A&R Land Services installs gravel driveways in Gibsonville — from the NCDOT permit question at the road to the last pass of the blade at the garage. We're only about 20 minutes from Gibsonville, which matters on a job that moves this much stone.
A lot of Gibsonville lots are wooded right to the road, so the driveway starts with clearing. We mulch the route, pull the stumps, and the chips go to the sides as erosion control while the roadbed is cut. It's one mobilization from Greensboro instead of a clearing contractor and then a driveway contractor.



Gibsonville ground conditions and how they shape gravel driveways
Most of our Gibsonville work is on the edges — rural residential lots along NC-61 and NC-100, small farms off Burlington Road that are being split up, and the ground around the old textile mill village where homeowners want wooded back lots opened up. The Guilford side is seeing subdivisions push out from McLeansville and Whitsett, so we clear a lot of one- to two-acre build lots there. On the Alamance side there are still working hay and cattle operations where the fence lines have disappeared into honeysuckle and we get called to mulch them back out.
Around Boone Station Road, Gibsonville Town Park and Burlington Road (US-70), the properties we're usually called to look like this:
- Mill-village homes with wooded back lots full of privet and volunteer sweetgum
- Flat Iredell clay pastures that need ditching and drainage before the owner can run equipment on them
- One- to two-acre build lots on the Guilford side where subdivisions are pushing out from McLeansville and Whitsett
What gravel driveways jobs look like around Gibsonville
A typical Gibsonville call for gravel driveways looks like this: Mill-village homes with wooded back lots full of privet and volunteer sweetgum. We've handled that exact situation around Burlington Road (US-70) and NC-100 more times than we can count.
The other common one is New homes, shops and barns on rural lots, which usually means a tighter work area and more care around what stays.
If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.
Burlington, Elon and Whitsett are in the same loop as Gibsonville for us — same crew, same pricing basis.
Why Gibsonville property owners call A&R
On a Gibsonville driveway job the owner is the operator. Clark — veteran, firefighter — walks the route, writes the estimate and runs the machine that cuts the grade. What was discussed is what gets built.
Reach out to A&R Land Services for gravel driveway installation anywhere in Guilford / Alamance County — new entrances, long drives, construction access and everything between.
Gravel Driveways in Gibsonville: questions
What kind of gravel is best for a driveway in North Carolina?
ABC crushed stone, also called crusher run, for the base and often for the whole driveway. It's a mix of angular rock and stone dust from the local quarries that compacts into a hard, water-shedding surface. #57 stone on top gives a cleaner look but stays loose and rolls underfoot. Pea gravel and river rock look nice and don't lock together at all — avoid them on anything with a slope.
How thick should the gravel be on a new driveway?
Four to six inches of compacted ABC for a residential driveway on firm clay, more where trucks will run or the subgrade is soft. The thickness matters less than compaction and crown — six inches of loose stone on a flat, soft base will fail faster than four inches compacted on a crowned, firm one.
How far is A&R Land Services from Gibsonville?
We're based in Greensboro, about 20 minutes from Gibsonville. Guilford / Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle gravel driveways near Boone Station Road and Gibsonville Town Park?
Yes. We work throughout Gibsonville and the surrounding Guilford / Alamance County area, including properties around Boone Station Road, Gibsonville Town Park and Burlington Road (US-70). If you're outside the town limits, send the address and we'll confirm it's in range.
How do you approach gravel driveways on Gibsonville ground?
Lots with no driveway at all being prepared for a build or sale is the most common version of it around Gibsonville. We look at where the drive enters, how it climbs or crosses the property, where water will cross it and where it needs to end up. If the entrance is on a state road, we talk through the NCDOT permit. Surface course choice and distance from the quarry and from Greensboro is the factor that moves the price most on Guilford / Alamance County jobs, and we'll walk through it with you on site.