuild the foundation crew needs is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.

Building Pads in McLeansville, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate