Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Site Prep & Excavation · Yadkin County · 1 hr from Greensboro

Pole Barn Pads in Boonville, NC

A compacted, drained pad built to your building's footprint — ready for the post crew or the slab.

A pole barn or shop in Boonville is only as good as the pad it sits on. A&R Land Services builds compacted, laser-leveled pads across Yadkin County — cut into the slope, filled in lifts, based with stone and graded so water goes around the building instead of through it.

Roof water is the thing most people overlook on a Boonville barn pad. A shed roof dumps along one wall, and if the pad edge there isn't graded to carry it away, the building sits in a puddle every storm. We shape the surrounding ground for that on every Yadkin County pad.

Cleared pad area beside a new storage shed among pine trees with the property owner looking on
Shed site cleared and leveled between the pines
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Boonville ground conditions and how they shape pole barn pads

Boonville is northern Yadkin County, a few miles off the Yadkin River on ground that rolls a little harder than Yadkinville's. Fairview and Clifford sandy loams dominate the ridges with Pacolet on the slopes and Chewacla in the bottoms along Logan Creek and the small branches running north to the river. It's dry, workable ground that carries a mulcher almost any month. The land use history is tobacco, and what you see now is the aftermath: cattle on the better ground, vineyards on the gravelly knolls, and Virginia pine, sweetgum and loblolly where nobody picked an option.

Around Rocky Branch Road, Flint Hill Road and US-601, the properties we're usually called to look like this:

  • Cattle farms toward Longtown and Nebo with pastures gone to pine and fence rows lost to honeysuckle
  • Yadkin River hunting and recreation tracts north of town needing trails, firebreaks and a camp site cleared
  • Ten- to twenty-acre homestead splits off old tobacco farms needing a pad, septic area and gravel drive

What pole barn pads jobs look like around Boonville

A typical Boonville call for pole barn pads looks like this: Cattle farms toward Longtown and Nebo with pastures gone to pine and fence rows lost to honeysuckle. We've handled that exact situation around US-601 and RagApple Lassie Vineyards more times than we can count.

The other common one is RV and boat storage buildings, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

We also cover pole barn pads in Yadkinville, Pilot Mountain and Mount Airy, so if you've got property in more than one spot we can often batch the work.

Why Boonville property owners call A&R

Being about 1 hour from Boonville means we can come back after the posts are set to prep for the slab without charging you a second full mobilization.

A pole barn pad in Boonville is usually a one or two day job. Call (336) 392-8138 and let's get it on the schedule.

Pole Barn Pads in Boonville: questions

How much does a pole barn pad cost in North Carolina?

Depends mostly on the slope and whether stone is included. A pad on nearly flat ground with the fill balanced on site is a day of machine work and the low end. A pad on a slope with several feet of fill on the low side, a crusher-run base and a drive to reach it is a bigger job. The building size matters less than the site. We stake it and give a written price after the walk-through.

Can you build a pad on a hillside?

Yes, and most rural lots around the Triad require it. The pad is cut into the uphill side and filled on the downhill side, with the fill compacted in lifts so the low corner doesn't settle under the slab. Very steep sites may need a retaining wall on the cut side; we'll tell you if yours does.

How far is A&R Land Services from Boonville?

We're based in Greensboro, about 1 hour from Boonville. Yadkin County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle pole barn pads near Rocky Branch Road and Flint Hill Road?

Yes. We work throughout Boonville and the surrounding Yadkin County area, including properties around Rocky Branch Road, Flint Hill Road and US-601. If you're outside the town limits, send the address and we'll confirm it's in range.

What should I expect from a pole barn pads job in Yadkin County?

Small commercial storage and contractor shops is the most common version of it around Boonville. We take the building dimensions from your supplier, confirm the location and the finished pad height, stake it with working overbuild, and set a laser benchmark. Stone base — included or not, and how deep is the factor that moves the price most on Yadkin County jobs, and we'll walk through it with you on site.

Pole Barn Pads in Boonville, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate