A rural lot in McLeansville without a driveway is hard to build on and hard to sell. We cut and build entrances and drives across Guilford County, through woods, up slopes and across draws, and we size the base to what's actually going to drive on it.
The ground under a McLeansville driveway is almost always red clay, which is a fine subgrade when it's dry and firm and a terrible one when it's wet. That's why we strip to clay, crown the roadbed and get the ditches draining before any stone goes down on a Guilford County drive.



McLeansville ground conditions and how they shape gravel driveways
A lot of the McLeansville work we take is from people who bought a house on three to ten acres off Huffine Mill Road, Youngs Mill Road or Frieden Church Road and found out the back half is a jungle. They want the privet mulched, the fence line found, a pad for a shop and a gravel lane back to it. There's also a steady run of subdivision lot clearing along McLeansville Road and NC-61, plus a few larger pieces — old dairy and tobacco farms — that families are splitting and need building sites opened up on each parcel.
Around US-70, McLeansville Road and Frieden Church Road, the properties we're usually called to look like this:
- Subdivision build lots along McLeansville Road and NC-61 needing pine thickets cleared and pads leveled
- Shop and pole barn pads with gravel access lanes behind existing homes
- Three- to ten-acre homesteads off Huffine Mill, Youngs Mill and Frieden Church Road with overgrown back acreage and lost fence lines
What gravel driveways jobs look like around McLeansville
If you're near Frieden Church Road or Reedy Fork, odds are your situation is one we've already worked: subdivision build lots along McLeansville Road and NC-61 needing pine thickets cleared and pads leveled, or driveways that have to carry concrete and delivery trucks during construction.
The gravel driveways approach for Guilford County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.
Neighbors in Elon, Browns Summit and Greensboro call us for the same work; McLeansville sits right in the middle of that route.
Why McLeansville property owners call A&R
We build the base before we worry about the surface. Stripped subgrade, fabric if the ground is soft, ABC compacted in lifts, crown and ditches checked — that's why a driveway we build in Guilford County needs a blade pass every couple of years instead of a rebuild.
Send us the address and a plat or sketch of where you want the drive on your McLeansville property, and we'll come look. Free estimates, straight answers.
Gravel Driveways in McLeansville: questions
Why does my gravel driveway keep turning to mud?
Because the stone is sitting on clay or topsoil with no compacted base, no crown and no ditch. Water soaks in, the clay turns to pudding and the stone sinks into it. The fix is to rebuild the base properly — strip the soft material, fabric if needed, compacted ABC, crown and drainage. Adding more gravel on top of the mud just feeds it more gravel.
Do I need a permit for a new driveway in NC?
If the driveway connects to a state-maintained road, yes — NCDOT requires a driveway permit for a new entrance, and they'll specify the culvert size and sight-distance requirements. Driveways off private roads generally don't need a state permit, though some towns and counties have their own rules. We'll tell you what applies to your property.
How far is A&R Land Services from McLeansville?
We're based in Greensboro, about 15 minutes from McLeansville. Guilford County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle gravel driveways near US-70 and McLeansville Road?
Yes. We work throughout McLeansville and the surrounding Guilford County area, including properties around US-70, McLeansville Road and Frieden Church Road. If you're outside the town limits, send the address and we'll confirm it's in range.
How do you approach gravel driveways on McLeansville ground?
Hunting cabins and recreational property that need a reliable entrance is the most common version of it around McLeansville. ABC stone laid in lifts and compacted, culvert set at the entrance, ditches shaped and outlets established. The drive is checked for crown and drainage before the top goes on. Ditch length and how much cut-and-fill it takes to get the grade is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.