Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Driveways & Roads · Guilford County · Home base from Greensboro

Greensboro Gravel Driveways

Cut to grade, crowned, ditched and built on ABC stone — a driveway that's still a driveway in five years.

A&R Land Services installs gravel driveways in Greensboro — from the NCDOT permit question at the road to the last pass of the blade at the garage. We're only right here in our home base from Greensboro, which matters on a job that moves this much stone.

A lot of Greensboro lots are wooded right to the road, so the driveway starts with clearing. We mulch the route, pull the stumps, and the chips go to the sides as erosion control while the roadbed is cut. It's one mobilization from Greensboro instead of a clearing contractor and then a driveway contractor.

Gravel driveway shoulders cleared through woods leading to a garage
Driveway cleared to the garage
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Greensboro ground conditions and how they shape gravel driveways

The big growth corridors are northwest toward Summerfield and Oak Ridge along US-220 and Battleground Avenue, east around McLeansville and the Piedmont Triad Farm, and south along US-421 toward the airport-adjacent industrial parks. Most of our Greensboro calls are two- to ten-acre infill parcels inside the loop (I-840/I-73) that were skipped over during earlier development because they were wooded or wet, plus larger tracts out past Lake Brandt and Lake Townsend where people are building on former tobacco farms.

Around Piedmont Triad International Airport, Lake Townsend and Bryan Boulevard, the properties we're usually called to look like this:

  • Overgrown infill lots inside the I-840 loop that developers passed over because they were wooded or near a creek buffer
  • Church and school properties with wooded back acreage they want opened up for parking, ball fields or trails
  • Older horse and hobby farms east toward McLeansville and north toward Browns Summit that have lost fence lines to privet and sweetgum

What gravel driveways jobs look like around Greensboro

One job we see over and over near Bryan Boulevard: Overgrown infill lots inside the I-840 loop that developers passed over because they were wooded or near a creek buffer. That's textbook gravel driveways work, and it's usually a one-mobilization job for us.

Out toward the Fisher Park and Irving Park neighborhoods the pattern changes — more New homes, shops and barns on rural lots. The approach is the same, the time on site is what moves.

Either way, the first question we ask on a Greensboro site walk is what the ground needs to do afterward, because that decides how far we take it.

Oak Ridge, High Point and Whitsett are in the same loop as Greensboro for us — same crew, same pricing basis.

Why Greensboro property owners call A&R

On a Greensboro driveway job the owner is the operator. Clark — veteran, firefighter — walks the route, writes the estimate and runs the machine that cuts the grade. What was discussed is what gets built.

Reach out to A&R Land Services for gravel driveway installation anywhere in Guilford County — new entrances, long drives, construction access and everything between.

Gravel Driveways in Greensboro: questions

What kind of gravel is best for a driveway in North Carolina?

ABC crushed stone, also called crusher run, for the base and often for the whole driveway. It's a mix of angular rock and stone dust from the local quarries that compacts into a hard, water-shedding surface. #57 stone on top gives a cleaner look but stays loose and rolls underfoot. Pea gravel and river rock look nice and don't lock together at all — avoid them on anything with a slope.

How thick should the gravel be on a new driveway?

Four to six inches of compacted ABC for a residential driveway on firm clay, more where trucks will run or the subgrade is soft. The thickness matters less than compaction and crown — six inches of loose stone on a flat, soft base will fail faster than four inches compacted on a crowned, firm one.

How far is A&R Land Services from Greensboro?

Greensboro is our home base. We're a Greensboro company, so mobilization in and around the city is as quick as it gets.

Do you handle gravel driveways near Piedmont Triad International Airport and Lake Townsend?

Yes. We work throughout Greensboro and the surrounding Guilford County area, including properties around Piedmont Triad International Airport, Lake Townsend and Bryan Boulevard. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach gravel driveways on Greensboro ground?

Lots with no driveway at all being prepared for a build or sale is the most common version of it around Greensboro. Final stone course spread and graded, edges feathered, entrance tied cleanly into the road, disturbed ground seeded. Drive it the same day. Surface course choice and distance from the quarry and from Greensboro is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.

Gravel Driveways in Greensboro, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate